Luckylight 5mm Standard T-1 3/4 Type Full Color With Common Cathode LED Technical Data Sheet Part No.: LL-509RGBC2E-002 Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 1 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Features: ◇ Uniform light output. ◇ Low power consumption. ◇ I.C. Compatible. ◇ Long life-solid state reliability. ◇ The product itself will remain within RoHS compliant Version. Descriptions: ◇ The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. ◇ The Pure Green source color devices are made with InGaN on Sapphire substrate Light Emitting Diode. ◇ The Blue source color devices are made with InGaN on Sapphire substrate Light Emitting Diode. Applications: ◇ TV set. ◇ Monitor. ◇ Telephone. ◇ Computer. ◇ Circuit board, etc. Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 2 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Package Dimension: 3 5 [0.1970] 5.85 [0.2305] (COM) 1 ANODE BLUE 2 ANODE RED 3 COMMON CATHODE 4 ANODE GREEN 1 2 4 1 [0.039] 8.65 [0.341] 4.9 [0.193] 1 4 2 0.5 [0.020] 27.00[1.063] 0.5 [0.020] 23.00[0.906] 24.00[0.945] 25.00[0.984] 5 [0.197] 0.6 [0.024] 3 1.27 [0.050] 3.81 [0.150] Part No. Chip Material Lens Color AlGaInP LL-509RGBC2E-002 InGaN Source Color Hyper Red Water Clear Pure Green InGaN Blue Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25mm (.010″) unless otherwise noted. 3. Protruded resin under flange is 1.00mm (.039″) max. 4. Specifications are subject to change without notice. Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 3 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Absolute Maximum Ratings at Ta=25℃ Parameters Symbol Max. Hyper Red Power Dissipation Pure Green 65 PD 95 Blue Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Unit mW 95 IFP 100 mA Ultra Red Chip Forward Current IF 25 mA Pure Green Chip Forward Current IF 25 mA Blue Chip Continuous Forward Current IF 25 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +85℃ Storage Temperature Range Tstg -40℃ to +100℃ Lead Soldering Temperature [4mm (.157″) From Body] Tsld 260℃ for 5 Seconds Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 4 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Electrical Optical Characteristics at Ta=25℃ Parameters Luminous Intensity * Viewing Angle * Peak Emission Wavelength Dominant Wavelength Forward Voltage Reverse Current Symbol Emitting Color IV 2θ1/2 λp λd VF IR Min. Typ. Max. Hyper Red 1600 3200 --- Pure Green 2000 4000 --- Blue 1000 2000 --- Hyper Red --- 25 --- Pure Green --- 25 --- Blue --- 25 --- Hyper Red --- 632 --- Pure Green --- 520 --- Blue --- 468 --- Hyper Red --- 624 --- Pure Green --- 525 --- Blue --- 470 --- Hyper Red 1.60 2.00 2.60 Pure Green 2.80 3.40 3.80 Blue 2.80 3.40 3.80 Hyper Red --- --- 10 Pure Green --- --- 10 Blue --- --- 10 Unit Test Condition mcd IF=20mA (Note 1) Deg IF=20mA (Note 2) nm IF=20mA nm IF=20mA (Note 3) V IF=20mA µA VR=5V Notes: 1. Luminous Intensity Measurement allowance is ± 10%. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 5 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Hyper Red: Forward Current & Forward Voltage Ta=25℃ Ta=25℃ Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) 50 40 30 20 10 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward Voltage VF (V) 800 Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25℃ 1000 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 0.9 o 0.8 10 0 o 50 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. 0.5 0.3 0.1 0 0.2 0.4 0.6 Date: Dec./25/2005 60 o 70 o 80o 90 Page: 6 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Pure Green: Forward Current & Forward Voltage Ta=25℃ Ta=25℃ Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) 50 40 30 20 10 0 2.8 3.0 3.2 3.4 3.6 3.8 4.0 Forward Voltage VF (V) 800 Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25℃ 1000 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 0.9 o 0.8 10 0 o 50 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. 0.5 0.3 0.10 0.2 0.4 0.6 Date: Dec./25/2005 60 o 70 o 80o 90 Page: 7 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Blue: Forward Current & Forward Voltage Ta=25℃ Ta=25℃ Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) 50 40 30 20 10 0 2.8 3.0 3.2 3.4 3.6 3.8 4.0 Forward Voltage VF (V) 800 Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25℃ 1000 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 o 0.8 10 0 o 50 0.9 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. 0.5 0.3 0.1 0 0.2 0.4 0.6 Date: Dec./25/2005 60 o 70 o 80o 90 Page: 8 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Reliability Test Items And Conditions: The reliability of products shall be satisfied with items listed below: Confidence level: 90%. LTPD: 10%. 1) Test Items and Results: Test Item Standard Test Method Resistance to Soldering Heat JEITA ED-4701 300 302 Test Conditions 1 time 0/100 1time over 95% 0/100 0℃~100℃ 15sec, 15sec 100 cycles 0/100 100 cycles 0/100 10 cycles 0/100 1000hrs 0/100 Moisture Resistance Cycle High Temperature Storage Terminal Strength (Pull test) JEITA ED-4701 400 401 Load 10N (1kgf) 10±1sec Terminal Strength (bending test) JEITA ED-4701 400 401 Load 5N (0.5kgf) 0°~90°~0° bend 2 times Temperature Humidity Storage Low Temperature Storage Steady State Operating Life Steady State Operating Life of High Humidity Heat Steady State Operating Life of Low Temperature JEITA ED-4701 100 103 JEITA ED-4701 200 202 Thermal Shock Temperature Cycle Number of Damaged Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb Tsld=235±5℃, 5sec (using flux) JEITA ED-4701 300 303 JEITA ED-4701 300 307 JEITA ED-4701 100 105 JEITA ED-4701 200 203 JEITA ED-4701 200 201 Solder ability Note -40℃~25℃~100℃~25℃ 30min,5min,30min,5min 25℃~65℃~-10℃ 90%RH 24hrs/1cycle Ta=100℃ No noticeable damage No noticeable damage 0/100 0/100 Ta=60℃, RH=90% 1000hrs 0/100 Ta=-40℃ 1000hrs 0/100 Ta=25℃, IF=30mA 1000hrs 0/100 Ta=60℃, RH=90%, IF=30mA 500hrs 0/100 Ta=-30℃, IF=20mA 1000hrs 0/100 2) Criteria for Judging the Damage: Item Symbol Test Conditions Forward Voltage VF Reverse Current Luminous Intensity Criteria for Judgment Min Max IF=20mA --- F.V.*)×1.1 IR VR=5V --- F.V.*)×2.0 IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value. Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 9 OF 10 Drawn: Shu http://www.luckylightled.com Luckylight Please read the following notes before using the product: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 5. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded. Spec No.: B508 X360 Approved: ZHOU Rev No.: V.2 Checked: Wu Lucky Light Electronics Co., Ltd. Date: Dec./25/2005 Page: 10 OF 10 Drawn: Shu http://www.luckylightled.com