LUXEON Rebel ES Leading efficacy and light output, maximum design flexibility Introduction LUXEON® Rebel ES gives you the flexibility you need for designing luminaires and lamps. Tested and binned at 700 mA, confidently design LUXEON Rebel ES into high lumen applications or create more energy efficient devices using the same emitter. Luminaire manufacturers and designers count on LUXEON Rebel ES for quality, reliability and in-device performance. Features and Benefits Key Applications •Broad portfolio of emitters for indoor and outdoor applications •CCT and CRI combinations to support a wide range of applications •Highest lumens per watt and lumens per dollar •Lowest forward voltage •Industry Standard ANSI color binning •Superior >125lm/W efficacy enables efficient and sustainable applications •Industry leading lumen maintenance •Complete design resources available to support your application development •Outdoor •Portable Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Relative Spectral Distribution vs. Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Typical Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Typical Luminous Efficacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Typical Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 LUXEON Rebel ES ANSI 1/4th Quadrant Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON Rebel ES is tested and binned at 700 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. The LUXEON Rebel ES family of emitters contain a series of LEDs designed for Illumination applications. The part number designation for the LXML series is explained as follows: LXML-ABCD Where: A — designates radiation pattern (value P for Lambertian) B — designates color (W for White) C — designates color variant (C for Cool-White, N for Neutral-White) D — designates test current (value 2 for 700 mA) The part number designation for the LXW8 series is explained as follows: L XWA - B C D E Where: A — designates minimum CRI performance (value 8 = 80 minimum and 9 = 90 minimum) B — designates radiation pattern (value P for Lambertian) C — designates color (value W = White) D & E — designates nominal ANSI CCT (value 27 = 2700K, 30 = 3000K, 35 = 3500K, 40 = 4000K and 50 = 5000K) The part number designation for the LXH7 series is explained as follows: LXHA-BCDE Where: A — designates minimum CRI performance (value 7 = 70 minimum) B — designates radiation pattern (value P for Lambertian) C — designates color (value W = White) D & E — designates nominal ANSI CCT (value 40 = 4000K)) Therefore products tested and binned at 700 mA follow the part numbering scheme: L X M L - P W x 2, L X W x - P W x x and L X H 7 - P W x x LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 2 Average Lumen Maintenance Characteristics Lumen maintenance for solid state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that LUXEON Rebel ES products will deliver, on average, 70% lumen maintenance (L70) at 50,000 hours of operation at a forward current of 1000 mA. This projection is based on constant current operation with junction temperature maintained at or below 135°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel ES is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel ES: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 3 Product Selection Guide for LUXEON Rebel ES Thermal Pad Temperature = 25°C Table 1. Performance at Test Current (700 mA) Nominal CCT/Color Part Number Minimum CRI Typical CRI Min Luminous Flux (lm) [1] 4100K Neutral White LXML-PWN2 60 65 200 5650K Cool White LXML-PWC2 60 70 200 2700K LXW9-PW27 90 95 120 3000K LXW9-PW30 90 95 120 3500K LXW8-PW35 80 85 160 4000K LXH7-PW40 70 75 180 4000K LXW8-PW40 80 85 170 5000K LXW8-PW50 80 85 180 Note for Table 1: 1. Minimum luminous flux performance within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on luminous flux measurements. Typical Luminous Flux Characteristics at 350 mA, 700 