GS36U 22.5~36W AC-DC Single Output Wall-mounted type ¡¡E¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E series Features : Universal AC input / Full range No load power consumption<0.3W ErP step2 compliant NRCan compliant Meet EISA 2007 (Energy Independence and Security Act) 2 pole USA plug Class power (without earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Approvals: UL / CUL / BSMI / CB / FCC Pass LPS 2 years warranty ¢º SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS36U05-P1J GS36U09-P1J GS36U12-P1J GS36U24-P1J GS36U48-P1J GS36U05 GS36U09 GS36U12 GS36U24 GS36U48 9V 12V 24V 48V Note.2 5V RATED CURRENT 4.5A 3.5A 3A 1.5A 0.75A CURRENT RANGE 0 ~ 4.5A 0 ~ 3.5A 0 ~ 3A 0 ~ 1.5A 0 ~ 0.75A RATED POWER (max.) 22.5W 31.5W 36W 36W 36W 90mVp-p 100mVp-p 180mVp-p ¡Ó2.0% Ó¡ 1.0% ¡Ó2.0% 240mVp-p 85.5% 87.5% RIPPLE & NOISE (max.) Note.3 90mVp-p VOLTAGE TOLERANCE Note.4 LINE REGULATION Note.5 LOAD REGULATION Note.6 ¡Ó5.0% Ó¡ 1.0% ¡Ó5.0% ¡Ó5.0% Ó¡ 1.0% ¡Ó5.0% SETUP, RISE, HOLD UP TIME 1000ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT 76.5% AC CURRENT INRUSH CURRENT (max.) 0.7A / 100VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 7) EMC EMISSION OTHERS CONNECTOR NOTE 1000ms, 20ms, 15ms/115VAC at full load 81.5% 84.5% 35A / 115VAC 0.25mA / 240VAC 110 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode -20 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH ¢J ¢ J ¡Ó0.03% / ¢J (0 ~ 50¢J) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, BSMI CNS14336 approved I/P-O/P:4242VDC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ¢J Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B PACKING PLUG 692.3Khrs min. MIL-HDBK-217F(25 79*54*33mm (L*W*H) 226g ; 60pcs / 15.5kg / CARTON See page2 CABLE See page2 MTBF DIMENSION ¡Ó2.0% Ó¡ 1.0% ¡Ó2.0% 47 ~ 63Hz EFFICIENCY (Typ.) LEAKAGE CURRENT(max.) ¡Ó3.0% Ó¡ 1.0% ¡Ó3.0% ¢J) ¢J 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS36U-SPEC 2013-02-23 GS36U 22.5~36W AC-DC Single Output Wall-mounted type Mechanical Specification series Unit:mm ¡Ó 17 UL1185 16AWG 1000 50mm ¡Ó ¡Ó 60 10mm 70 10mm C"+" ¡Ó 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 33 79 P1J OUTPUT + 54 P/N CENTER Derating Curve Static Characteristics for 12~48V 100 70 -20 LOAD (%) LOAD (%) 100 for 5~9V 10 20 30 Ta ( 40 ¢J) 50 80 60 0 50 60 70 80 90 100 264 INPUT VOLTAGE File Name:GS36U-SPEC 2013-02-23