LUXEON 3535 2D Mid-Power LEDs Illumination Portfolio Introduction The LUXEON® 3535 Mid-Power 2D LED portfolio in this datasheet delivers optimized performance in combination with Quality of Light needed for distributed light source applications. In addition to delivering specified Correlated Color Temperature and Color Rendering combinations, these emitters deliver the efficacy and reliability required by the indoor and outdoor illumination markets. This document contains the performance data needed to design and engineer applications based on these LUXEON 3535 2D Mid-Power emitters. Features and Benefits Key Applications •High efficacy for sustainable design •Compact 3535 2D package •Minimum 80 CRI and R9 > 0 for quality indoor lighting •ANSI compliant 1/6th color binning •Downlight •Outdoor •Retrofit •Office •Architecture LUXEON 3535 2D Datasheet DS204 ©2013 Philips Lumileds Lighting Company. Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Relative Spectral Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Luminous Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. i General Information Product Nomenclature LUXEON Mid-Power Illumination emitters are tested and binned at 100 mA, with current pulse duration of 20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same. The part number designations for the MXCA series is explained as follows: MXCA-BCDE-IJKL Where: A — designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum) B — designates radiation pattern (value P = Lambertian) C — designates color (value W = White) D, E — designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K) I, J, K & L — additional part number designation Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme: M X C 8 - PW 4 0 - 0 0 0 0 Average Lumen Maintenance Characteristics Lumen maintenance for solid-state lighting devices (LEDs) is typically defined in terms of the percentage of initial light output remaining after a specified period of time. LUXEON Mid-Power LEDs are currently undergoing lumen maintenance testing. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely REACH and the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 2 Product Selection Product Selection for Mid-Power LEDs Solder Pad Temperature = 25°C, Test Current = 100 mA Table 1. Nominal CCT Part Number 2700K 3000K Color Rendering Index Minimum Luminous Flux (lm) Typical Luminous Flux (lm) ɸV ɸV Ra (Min) Ra (Typ) R9 (Typ) MXC8-PW27-0000 80 82 R9>0 55 65 MXC8-PW30-0000 80 82 R9>0 55 66 3500K MXC8-PW35-0000 80 82 R9>0 55 66 4000K MXC8-PW40-0000 80 82 R9>0 60 70 5000K MXC8-PW50-0000 80 82 R9>0 60 70 5700K MXC8-PW57-0000 80 82 R9>0 60 70 6500K MXC8-PW65-0000 80 82 R9>0 60 70 Note for Table 1: 1. Philips Lumileds maintains a tolerance of ± 7.5% on luminous flux and ± 2 on CRI measurements. Optical Characteristics Optical Characteristics of Mid-Power LEDs Solder Pad Temperature = 25°C, Test Current = 100 mA Table 2. Nominal CCT Color Temperature CCT Minimum Typical Maximum Typical Total Included Angle [1] (degrees) u0.90V Typical Viewing Angle [2] (degrees) 2u ½ 2700K 2550K 2700K 2850K 150 115 3000K 2850K 3000K 3200K 150 115 3500K 3200K 3500K 3750K 150 115 4000K 3750K 4000K 4250K 150 115 5000K 4700K 5000K 5300K 150 115 5700K 5300K 5700K 6000K 150 115 6500K 6000K 6500K 7000K 150 115 Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 3 Electrical Characteristics Electrical Characteristics of Mid-Power LEDs Thermal Pad Temperature = 25ºC, Test Current = 100 mA Table 3. Forward Voltage Vf [1] (V) Part Number Minimum Typical Maximum 5.6 6.1 6.8 MXC8-PW27-0000 MXC8-PW30-0000 MXC8-PW35-0000 MXC8-PW40-0000 MXC8-PW50-0000 MXC8-PW57-0000 MXC8-PW65-0000 Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Solder Pad (°C/W) Ru J-C -2.0 to -4.0 18 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.10V on forward voltage measurements. 2. Measured at Tj between 25°C and 110°C. Absolute Maximum Ratings Table 4. Parameter Maximum Performance DC Forward Current (mA) [1] 200 Peak Pulsed Forward Current (mA) 200 ESD Sensitivity Class 3A Human Body Model Class C Machine Model LED Junction Temperature [2] 125°C Operating Case Temperature at 100 mA -40°C - 105°C Storage Temperature -40°C - 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vr) [3], [4] -5V Notes for Table 4: 1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 200 mA, and the maximum of the current waveform is lower than 200 mA. 2. Proper current derating must be observed to maintain junction temperature below the maximum. 