LUXEON Z LUXEON Z ES Breakthrough luminance, design flexibility and optical control for Illumination solutions Introduction Philips Lumileds technology enables the new LUXEON® Z and LUXEON Z ES LEDs. The LUXEON Z is a family of micro sized Illumination grade emitters that is the first ever 1-step MacAdam Ellipse warm white LED that enables never before seen color consistency, luminance, flux density and design flexibility for next generation lighting solutions. LUXEON Z family is undomed, a feature that provides un-matched optical flexibility for precise beam angle control. Tested and binned at application conditions 85°C, the LUXEON Z and Z ES emitters are an ideal choice for indoor and outdoor light sources requiring superior beam angles, higher efficiency and lower costs. Features Benefits Key Applications •Micro sized: LUXEON Z, 1.3x1.7 mm and LUXEON Z ES, 1.6X2.0 mm •Undomed device architecture •Hot tested at 85°C •Up to 1 A max drive current •Freedom from Binning •1, 3, 5 step MCE options •Lowest thermal resistance 3°C/W •Highest luminance to deliver punch •Ultimate design flexibility from micro form factor •Precise optical control from an undomed architecture •Enables small customizable and scalable light engines •Leading system level lm/$ proposition •Indoor area •Lamps - MR16, PAR, GU10 and Candles •Outdoor area - High-flux street light modules •Specialty lighting •Architectural LUXEON Z and LUXEON Z ES Datasheet DS120 ©2013 Philips Lumileds Lighting Company. Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mechanical Dimensions of LUXEON Z ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mechanical Dimensions of LUXEON Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical Spatial Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Emitter Pocket Tape Packaging for LUXEON Z ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Emitter Reel Packaging for LUXEON Z ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Emitter Pocket Tape Packaging for LUXEON Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Emitter Reel Packaging for LUXEON Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Luminous Flux and Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 LUXEON Z and LUXEON Z ES: 1-step, 3-step (above and below blackbody) and 5-step Mac Adam Ellipse Color Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON Z and Z ES emitters are specified and binned under “hot” conditions comparable to those found in “real-world” lighting products. The test conditions for LUXEON Z ES and LUXEON Z are 700 mA DC and 500 mA DC respectively with junction temperature at 85°C The part number designation is explained as follows: L X Z n - a b c d - y Where: n — 1 for LUXEON Z and 2 for LUXEON Z ES a, b — designates nominal ANSI CCT (27 for 2700K, 30 for 3000K, RB for Royal Blue) c, d — designates minimum CRI performance (7 for 70 CRI, 8 for 80 CRI, 9 for 90 CRI) y — 1 designates 1 SDCM, 3 designates 3 SDCM and 5 designates 5 SDCM (only for 80 and 90 CRI versions. Lower than equal to 70 CRI parts will not have a SDCM designate and all parts will be within 5 step MCE). Therefore, 3 SDCM 2700K/80 CRI LUXEON Z ES will have the following part number: LXZ2–2780-3 Therefore, 5 SDCM 3000K/80 CRI LUXEON Z will have the following part number: LXZ1–3080-5 Average Lumen Maintenance Characteristics LUXEON Z products are tested in compliance with LM-80. Please visit www.philipslumileds.com/support/documentation/ lumen-maintenance or contact your local Philips Lumileds Technical Solutions Manager for TM-21 extrapolations or other support. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z and LUXEON Z ES products are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON Z and LUXEON Z ES: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 2 Product Selection Product Selection Guide for LUXEON Z ES Emitters Junction Temperature = 85°C Table 1. LUXEON Z ES @ 700 mA Typ flux (Lm) Typ. Vf @ 1A Typ. Lm/W Typ flux (Lm) Typ. Vf @ 350 mA Part Number Normal CCT / CRI Min Flux (lm) Typ. Lm/W Typ flux (Lm) Typ. Vf Typ. Lm/W LXZ2-2780-Y 2700 / 80 160 175 2.85 88 224 2.90 77 99 2.77 102 LXZ2-2790-Y 2700 / 90 110 135 2.85 68 178 2.90 61 78 2.77 81 LXZ2-3080-Y 3000 / 80 160 180 2.85 91 238 2.90 82 104 2.77 108 LXZ2-3090-Y 3000 / 90 120 145 2.85 73 178 2.90 61 78 2.77 81 LXZ2-3580-Y 3500 / 80 170 190 2.85 95 244 2.90 84 107 2.77 111 LXZ2-4080-Y 4000 / 80 180 195 2.85 98 257 2.90 89 113 2.77 117 LXZ2-4070 4000 / 70 190 210 2.85 106 277 2.90 96 122 2.77 126 LXZ2-5070 5000 / 70 200 215 2.85 108 284 2.90 98 125 2.77 129 LXZ2-5770 5700 / 70 200 215 2.85 108 284 2.90 98 125 2.77 129 Notes for Table 1: 1. All LUXEON Z ES emitters are tested and binned at 700 mA/85C. 