mA and 1000 mA for LUXEON Rebel ES, Thermal Pad Temperature = 25ºC Table 2. Nominal CCT/Color Part Number Typical Luminous Flux (lm) @ 350 mA Forward Current [1] Typical Luminous Flux (lm) @ 700 mA Forward Current [1] Typical Luminous Flux (lm) @ 1000 mA Forward Current [1] 4100K Neutral White LXML-PWN2 130 230 310 5650K Cool White LXML-PWC2 135 235 320 2700K LXW9-PW27 75 135 184 3000K LXW9-PW30 81 145 197 3500K LXW8-PW35 103 185 252 4000K LXH7-PW40 114 205 279 4000K LXW8-PW40 106 190 258 5000K LXW8-PW50 111 200 272 Note for Table 2: 1. Typical luminous flux performance within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on luminous flux measurements. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 4 Optical Characteristics for LUXEON Rebel ES at Test Current [1] Thermal Pad Temperature = 25°C Table 3. Nominal CCT Part Number 4100K Neutral White 5650K Cool White Color Temperature CCT Maximum Typ Total Included Angle [2] (degrees) u0.90V Typ Viewing Angle [3] (degrees) 2u 1/2 Minimum Typical LXML-PWN2 3500 K 4100 K 4500 K 160 120 LXML-PWC2 4500 K 5650 K 10000 K 160 120 2700K LXW9-PW27 2580 K 2725 K 2870 K 160 120 3000K LXW9-PW30 2870 K 3045 K 3220 K 160 120 3500K LXW8-PW35 3220 K 3465 K 3710 K 160 120 4000K LXH7-PW40 3710 K 3985 K 4260 K 160 120 4000K LXW8-PW40 3710 K 3985 K 4260 K 160 120 5000K LXW8-PW50 4745 K 5028 K 5311 K 160 120 Notes for Table 3: 1. Test current is 700 mA for all LXML-PWx2, LXWx-PWxx and LXH7-PWxx emitters. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 5 Electrical Characteristics at 700 mA for LUXEON Rebel ES Thermal Pad Temperature = 25ºC Table 4. Forward Voltage Vf [1] (V) Typ. Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C 3.25 -2.0 to -4.0 6 3.25 -2.0 to -4.0 6 3.25 -2.0 to -4.0 6 3.25 -2.0 to -4.0 6 2.90 3.25 -2.0 to -4.0 6 2.90 3.25 -2.0 to -4.0 6 2.5 2.90 3.25 -2.0 to -4.0 6 2.5 2.90 3.25 -2.0 to -4.0 6 Nominal CCT/Color Part Number 4100K Neutral White LXML-PWN2 2.5 2.90 5650K Cool White LXML-PWC2 2.5 2.90 2700K LXW9-PW27 2.5 2.90 3000K LXW9-PW30 2.5 2.90 3500K LXW8-PW35 2.5 4000K LXH7-PW40 2.5 4000K LXW8-PW40 5000K LXW8-PW50 Minimum Typical Maximum Notes for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C = TJ = 110°C at If = 700 mA. Typical Electrical Characteristics at 350 mA, 700 mA and 1000 mA for LUXEON Rebel ES Thermal Pad Temperature = 25ºC Table 5. Nominal CCT/Color Part Number Typical Forward Voltage Vf (V) @ 350 mA Forward Current Typical Forward Voltage Vf (V) @ 700 mA Forward Current Typical Forward Voltage Vf (V) @ 1000 mA Forward Current 4100K Neutral White LXML-PWN2 2.75 3.00 3.10 5650K Cool White LXML-PWC2 2.75 3.00 3.10 2700K LXW9-PW27 2.75 3.00 3.10 3000K LXW9-PW30 2.75 3.00 3.10 3500K LXW8-PW35 2.75 3.00 3.10 4000K LXH7-PW40 2.75 3.00 3.10 4000K LXW8-PW40 2.75 3.00 3.10 5000K LXW8-PW50 2.75 3.00 3.10 Notes for Table 5: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 6 Absolute Maximum Ratings Table 6. Parameter LUXEON Rebel ES DC Forward Current (mA) 1000 [2] Peak Pulsed Forward Current (mA) 1200 [3] ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A JESD22-A114-E LED Junction Temperature [1] 150°C Operating Case Temperature at 700 mA -40°C - 135°C Storage Temperature -40°C - 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vr) LUXEON Rebel ES LEDs are not designed to be driven in reverse bias Notes for Table 6: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application Brief AB33. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple’, with frequencies ≥ 100 Hz and amplitude ≤ 200 mA are acceptable, assuming the average current throughout each cycle does not exceed 1000 mA. 3. Pulsed operation with a peak drive current of 1200 mA is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%. JEDEC Moisture Sensitivity Table 7. 1 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions unlimited [ 30°C / 85% RH 168h +5/-0 85°C / 85% RH LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 7 Reflow Soldering Characteristics JEDEC 020c Temperature profile for Table 8. Table 8. