LUCKY-LIGHT LL-509RGBC2E-004

Luckylight
5mm Standard T-1 3/4 Type Full Color
With Common Anode LED
Technical Data Sheet
Part No.: LL-509RGBC2E-004
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 1 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Features:
◇ Uniform light output.
◇ Low power consumption.
◇ I.C. Compatible.
◇ Long life-solid state reliability.
◇ The product itself will remain within RoHS compliant Version.
Descriptions:
◇ The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light
Emitting Diode.
◇ The Pure Green source color devices are made with InGaN on Sapphire substrate Light
Emitting Diode.
◇ The Blue source color devices are made with InGaN on Sapphire substrate Light
Emitting Diode.
Applications:
◇ TV set.
◇ Monitor.
◇ Telephone.
◇ Computer.
◇ Circuit board, etc.
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 2 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Package Dimension:
3
5 [0.1970]
5.85 [0.2305]
(COM)
1 CATHODE GREEN
2 CATHODE BLUE
3 COMMON ANODE
4 CATHODE RED
1
2
4
1 [0.039]
8.65 [0.341]
4.9 [0.193]
1
4
2
0.5 [0.020]
27.00[1.063]
0.5 [0.020]
23.00[0.906]
24.00[0.945]
25.00[0.984]
5 [0.197]
0.6 [0.024]
3
1.27 [0.050]
3.81 [0.150]
Part No.
Chip Material
Lens Color
Source Color
AlGaInP
LL-509RGBC2E-004
InGaN
Hyper Red
Water Clear
InGaN
Pure Green
Blue
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25mm (.010″) unless otherwise noted.
3. Protruded resin under flange is 1.00 mm (.039″) max.
4. Specifications are subject to change without notice.
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 3 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Absolute Maximum Ratings at Ta=25℃
Parameters
Symbol
Max.
Hyper Red
Power Dissipation
Pure Green
65
PD
95
Blue
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
Unit
mW
95
IFP
100
mA
Ultra Red Chip Forward Current
IF
25
mA
Pure Green Chip Forward Current
IF
25
mA
Blue Chip Continuous Forward Current
IF
25
mA
Reverse Voltage
VR
5
V
Operating Temperature Range
Topr
-40℃ to +85℃
Storage Temperature Range
Tstg
-40℃ to +100℃
Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld
260℃ for 5 Seconds
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 4 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Electrical Optical Characteristics at Ta=25℃
Parameters
Luminous
Intensity *
Viewing Angle *
Peak Emission
Wavelength
Dominant
Wavelength
Forward Voltage
Reverse Current
Symbol Emitting Color
IV
2θ1/2
λp
λd
VF
IR
Min.
Typ.
Max.
Hyper Red
1600
3200
---
Pure Green
2000
4000
---
Blue
1000
2000
---
Hyper Red
---
25
---
Pure Green
---
25
---
Blue
---
25
---
Hyper Red
---
632
---
Pure Green
---
520
---
Blue
---
468
---
Hyper Red
---
624
---
Pure Green
---
525
---
Blue
---
470
---
Hyper Red
1.60
2.00
2.50
Pure Green
2.80
3.40
3.80
Blue
2.80
3.40
3.80
Hyper Red
---
---
10
Pure Green
---
---
10
Blue
---
---
10
Unit
Test
Condition
mcd
IF=20mA
(Note 1)
Deg
IF=20mA
(Note 2)
nm
IF=20mA
nm
IF=20mA
(Note 3)
V
IF=20mA
µA
VR=5V
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 5 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Hyper Red:
Forward Current & Forward Voltage
Ta=25℃
Ta=25℃
Forward Current IF (mA)
100
75
50
25
0
300
1000
400 500 600 700
Wavelength λp (nm)
Luminous Intensity &
Ambient Temperature
100
10
1
-60 -40 -20 0 20 40 60 80 100
Ambient Temperature Ta (℃)
50
40
30
20
10
0
1.4 1.6 1.8 2.0 2.2 2.4 2.6
Forward Voltage VF (V)
800
Luminous Intensity & Forward Current
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Spectrum Distribution
f=1KHz
Duty=1/10
100
10
1 0
10
Forward Current Derating Curve
Forward Current IF (mA)
Ta=25℃
1000
1
2
3
10
10
10
Forward Current IF (mA)
Radiation Diagram
50
o
0
o
10
Ta=25℃
o
20
o
30
40
o
40
30
25
20
1.0
0.9
o
0.8
10
0
o
50
0.7
0
20
40
60
80 100
Ambient Temperature Ta (℃)
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
0.5 0.3 0.1 0 0.2 0.4 0.6
