Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3212190251 Item: DIP12-1C90-51M Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 90 Min !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive ( ) * +$ Start Value ' , "- * $- RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch . / ' Conditions Min Typ ) ) 0 Max Unit 1 Form C - Changeover according to IEC 255-5 40°C, 95% R.H. @ 10 kHz / . 0 black epoxy resin Copper alloy tin plated yes yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 07.01.09 Designed by: THAUKE Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 27.08.09 Last Change by: KSCHIELENSKI Approval at: 27.08.09 Approval by: KOLBRICH Version: 2 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3212190251 Item: DIP12-1C90-51M Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 3 3 wave soldering max. 5 sec. Max ' 4 5 Unit 1 1 2 2 2 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 1 Modifications in the sense of technical progress are reserved Designed at: 07.01.09 Designed by: THAUKE Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 27.08.09 Last Change by: KSCHIELENSKI Approval at: 27.08.09 Approval by: KOLBRICH Version: 2