Europe: +49 / 7733 9487 0 | Email: [email protected] USA: +1 / 508 539 0002 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 8848285100 Item: BE48-2A85-P preliminary datasheet Coil datas at 20 °C Conditions Min Setpoint Max Unit Conditions Min Setpoint Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 85 Contact-No. Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (40-50 AT) Operate time incl. bounce Release time Capacity special product data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Sealing compound Environmental data Ambient temperature Storage temperature Soldering temperature Washability 85 A not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ Start Value ' ! & (! Start Value % & "#" & " ' RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz ) *+ Conditions Min Setpoint Max RH <45%, 500 V test voltage according to IEC 255-5 Unit ) , Polycarbonat Polyurethan Conditions Min Setpoint / / Max . max. 5 sec Unit - fully sealed Modifications in the sense of technical progress are reserved Designed at: 13.02.06 Designed by: WKOVACS Approval at: Last Change at: 13.02.06 Last Change by: WKOVACS Approval at: 13.02.06 Approval by: Approval by: RUDI RIPPL Version: 01