2. Philips Lumileds maintains a tolerance of ± 6.5% on luminous flux and ± 2 on CRI measurements. Product Selection for LUXEON Z Emitters Junction Temperature = 85°C Table 2. LUXEON Z @ 500 mA @ 700 mA @ 350 mA Part Number Normal CCT / CRI Min Flux (lm) Typ flux (Lm) Typ. Vf Typ. Lm/W Typ flux (Lm) Typ. Vf Typ. Lm/W Typ flux (Lm) Typ. Vf Typ. Lm/W LXZ1-2780-Y 2700 / 80 90 105 2.85 74 134 2.89 66 81 2.81 82 LXZ1-3080-Y 3000 / 80 100 110 2.85 78 141 2.89 70 85 2.81 86 LXZ1-4080-Y 4000 / 80 100 126 2.85 89 161 2.89 80 97 2.81 99 LXZ1-4070 4000 / 70 100 132 2.85 93 169 2.89 84 102 2.81 103 LXZ1-5070 5000 / 70 110 142 2.85 100 182 2.89 90 109 2.81 111 LXZ1-5770 5700 / 70 110 148 2.85 104 189 2.89 94 114 2.81 116 LXZ1-6565 6500 / 65 110 135 2.85 95 173 2.89 85 104 2.81 106 Notes for Table 2: 1. All LUXEON Z emitters above are tested and binned at 500 mA/85C. 2. Philips Lumileds maintains a tolerance of ± 6.5% on luminous flux and ± 2 on CRI measurements. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 3 Optical Characteristics LUXEON Z ES at Test Current 700 mA, Junction Temperature 85°C & LUXEON Z at Test Current 500 mA, Junction Temperature 85°C Table 3. Nominal ANSI CCT Color Temperature CCT Typical Typical Total Included Angle2 (degrees) u Typical Viewing Angle3 (degrees) 2u 1/2 2700K 2725K 160 120 3000K 3045K 160 120 3500K 3465K 160 120 4000K 3985K 160 120 5000K 5028K 160 120 5700K 5665K 160 120 0.90V Notes for Table 3: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. Electrical Characteristics LUXEON Z ES at Test Current 700 mA, Junction Temperature 85°C & LUXEON Z at Test Current 500 mA, Junction Temperature 85°C Table 4. Min. Max. Typical Temperature Coefficient of Forward Voltage2 (mV/°C) DVF / DTJ 2700K 2.5 3.25 -1.6 3 3000K 2.5 3.25 -1.6 3 3500K 2.5 3.25 -1.6 3 4000K 2.5 3.25 -1.6 3 5000K 2.5 3.25 -1.6 3 5700K 2.5 3.25 -1.6 3 6500K 2.5 3.25 -1.6 3 Nominal ANSI CCT Forward Voltage V, 1 (V) Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C Notes for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between TJ = 25°C and TJ = 110°C at If = 700 mA. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 4 Absolute Maximum Ratings Table 5. Parameter LUXEON Z ES DC Forward Current (mA)1, 2 1050 700 Peak Pulsed Forward Current (mA)1, 3 1200 1000 ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-E < 8000V Human Body Model (HBM) Class 3A JESD22-A114-E LED Junction Temperature1 135°C 135°C Operating Case Temperature at 700 mA -40°C - 135°C -40°C - 135°C Storage Temperature -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 Reverse Voltage (Vr) 5, 6 LUXEON Z LUXEON Z LEDs are not designed to be driven in reverse bias Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application Brief AB106. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies 3. ≥ 100 Hz and amplitude ≤ 200 mA are acceptable, assuming the average current throughout each cycle does not exceed 1000 mA. 4. Pulsed operation with a peak drive current of 1200 mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50% 5. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5V and the reverse current is less than 200μA. 6. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition. JEDEC Moisture Sensitivity Table 6. 1 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions unlimited [ 30°C / 85% RH 168h +5/-0 85°C / 85% RH LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 5 Mechanical Dimensions of LUXEON Z ES Figure 1. Package outline drawing for LUXEON Z ES. Notes for Figure 1: 1. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 6 Mechanical Dimensions of LUXEON Z Figure 2. Package outline drawing for LUXEON Z. Notes for Figure 2: 1. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 7 Solder Pad Design Figure 3. Layout design B. Recommended PCB footprint for LUXEON Z ES for high component count density based on solder mask defined pads. Dimensions in mm.. Notes for Figure 3: 1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB). 2. Application Brief AB202 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com and www.philipslumileds.cn.com. Figure 4. Solder pad layout for LUXEON Z. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 8 Relative Spectral Distribution Relative Spectral Distribution vs. Wavelength Characteristics Figure 5. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 9 Light Output Characteristics Relative Light Output vs. Thermal Pad Temperature for LUXEON Z ES, Test Current at 700 mA Figure 6. Relative Light Output vs. Forward Current for LUXEON Z ES, Thermal Pad temperature = 85°C Figure 7. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 10 Forward Current Characteristics for LUXEON Z ES, Thermal Pad Temperature = 85°C Figure 8. