Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2118019367 Item: KSK-1A80-BV19367 Conditions Magnetic properties Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release Capacity Contact dimensions Min Typ C Max Unit 80/1 A Iridium Any DC combination of V & A DC or Peak AC DC or Peak AC DC or Peak AC Measured with 40% overdrive Maximum value 1,5 ms after excitation RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch Glass body length Unit KMS-01 Conditions Contact data 80/1 Max Conditions " Min ! Typ Max Unit Typ Max Unit Tolerance according to drawing Modified dimensions Conditions Min Remarks to dimensions see drawing Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Unit # # $ $ $ %" % wave soldering max. 5 sec Max Modifications in the sense of technical progress are reserved Designed at: Last Change at: 16.12.08 Designed by: Last Change by: AKELLER Approval at: Approval at: 16.12.08 Approval by: Approval by: RKAMP Version: 01