EGL341A-EGL341J Surface Mount Rectifiers VOLTAGE RANGE: 50 --- 600 V CURRENT: 1.0 A Features ◇ DO - 213AA Plastic package has underwriters laboratories flammability classification 94V-0 SOLDERABLE ENDS ◇ Glass passivated chip junction ◇ For surface mount applications ◇ High temperature metallurgically bonded construction ◇ Cavity-free glass passivated junction ◇ High temperature soldering guaranteed:450 ℃/5 seconds 1.6± 0.1 0 D2=D1 ＋ －0.20 D1 D2 at terminals.Complete device sub-mersible temperature 0.5± 0.1 0.5± 0.1 of 265℃ for 10 seconds in solder bath 3.5± 0.2 Mechanical Data ◇ Case: JEDEC DO-213AA,molded plastic ◇ Polarity: Color band denotes cathode ◇ Weight: 0.0014 ounces, 0.036 grams ◇ Mounting position: Any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate current by 20%. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current TT=75℃ VRRM VRMS VDC EGL EGL EGL EGL EGL EGL EGL UNITS 341A 341B 341D 341F 341G 341H 341J 50 35 50 100 70 100 200 140 200 300 210 300 400 280 400 500 350 500 600 420 600 V V V I(AV) 1.0 A IFSM 30 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @1.0A Maximum reverse current @T A=25℃ at rated DC blocking voltage @T A=125℃ Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Typical thermal resistance (Note 3) Operating junction temperature range Storage temperature range VF IR trr Cj RθJA Tj TSTG 1.25 1.35 5.0 50 50 15 150 - 55 ---- +175 - 55 ---- +175 NOTE: 1. Measured with IF=0.5A,IR=1.0A,Irr=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal resistance from junction to ambient, 0.24×0.24"(6.0×6.0mm) copper pads to each terminal. http://www.luguang.cn mail:[email protected] 1.70 V µA ns pF K/W ℃ ℃ EGL341A-EGL341J Surface Mount Rectifiers Ratings AND Charactieristic Curves 1 .5 R E S IS T IV E O R IN D U C T IV E LOAD 1 .0 0 .8 0 .6 0 .4 0 .2 0 .2 X 0 .2 "(5 .0 X 5 .0 m m ) COPPER PAD AREAS 0 50 25 75 100 125 150 FIG.2 -- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT,AMPERES AVERAGE FORWARD RECTIFIED CURRENT,AMPERES FIG.1 -- FORWARD CURRENT DERATING CURV 175 TL=110℃ 8.3ms SINGLE HALF SINE-WAVE (JEDEC METHOD) 25 20 15 10 5 0 1 TERMINAL TEMPERATURE ℃ 100 10 NUMBER OF CYCLES AT 60HZ FIG.3 -- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 -- TYPICAL REVERSE CHARACTERISTICS EG L34 1F -EG EG L34 L34 1G 1H -EG L34 1J 10 1 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.01 .6 .8 1.0 1.2 1.4 1.6 1.8 f=1MHz TJ=25 20 10 4 2 1 .1 .2 .4 1.0 2 4 10 20 1 TA=25℃ 0.1 0.01 0 40 100 REVERSE VOLTAGE(V) http://www.luguang.cn 20 40 60 80 100 FIG.6 -- TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (oC/W) JUNCTION CAPACITANCE(pF) 100 TA=100℃ PERCENT OF RATED PEAK REVERSE VOLTAGE. ( ％) FIG.5 -- TYPICAL JUNCTION CAPACITANCE 40 TA=125℃ 10 2.0 INSTANTANEOUS FORWARD VOLTAGE(V) 60 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT(mA) EG L34 1A -EG L34 1D INSTANTANEOUS FORWARD CURRENT,AMPERES 100 100 10 1 0.1 0.01 0.1 1 10 T,PULSE DURATION, mail:[email protected] 100