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature (TL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes for Table 8: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. 2. For additional information on thermal measurement guidelines please refer to Application Brief AB33. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 8 Mechanical Dimensions Notes for Figure 1: Figure 1. Package outline drawing. 1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 9 Pad Configuration 3 1 3 2 TOP 2 1 BOTTOM PAD FUNCTION 1 CATHODE 2 ANODE 3 THERMAL Figure 2. Pad configuration. Note for Figure 2: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. Solder Pad Design Figure 3. Solder pad layout. Notes for Figure 3: 1. The photograph shows the recommended LUXEON Rebel ES layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W. 2. Application Brief AB32 provides extensive details for this layout. Printed Circuit Board layout files (.dwg) are available at www.philipslumileds.com and www.philipslumileds.cn.com. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 10 Relative Spectral Distribution vs. Wavelength Characteristics LXML-PWN2 (4100K) Neutral-White at Test Current, Thermal Pad Temperature = 25°C Relative Spectral Power Distribution ribution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength nm Figure 4. Color spectrum of LXML-PWN2 emitter, integrated measurement. LXML-PWC2 (5650K) Cool-White at Test Current, Thermal Pad Temperature = 25°C Relative Spectral Power Distribution stribution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength nm Figure 5. Color spectrum of LXML-PWC2 emitter, integrated measurement. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 11 LXW9-PW27 (2700K) at Test Current, Thermal Pad Temperature = 25°C Rela ative Specttral Power Distributio on 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 6. Color spectrum of LXW9-PW27 emitter, integrated measurement. LXW9-PW30 (3000K) at Test Current, Thermal Pad Temperature = 25°C Re elative Spe ectral Powe er Distributtion 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 7. Color spectrum of LXW9-PW30 emitter, integrated measurement. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 12 LXW8-PW35 (3500K) at Test Current, Thermal Pad Temperature = 25°C Relative S Spectral Po ower Distribution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 8. Color spectrum of LXW8-PW35 emitter, integrated measurement. LXH7-PW40 (4000K) at Test Current, Thermal Pad Temperature = 25°C Rellative Specctral Power Distributiion 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 9. Color spectrum of LXH7-PW40 emitter, integrated measurement. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 13 LXW8-PW40 (4000K) at Test Current, Thermal Pad Temperature = 25°C Re elative Spe ectral Pow wer Distribu ution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 10. Color spectrum of LXW8-PW40 emitter, integrated measurement. LXW8-PW50 (5000K) at Test Current, Thermal Pad Temperature = 25°C Relative Spectral S Po ower Distrribution 1 0.8 0.6 0.4 0.2 0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Figure 11. Color spectrum of LXW8-PW50 emitter, integrated measurement. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 14 Typical Light Output Characteristics Typical Relative Luminous Flux Vs. Temperature for LUXEON Rebel ES Emitters at Test Current 1.200 1.100 1.000 Relativ ve Lumino ous Flux 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 -20 0.000 0 20 40 60 80 100 120 140 Thermal Pad Temperature [°C] Figure 12. Relative light output vs. thermal pad temperature. Typical Forward Current Characteristics 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K at Test Current, Thermal Pad Temperature = 25°C 1000 900 Forw ward Curre ent [mA] 800 700 600 500 400 300 200 100 0 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05 Forward Voltage [V] Figure 13. Forward current vs. forward voltage. