FS1AB-FS1MB Surface Mount Rectifiers REVERSE VOLTAGE: 50 --- 1000 V CURRENT: 1.0A DO - 214AA(SMB) 111 Features Plastic package has underwriters laborator flammability classification 94V-0 4.7± 0.25 Low profile package 3.6± 0.3 2.0± 0.15 For surface mounted applications Built-in strain relief,ideal for automated placement Glass passivated chip junction 2.3± 0.15 11 5.4± 0.2 High temperature soldering: 1 250oC/10 seconds at terminals Mechanical Data 0.203MAX 11 0.2± 0.05 1.3± 0.2 Case:JEDEC DO-214AA,molded plastic over 11passivated chip Polarity: color band denotes cathode end Weight: 0.003 ounces, 0.093 gram Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified FS1AB FS1BB FS1DB FS1GB FS1JB FS1KB FS1MB UNITS Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRWS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forw ord rectified current c @ TL=90OC Peak forward surge current 8.3ms single c half-sine-wave superimposed on rated c load Maximum instantaneous forw ard voltage at 1.0A Maximum DC reverse current @TA=25oC at rated DC blocking voltage @T A=125oC 1.0 A IFSM 30.0 A VF 1.30 V IF(AV) Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ Typical thermal resitance (NOTE 3) 5.0 IR R R JA JL Operating junction and storage temperature range TJTSTG A 50.0 150 250 10 105 32 - 55 ------ + 150 NOTE: 1.Rev erse recov ery time test conditions:IF=0.5A,IR=1.0A,Irr=0.25A 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0 Volts 3. Thermal resistance f rom junction to ambient and junction to lead P.C.B.mounted on 0.2''X0.2''(5.0X5.0mm2) copper pad areas http://www.luguang.cn mail:[email protected] 500 ns 7.0 pF o C/W o C FS1AB-FS1MB Surface Mount Rectifiers Ratings AND Charactieristic Curves Fig. 1 — Forward Current Derating Curve 50 1.2 Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) Fig. 2 — Maximum Non-Repetitive Peak Forward Surge Current 1.0 0.5 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 0 20 40 60 80 100 120 140 160 40 30 20 10 0 180 TL = 90°C 8.3ms Single Half Sine-Wave (JEDEC Method) Lead Temperature (°C) Number of Cycles at 60 HZ Fig. 3 — Typical Instantaneous Forward Characteristics Fig. 4 — Typical Reverse Characteristics 30 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 30 10 TJ = 125°C 1 TJ = 25°C Pulse Width = 300µs 1% Duty Cycle 0.1 0.01 0.4 10 TJ = 125°C 1 TJ = 100°C 0.1 TJ = 25°C 0.01 0.6 0.8 1.2 1 1.4 1.6 40 20 0 1.8 Instantaneous Forward Voltage (V) 80 60 100 Percent of Rated Peak Reverse Voltage (%) Fig. 6 — Typical Transient Thermal Impedance Fig. 5 — Typical Junction Capacitance TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p 10 1 1 10 Reverse Voltage (V) http://www.luguang.cn 100 Transient Thermal Impedance (°CW) 100 30 Junction Capacitance (pF) 100 10 1 Mounted on 0.2 x 0.2" (5 x 5mm) Copper Pad Area 10 1 0.01 0.1 1 t, Pulse Duration (sec.) mail:[email protected] 10