Date: Dec/23/2007
60
o
70
o
80o
90
Page: 6 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Pure Green:
Forward Current & Forward Voltage
Ta=25℃
Ta=25℃
Forward Current IF (mA)
100
75
50
25
0
300
1000
400 500 600 700
Wavelength λp (nm)
Luminous Intensity &
Ambient Temperature
100
10
1
-60 -40 -20 0 20 40 60 80 100
Ambient Temperature Ta (℃)
50
40
30
20
10
0
2.8 3.0 3.2 3.4 3.6 3.8 4.0
Forward Voltage VF (V)
800
Luminous Intensity & Forward Current
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Spectrum Distribution
f=1KHz
Duty=1/10
100
10
1 0
10
Forward Current Derating Curve
Forward Current IF (mA)
Ta=25℃
1000
1
2
3
10
10
10
Forward Current IF (mA)
Radiation Diagram
50
o
0
o
10
Ta=25℃
o
20
o
30
40
o
40
30
25
20
1.0
o
0.8
10
0
o
50
0.9
0.7
0
20
40
60
80 100
Ambient Temperature Ta (℃)
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
0.5 0.3 0.10 0.2 0.4 0.6
Date: Dec/23/2007
60
o
70
o
80o
90
Page: 7 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Blue:
Forward Current & Forward Voltage
Ta=25℃
Ta=25℃
Forward Current IF (mA)
100
75
50
25
0
300
1000
400 500 600 700
Wavelength λp (nm)
Luminous Intensity &
Ambient Temperature
100
10
1
-60 -40 -20 0 20 40 60 80 100
Ambient Temperature Ta (℃)
50
40
30
20
10
0
2.8 3.0 3.2 3.4 3.6 3.8 4.0
Forward Voltage VF (V)
800
Luminous Intensity & Forward Current
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Spectrum Distribution
f=1KHz
Duty=1/10
100
10
1 0
10
Forward Current Derating Curve
Forward Current IF (mA)
Ta=25℃
1000
1
2
3
10
10
10
Forward Current IF (mA)
Radiation Diagram
50
o
0
o
10
Ta=25℃
o
20
o
30
40
o
40
30
25
20
1.0
0.9
o
0.8
10
0
o
50
0.7
0
20
40
60
80 100
Ambient Temperature Ta (℃)
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
0.5 0.3 0.1 0 0.2 0.4 0.6
Date: Dec/23/2007
60
o
70
o
80o
90
Page: 8 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
Standard
Test Item
Test
Method
Resistance to Soldering
Heat
JEITA ED-4701
300 302
Test Conditions
Note
Tsld=260±5℃, 10sec 3mm
from the base of the epoxy
bulb
Tsld=235±5℃, 5sec(using
flux)
1 time
0/100
1time
over 95%
0/100
0℃~100℃ 15sec, 15sec
100 cycles
0/100
100 cycles
0/100
10 cycles
0/100
1000hrs
0/100
Moisture Resistance
Cycle
High Temperature
Storage
JEITA ED-4701
300 303
JEITA ED-4701
300 307
JEITA ED-4701
100 105
JEITA ED-4701
200 203
JEITA ED-4701
200 201
Terminal Strength
(Pull test)
JEITA ED-4701
400 401
Load 10N (1kgf)
10±1sec
Terminal Strength
(bending test)
JEITA ED-4701
400 401
Load 5N (0.5kgf)
0°~90°~0° bend 2 times
Temperature Humidity
Storage
Low Temperature
Storage
Steady State Operating
Life
Steady State Operating
Life of High Humidity
Heat
Steady State Operating
Life of Low
Temperature
JEITA ED-4701
100 103
JEITA ED-4701
200 202
Solder ability
Thermal Shock
Temperature Cycle
Number
of
Damaged
-40℃~25℃~100℃~25℃
30min,5min,30min,5min
25℃~65℃~-10℃ 90%RH
24hrs/1cycle
Ta=100℃
No
noticeable
damage
No
noticeable
damage
0/100
0/100
Ta=60℃, RH=90%
1000hrs
0/100
Ta=-40℃
1000hrs
0/100
Ta=25℃, IF=30mA
1000hrs
0/100
Ta=60℃, RH=90%,
IF=30mA
500hrs
0/100
Ta=-30℃, IF=20mA
1000hrs
0/100
2) Criteria for Judging the Damage:
Item
Symbol
Test Conditions
Forward Voltage
VF
Reverse Current
Luminous Intensity
Criteria for Judgment
Min
Max
IF=20mA
---
F.V.*)×1.1
IR
VR=5V
---
F.V.*)×2.0
IV
IF=20mA
F.V.*)×0.7
---
*) F.V.: First Value.
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 9 OF 10
Drawn: Zhuang
http://www.luckylightled.com
Luckylight
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is
often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used. It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
5. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices equipment and machinery must be
properly grounded.
Spec No.: B508 X360
Approved: ZHOU
Rev No.: V.2
Checked: Wu
Lucky Light Electronics Co., Ltd.
Date: Dec/23/2007
Page: 10 OF 10
Drawn: Zhuang
http://www.luckylightled.com