3. LUXEON Mid-Power LEDs are not designed to be driven in reverse bias. 4. At maximum reverse current of 10 µA. JEDEC Moisture Sensitivity Table 5. 2 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. + 5 / - 0 Hrs. [85°C / 60% RH LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 4 Reflow Soldering Characteristics 300 Tp: 260°C 260°C +0/-5°C 250 Ramp-Up Rate, 3°C/sec. max. 255°C +5/-0°C TL: 217°C Temperature ( C) 200 Tsmax : 200°C tp: 10-30sec. 30sec max. Tsmin: 150°C 150 ts : 60-120sec. tL: 60-150 sec,max 100 50 0 0 50 100 150 200 250 300 Time (seconds) Temperature profile for Table 6. Table 6. Reflow Profile in Accordance with J-Std-020D. Profile Feature Lead Free Assembly Preheat/Soak : Temperature Min (Tsmin ) Temperature Max (Tsmax ) Maximum Time (ts ) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp-up Rate (TL to Tp ) 3°C / second Liquidous Temperature (TL ) 217°C Maximum Time (tL ) Maintained above TL 150 seconds Maximum Peak Package Body Temperature (Tp ) 260°C Time (tp ) within 5°C of the specified temperature (Tc ) 10-30 seconds Maximum Ramp-Down Rate (Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Note for Table 6: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 5 Mechanical Dimensions 2.6 Cathode Anode 3.50±0.15 2.7 3.40±0.15 Part Mark Cathode 1.9 0.8 3.7 MAX 0.3 0.8 Figure 1. Package outline drawing. Notes for Figure 1: 1. All dimensions are in millimeters. 2. Tolerance: ±0.10mm. 3.Materials • Lead Frame: Copper Alloy with Silver Plating • Package Body: High Temperature Thermal Plastic • Encapsulant: Silicone Resin • Solder Lead Finish: Sn-Sn Plating LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 6 Solder Pad Design Figure 2. Solder pad layout. Notes for Figure 2: 1. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB). 2. Application Brief AB204 (to be released) provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com and www.philipslumileds.cn.com. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 7 Relative Spectral Distribution Relative Intensity vs. Wavelength, MXC8-PWxx Figure 3. Typical color spectrum of MXC8-PWxx emitter, integrated measurement at solder pad temperature = 25°C, forward current = 100 mA. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 8 Light Output Characteristics Relative Flux over Temperature MXCx-PWxx Figure 4. Typical relative light output vs. solder pad temperature, forward current = 100 mA. Relative Flux vs. Forward Current MXCx-PWxx Figure 5. Typical relative luminous flux vs. forward current, solder pad temperature = 25ºC. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 9 Luminous Efficacy Characteristics Relative Luminous Efficacy vs. Forward Current MXCx-PWxx Figure 6. Typical emitter efficacy versus forward current, solder pad temperature = 25°C. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 10 Forward Current Characteristics Forward Current vs. Forward Voltage MXCx-PWxx Figure 7. Typical forward current vs. forward voltage, solder pad temperature = 25°C. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 11 Typical Radiation Patterns Radiation Pattern in Cartesian Coordinate System Figure 8. Typical representative spatial radiation pattern. Radiation Pattern in Polar Coordinate System Figure 9. Typical polar plot of radiation pattern. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 12 Emitter Pocket Tape Packaging Ø1.50 2.0 ±0.05 4.0 ±0.1 2.2 ±0.1 1.75 ± 0.1 Anode Side 8.0 ±0.1 3.85 ± 0.1 5.5 ±0.1 12 +0.3/-0.1 Anode Mark Ø1.50 ±0.25/-0.0 0.29 ±0.02 3.75 ±0.1 Figure 10. Emitter pocket tape packaging. Notes for Figure 10: 1. All dimensions are in millimeters 2. Empty component pockets sealed with top cover tape 3. The maximum number of consecutive missing LEDs is two. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 13 Emitter Reel Packaging 18.4 max 2.0 +0.5/-0.0 180.0 ±0.5 62.5 +0/-2.5 Ø24.0 ±0.5 PART NO: LOT NO: MXM8-PW40-5601 Ø13.0 ±0.2 090430-0136959718 QUANTITY: 1998 CAT CODE: L56X DATE CODE: 1205 12.4 +2/-0 Figure 11. Emitter reel packaging. Notes for Figure 11: 1. All dimentions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. 7 inch reel-1000 pieces per reel. 4. Minimum packing quantity is 500 pieces. 5. The maximum number of consecutive missing LEDs is two. 6. In accordance with EIA-481-1-B specification. