Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Coil Data at 20 °C Item No.: 1324231021 Item: DIL24-2A31-21L Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 31 Contact-form Contact-material Switching suitability Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release Time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Sealing compound number of contacts Environmental data Ambient temperature Storage temperature Soldering temperature Cleaning A Hg bounce free independent on position up to 500V max. 50W, with 1000V max. 5W DC or Peak AC DC or Peak AC DC or Peak AC !"# $ % Start Value ( " ' )" Start Value & ' #$# ' ! # ( RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch * ! ! +, Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 Typ Max PBT glass fibre reinforced Polyurethan Conditions Min Typ / / wave soldering max. 5 sec fully sealed Max Unit * - Unit . . . Modifications in the sense of technical progress are reserved Designed at: 26.06.06 Designed by: WKOVACS Approval at: Last Change at: 26.06.06 Last Change by: WKOVACS Approval at: 17.07.08 Approval by: RUDI RIPPL Approval by: RRIPPL Version: 01