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 15 Typical Luminous Efficacy Typical Luminous Efficacy Characteristic vs. Forward Current for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters 1.600 Normalize ed Lumino ous Effica acy 1 400 1.400 1.200 1.000 0.800 0 600 0.600 0.400 0.200 0.000 0 100 200 300 400 500 600 700 800 900 1000 Forward Current [mA] Figure 14. Typical luminous efficacy characteristic vs. forward current, thermal pad temperature = 25ºC. Typical Relative Luminous Flux vs. Forward Current for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters. Thermal Pad Temperature = 25°C 1.600 1 400 1.400 Relattive Lumin nous Flux x 1.200 1.000 0.800 0.600 0 600 0.400 0.200 0.000 0 100 200 300 400 500 600 700 800 900 1000 Forward Current [mA] Figure 15. Typical relative luminous flux vs. forward current, thermal pad temperature = 25ºC. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 16 Typical Relative Luminous Efficacy vs. Temperature 1.200 1.100 Normalizzed Lumin nous Effic cacy 1.000 0.900 0.800 0.700 0.600 0.500 0.400 0.300 0.200 0.100 -20 0.000 0 20 40 60 80 100 120 140 Thermal Pad Temperature [°C] Figure 16. Relative luminous efficacy vs. thermal pad temperature, test current 700 mA. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 17 Current Derating Curves Current Derating Curves at 350 mA Forward Current Operation for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters 400 IF - Forward Current mA 350 300 250 15°C/W 200 25°C/W 150 35°C/W 100 45°C/W 50 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 17. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. Current Derating Curves at 700mA Forward Current Operation for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters 800 IF - Forward Current mA 700 600 500 1 °C/W 15°C/W 400 25°C/W 300 35°C/W 200 100 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 18 Current Derating Curves at 1000 mA Forward Current Operation for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters 1200 IF - Forward ard Current mA 1000 800 600 15°C/W 400 25°C/W 200 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature °C Figure 19. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 19 Typical Radiation Pattern Typical Spatial Radiation Pattern for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters 100% 90% 80% Relative ative Intensity 70% 60% 50% 40% 30% 20% 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (degrees) Figure 20. Typical representative spatial radiation pattern for 4100K neutral white, 5650K cool white, 2700K, 3000K 3500K, 4000K and 5000K lambertian. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 20 Emitter Pocket Tape Packaging 20 1000 LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 50 21 Emitter Reel Packaging LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 22 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf ). Decoding Product Bin Labeling LUXEON Rebel ES emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of LUXEON Rebel ES emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (P, Q, R, S etc.) B & C = Color bin (W0, V0, U0 etc. for LXML-PWx2 series. 7A, 7B, 7C and 7D for LXWx-PWxx series. 5W, 5X, 5Y and 5Z for LXH7-PW40 emitter) D = Vf bin (P, R, S and T) LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 23 Luminous Flux Bins Table 9 lists the standard photometric luminous flux bins for LUXEON Rebel ES emitters (tested and binned at 700 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 9. Flux Bins * Bin Code Min Photometric Flux (lm) Max Photometric Flux (lm) P 120 140 Q 140 160 R 160 * 180 S 180 200 T 200 220 U 220 240 V 240 260 W 260 280 X 280 300 170 lm for LXW8-PW4 Beginning in March 2013, LUXEON Rebel ES will transition to 10 lumen flux bins as shown in the table