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 14 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). Decoding Product Bin Labeling LUXEON Mid-Power emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K and 6500K emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A= Flux bin (D, etc.) B and C = Color bin (For example 51, 52, 53, 54, 55, 56) D= Vf bin Luminous Flux Bins Table 7 lists the standard photometric luminous flux bins for LUXEON Mid-Power emitters (tested and binned at 100 mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) A 55 60 B 60 65 C 65 70 D 70 75 E 75 80 Tested and binned at 25°C, If=100 mA. Tester tolerance: ±7.5%. LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 15 Forward Voltage Bins Table 8. Vf Bins Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) F 5.6 5.8 G 5.8 6 H 6 6.2 J 6.2 6.4 K 6.4 6.6 L 6.6 6.8 Tested and binned at 25°C, If = 100 mA. Tester tolerance: ±0.10V LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 16 Color Bin Structure MXCx-PW27-xxxx Color Bin Structure 0.450 0.440 0.430 81 0.420 83 85 y 2700K 0.410 0.400 82 84 86 2580 0.390 2870K 0.380 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x Figure 12. ANSI 2700K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 9. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW27-xxxx Emitter Bin Code x y Bin Code x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4132 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 Notes for Table 9: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 17 Color Bin Structure, Continued MXCx-PW30-xxxxx Color Bin Structure 0.445 0.435 0.425 71 0.415 73 75 y 0.405 0.395 3000K 72 74 76 2870K 0.385 3200K 0.375 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 x 0.440 0.445 0.450 0.455 0.460 0.465 Figure 13. ANSI 3000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 10. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW30-xxxx Emitter Bin Code x y Bin Code x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 Notes for Table 10: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 18 Color Bin Structure, Continued MXCx-PW35-xxxxx Color Bin Structure 0.430 0 420 0.420 0.410 61 63 0.400 y 65 0.390 3500K 62 64 0.380 3250K 66 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 14. ANSI 3500K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 11. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW35-xxxx Emitter Bin Code x y Bin Code x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 Notes for Table 11: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 19 Color Bin Structure, Continued MXCx-PW40-xxxx Color Bin Structure 0.420 0.410 0.400 51 0.390 53 y 55 0.380 4000K 52 54 0.370 3750K 56 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 15. ANSI 4000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 12. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW40-xxxxx Emitter Bin Code x y Bin Code x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 Notes for Table 12: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 20 Color Bin Structure, Continued MXCx-PW50-xxxx Color Bin Structure 0.390 0 380 0.380 0.370 31 33 0.360 35 y 5000K 32 0.350 34 4750K 36 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 16. ANSI 5000K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 13. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW50-xxxx Emitter Bin Code x y Bin Code x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 Notes for Table 13: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 21 Color Bin Structure, Continued MXCx-PW57-xxxxx Color Bin Structure 0.370 0.360 21 0.350 23 25 y 0.340 5700K 22 24 5250K 26 0.330 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 x 0.335 0.340 0.345 0.350 Figure 17. ANSI 5700K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 14. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW57-xxxxx Emitter Bin Code x y Bin Code x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 Notes for Table 14: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 22 Color Bin Structure, Continued MXCx-PW65-xxxxx Color Bin Structure 0.365 0 355 0.355 0.345 11 0.335 13 y 15 6500K 0.325 12 6000K 14 16 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 18. ANSI 6500K 1/6th color bin structure. LUXEON Mid-Power Emitters are tested and binned by x,y coordinates. Table 15. LUXEON Mid-Power ANSI 1/6 Color Bin Coordinates for MXCx-PW65-xxxxx Emitter Bin Code x y Bin Code x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 Notes for Table 15: 1. Tested and binned at 25°C and If = 100 mA. Tester tolerance: +/- 0.01 in x and y coordinates LUXEON 3535 2D Datasheet DS204 20130530 ©2013 Philips Lumileds Lighting Company. 23 Company Information Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2013 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON 3535 2D Datasheet DS204 20130530