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 11 Relative Light Output vs. Thermal Pad Temperature for LUXEON Z White, Test Current at 500 mA Figure 9. Relative Light Output vs. Forward Current for LUXEON Z White, Thermal Pad Temperature = 85°C Figure 10. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 12 Forward Current Characteristics for LUXEON Z White, Thermal Pad Temperature = 85°C Figure 11. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 13 Typical Spatial Radiation Pattern LUXEON Z ES Figure 12. LUXEON Z ES Typical Polar Radiation Pattern Figure 13. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 14 Typical Spatial Radiation Pattern LUXEON Z 120% Relative Intensity (%) 100% 80% 60% 40% White (LXZ1-4070) 20% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Anglular Displacement (deg) Figure 14. LUXEON Z Typical Polar Radiation Pattern -30° 1 0° 30° 0.8 0.6 -60° 60° 0.4 0.2 -90° 90° 0 White (LXZ1-4070) -120° -150° 120° 150° 180° Figure 15. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 15 Emitter Pocket Tape Packaging for LUXEON Z ES Figure 16. Emitter pocket tape packaging for LUXEON Z ES. Notes for Figure 16: 1. All dimensions are in millimeters Emitter Reel Packaging for LUXEON Z ES Figure 17. Emitter reel packaging for LUXEON Z ES. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 16 Emitter Pocket Tape Packaging for LUXEON Z Figure 18. Emitter pocket tape packaging for LUXEON Z. Notes for Figure 18: 1. All dimensions are in millimeters LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 17 Emitter Reel Packaging for LUXEON Z Figure 19. Emitter reel packaging for LUXEON Z. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 18 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux and forward voltage (Vf). Color is offered in a single 1 step, 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT color bins. For additional information please review the MacAdam ellipse technical definition section. Decoding Product Bin Labeling LUXEON Z ES and LUXEON Z emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Reels of LUXEON Z emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A= Flux/Radiometric power bin (L, M, etc.) B and C = Color Bin (5A, 5B, 5C, 5D, 3U, 3L, 01) D = Vf bin (P, R) LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 19 Luminous Flux and Forward Voltage Bins Table 7 lists the standard photometric luminous flux bins for LUXEON Z ES and LUXEON Z emitters (tested and binned at 700 mA and 500 mA Tj = 85°C). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) A 100 110 B 110 120 C 120 130 D 130 140 E 140 150 F 150 160 G 160 170 H 170 180 J 180 190 K 190 200 L 200 210 M 210 220 N 220 230 P 230 240 Table 8 lists minimum and maximum Vf bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 8. Vf Bins Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) P 2.50 2.75 R 2.75 3.00 S 3.00 3.25 LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. 20 LUXEON Z and LUXEON Z ES: 1-step, 3-step (above and below blackbody) and 5-step MacAdam Ellipse Color Definition Bin 3U[1] B1 B2 B3 B4 Bin 3L[2] bin 3U denotes the area ABOVE BBL enclosed by 3-step MAE and (outside) 1-step MAE bin 3L denotes the area BELOW BBL enclosed by 3-step MAE and (outside) 1-step MAE B1 to B4 are intersection points on BBL [1] Color [2] Color 1-step MAE 3-step MAE BBL Color Space Definition for Above and Below Blackbody Parameter Definition of MacAdam Ellipse Table 9. LUXEON Z and LUXEON Z ES 1-step MacAdam Ellipse Parameters Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 2700K Single 1-step MacAdam ellipse (0.4578, 0.4101) 0.00270 0.00140 53.70 3000K Single 1-step MacAdam ellipse (0.4338, 0.4030) 0.00278 0.00136 53.22 3500K Single 1-step MacAdam ellipse (0.4073, 0.3917) 0.00309 0.00138 54.00 Table 10. LUXEON Z and LUXEON Z ES 3-step MacAdam Ellipse Parameters Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.7 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.2 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.7 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.6 Table 11. LUXEON Z and LUXEON Z ES 5-step MacAdam Ellipse Parameters Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.7 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.0 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09 Note for Tables 9, 10 & 11: • Philips Lumileds maintains a tester tolerance of ± 0.005 on x, y color coordinates. LUXEON Z and LUXEON Z ES Datasheet DS120 20130517 ©2013 Philips Lumileds Lighting Company. RoHS COMPLIANT 21 Company Information Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2013 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON Z and LUXEON Z ES Datasheet DS120 20130517