below. This transition may result in mixed shipments of old bin codes and new bin codes during calendar year 2013. Table 10. Flux Bins Bin Code Min Photometric Flux (lm) Max Photometric Flux (lm) 1 120 130 2 130 140 3 140 150 4 150 160 5 160 170 6 170 180 7 180 190 8 190 200 9 200 210 A 210 220 B 220 230 C 230 240 D 240 250 E 250 260 F 260 270 G 270 280 H 280 290 J 290 300 LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 24 4100K Neutral White Bin Structure 4100K Neutral White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 12 Color Bins, CCT Range 3,500K to 4,500K. 0.44 3500K 3800K 0.42 RM 4100K SM 4500K RN 0.40 TM blackbody locus SN R0 TN 0.38 y S0 RP T0 SP 0.36 TP 0.34 0.32 0.33 0.35 0.37 x 0.39 0.41 0.43 Figure 21. 4100K Neutral White bin structure. Table 11. 4100K Neutral White Bin Coordinates Bin Code x y TM 0.367294 0.385953 0.381106 0.364212 0.400290 0.412995 0.393747 0.382878 0.364212 0.381106 0.378264 0.362219 0.362219 0.378264 0.374075 0.359401 0.382878 0.393747 0.382458 0.371616 0.371616 0.382458 0.365822 0.355699 TP 0.359401 0.374075 0.370582 0.357079 0.355699 0.365822 0.351953 0.342581 SM 0.385953 0.402270 0.396279 0.381106 0.412995 0.422776 0.403508 0.393747 SN 0.381106 0.396279 0.392368 0.378264 0.393747 0.403508 0.390932 0.382458 TN T0 Typical CCT (K) Bin Code x y Typical CCT (K) S0 0.378264 0.392368 0.387071 0.374075 0.382458 0.390932 0.373899 0.365822 3950 0.374075 0.387071 0.382598 0.370582 0.402270 0.420940 0.414776 0.396279 0.365822 0.373899 0.359515 0.351953 0.422776 0.432618 0.416097 0.403508 RN 0.396279 0.414776 0.408593 0.392368 0.403508 0.416097 0.399525 0.390932 3650 3950 R0 0.392368 0.408593 0.402113 0.387071 0.390932 0.399525 0.382156 0.373899 3650 3950 RP 0.387071 0.402113 0.396564 0.382598 0.373899 0.382156 0.367284 0.359515 3650 4300 4300 SP 4300 RM 4300 3950 3650 Note for Table 11: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 25 5650K Cool White Bin Structure 0.41 4500K 5000K 0.39 UM 5650K 0.37 UN VM 6300K 0.35 WN XM XN 0.33 y 10000K Y0 V0 W0 X0 0.31 VN WM 7000K U0 blackbody locus UP VP WP WQ XP YA 0.29 0.27 0.25 0.25 0.27 0.29 0.31 x 0.33 0.35 0.37 0.39 Figure 22. 5650K Cool White bin structure. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 26 5650K Cool White LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 19 Color Bins, CCT Range 4,500K to 10,000K. Table 12. 5650K Cool White Bin Coordinates Bin Code x y Y0 0.274238 0.303051 0.307553 0.282968 0.300667 0.332708 0.310778 0.283772 YA 0.282968 0.307553 0.311163 0.289922 0.283772 0.310778 0.293192 0.270316 XM 0.301093 0.313617 0.314792 0.303051 XN Typical CCT (K) Bin Code x y Typical CCT (K) WQ 0.318606 0.329393 0.329544 0.319597 0.310201 0.320211 0.310495 0.301303 6000 8000 VM 0.328636 0.348147 0.346904 0.328823 0.368952 0.385629 0.371742 0.356917 5300 0.342244 0.354992 0.344438 0.332708 6700 VN 0.328823 0.346904 0.345781 0.329006 0.356917 0.371742 0.359190 0.345092 5300 0.303051 0.314792 0.316042 0.305170 0.332708 0.344438 0.333222 0.322386 6700 V0 0.329006 0.345781 0.344443 0.329220 0.345092 0.359190 0.344232 0.331331 5300 X0 0.305170 0.316042 0.317466 0.307553 0.322386 0.333222 0.320438 0.310778 6700 VP 0.329220 0.344443 0.343352 0.329393 0.331331 0.344232 0.332034 0.320211 5300 XP 0.307553 0.317466 0.319597 0.311163 0.310778 0.320438 0.301303 0.293192 6700 UM 0.348147 0.367294 0.364212 0.346904 0.385629 0.400290 0.382878 0.371742 4750 WM 0.313617 0.328636 0.328823 0.314792 0.354992 0.368952 0.356917 0.344438 6000 UN 0.346904 0.364212 0.362219 0.345781 0.371742 0.382878 0.371616 0.359190 4750 WN 0.314792 0.328823 0.329006 0.316042 0.344438 0.356917 0.345092 0.333222 U0 0.345781 0.362219 0.359401 0.344443 0.359190 0.371616 0.355699 0.344232 4750 W0 0.316042 0.329006 0.329220 0.317466 0.333222 0.345092 0.331331 0.320438 6000 UP 0.344443 0.359401 0.357079 0.343352 0.344232 0.355699 0.342581 0.332034 4750 WP 0.317466 0.329220 0.329393 0.318606 0.320438 0.331331 0.320211 0.310201 6000 8000 6000 Note for Table 12: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 27 LUXEON Rebel ES ANSI 1/4th Quadrant Color Bin Structure ANSI 1/4th quadrant color bin structure for LXW9-PW27, LXW9-PW30, LXW8-PW35, LXW8-PW40 and LXW8-PW50 emitters Figure 23. LUXEON Rebel ES ANSI 1/4th quadrant color bin structure. