MEDER SIL12-1B90-71D

Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
3312190171
Item:
SIL12-1B90-71D
Conditions
Coil Data at 20 °C
Coil resistance
Coil voltage
Rated power
Coil current
Thermal resistance
Inductance
Pull-In voltage
Drop-Out voltage
=
Contact rating
Switching voltage
Switching current
Carry current
Contact resistance static
Insulation resistance
Breakdown voltage
Operate time, incl. bounce
Release time
Capacity
Special Product Data
Number of contacts
Contact - form
Dielectric Strength Coil/Contact
Insulation resistance Coil/Contact
Capacity Coil/Contact
Case colour
Housing material
Connection pins
Magnetic Shield
Reach / RoHS conformity
Approval
Approval
Remark
Typ
Max
Unit
Min
Typ
Max
Unit
operating temperature + self heating
Conditions
Contact data 90
Min
! "# #! !$ %
not to exceed their individual max.'s
DC or Peak AC/ with 40% overdrive
DC or Peak AC/with 40% overdrive
DC or Peak AC/ with 40% overdrive
( ) * +#
Start Value
&'
'
, !- * #-
'
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
'
.
/
'
&
'
Conditions
Min
Typ
)
)
0
Max
Unit
1
B - NC
according to IEC 255-5
RH <45%, 200 VDC test voltage
@ 10 kHz
'
/
.
0
black
epoxy resin
CuFe2P tin plated
no
yes
UL File No. NRNT2.E156887
UL File No. NRNT8.E156887
attention polarity diode!
Modifications in the sense of technical progress are reserved
Designed at:
08.08.06
Designed by:
KMUELLER
Approval at:
31.10.08
Approval by:
KOLBRICH
Last Change at:
23.04.10
Last Change by:
WKOVACS
Approval at:
23.04.10
Approval by:
KOLBRICH
Version:
03
Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
3312190171
Item:
SIL12-1B90-71D
Environmental data
Shock
Vibration
Operating temperature
Storage temperature
Soldering temperature
Washability
Conditions
Min
Max
'
3
34'
wave soldering max. 5 sec.
&
'
5
Unit
1
1
2
2
2
fully sealed
Conditions
General data
Typ
1/2 sine wave duration 11ms
from 10 - 2000 Hz
Min
Total weigth
Packaging
Typ
Max
'
Tube per 25 piece
Unit
1
Modifications in the sense of technical progress are reserved
Designed at:
08.08.06
Designed by:
KMUELLER
Approval at:
31.10.08
Approval by:
KOLBRICH
Last Change at:
23.04.10
Last Change by:
WKOVACS
Approval at:
23.04.10
Approval by:
KOLBRICH
Version:
03