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 28 LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 32 Color Bins, CCT Range 2580K to 7040K Table 13. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates Nominal CCT Bin Code x y 8A 0.458614 0.446470 0.437300 0.448286 0.410315 0.407117 0.389300 0.391847 Bin Code x y 6A 0.408216 0.394131 0.388900 0.401706 0.392153 0.384815 0.369000 0.375155 2700K 8B 0.468732 0.456200 0.446470 0.458614 0.428946 0.426000 0.407117 0.410315 3500K 6B 0.414622 0.399600 0.394131 0.408216 0.408937 0.401500 0.384815 0.392153 2700K 8C 0.481300 0.468732 0.458614 0.469954 0.431900 0.428946 0.410315 0.412602 3500K 6C 0.429900 0.414622 0.408216 0.422071 0.416500 0.408937 0.392153 0.398417 2700K 8D 0.469954 0.458614 0.448286 0.459300 0.412602 0.410315 0.391847 0.394400 3500K 6D 0.422071 0.408216 0.401706 0.414700 0.398417 0.392153 0.375155 0.381400 3000K 7A 0.434392 0.422071 0.414700 0.425959 0.403186 0.398417 0.381400 0.385336 4000K 5A 0.381883 0.369655 0.367000 0.378297 0.377641 0.369740 0.357800 0.364637 3000K 7B 0.442994 0.429900 0.422071 0.434392 0.421230 0.416500 0.398417 0.403186 4000K 5B 0.386955 0.373600 0.369655 0.381883 0.395809 0.387400 0.369740 0.377641 3000K 7C 0.456200 0.442994 0.434392 0.446470 0.426000 0.421230 0.403186 0.407117 4000K 5C 0.400600 0.386955 0.381883 0.394131 0.404400 0.395809 0.377641 0.384815 7D 0.446470 0.434392 0.425959 0.437300 0.407117 0.403186 0.385336 0.389300 5D 0.394131 0.381883 0.378297 0.389800 0.384815 0.377641 0.364637 0.371600 3A 0.344719 0.336916 0.336600 0.343985 0.351301 0.344873 0.336900 0.342749 5000K 3B 0.346260 0.337600 0.336916 0.344719 0.368726 0.361600 0.344873 0.351301 5000K 3C 0.355100 0.346260 0.344719 0.352638 0.376000 0.368726 0.351301 0.357500 5000K 3D 0.352638 0.344719 0.343985 0.351500 0.357500 0.351301 0.342749 0.348700 2700K 3000K 5000K Nominal CCT 3500K 4000K Notes for Table 13: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. 2. Applicable for LXW9-PW27, LXW9-PW30, LXW8-PW35, LXW8-PW40 and LXW8-PW50 emitters. LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 29 LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure ANSI 1/4th quadrant bin structure for LXH7-PW40 emitter 0.41 0.40 4000K 5Y 0.39 blackbody locus y 5X 0.38 5Z 0.37 5W 0.36 3985K ±275K 0.35 0.35 0.36 0.37 0.38 x 0.39 0.40 0.41 0.42 Figure 24. LUXEON Rebel ES ANSI 1/4th quadrant bin structure (LXH7-PW40 emitter only). LUXEON Rebel ES emitters are tested and binned by x,y coordinates. 4 Color Bins, CCT Range 3710K to 4260K Table 14. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates for LXH7-PW40 emitter Nominal CCT Bin Code x y 4000K 5W 0.382750 0.370300 0.367000 0.378400 0.380300 0.372600 0.357800 0.364700 4000K 5X 0.382750 0.387100 0.373600 0.370300 0.380300 0.395900 0.387400 0.372600 5Y 0.382750 0.395200 0.400600 0.387100 0.380300 0.388000 0.404400 0.395900 5Z 0.382750 0.378400 0.389800 0.395200 0.380300 0.364700 0.371600 0.388000 4000K 4000K LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 30 Forward Voltage Bins Table 15 lists minimum and maximum Vf bin values per emitter (tested and binned at 700 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Table 15. Vf Bins Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) P 2.50 2.75 R 2.75 3.00 S 3.00 3.25 T 3.25 3.50 RoHS COMPLIANT LUXEON Rebel ES Datasheet DS61 20130221 ©2013 Philips Lumileds Lighting Company. 31 Company Information Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2013 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON Rebel ES Datasheet DS61 20130221