MSLU400 SERIES DC/DC CONVERTER 2W, SMD-Package FEATURES ►SMD Package with Industry Standard Pinout ►Small Footprint: 12.3 x 13.7 mm (0.48”x 0.54”) Single Output Models 12.3 x 16.3 mm (0.48”x 0.64”) Dual Output Models ►I/O-Isolation 1500 VDC ►Single and Dual Output Models ►Operating Temp. Range –40°C to +85°C ►Overload Protection ►High Accuracy of Pin Planarity ►Qualified for lead-free reflow solder process according IPC/JEDEC J-STD-020D ►Tape & Reel Package available ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX MSLU400 series is a range of 2W DC/DC converters in a SMD- Package featuring I/O-isolation of 1500VDC.The very small footprint makes this product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination,in digital interfaces or where a converted voltage is required. An excellent efficiency allows an operating temperature range of–40°C to +85°C. With a new package design these converters are fully qualified for the higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can be supplied in tape& reel package. Model Selection Guide Model Input Output Number Voltage Voltage (Range) VDC MSLU401 MSLU402 MSLU404 MSLU406 MSLU408 MSLU409 MSLU411 MSLU412 MSLU414 MSLU418 MSLU419 MSLU421 MSLU422 MSLU424 MSLU428 MSLU429 5 (4.5 ~ 5.5) 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) VDC 3.3 5 12 ±5 ±12 ±15 3.3 5 12 ±12 ±15 3.3 5 12 ±12 ±15 Output Current Input Current Max. Min. @Max. Load mA 500 400 165 ±200 ±83 ±66 500 400 165 ±83 ±66 500 400 165 ±83 ±66 mA 10 8 3 ±4 ±1.5 ±1 10 8 3 ±1.5 ±1 10 8 3 ±1.5 ±1 mA(typ.) 471 548 514 541 524 521 191 222 209 208 206 96 111 105 105 104 @No Load mA(typ.) 60 30 15 Load Max. capacitive Efficiency Regulation Load (typ.) @Max. Load % (max.) 11 11 11 10 7 7 8 8 5 5 5 8 8 5 5 5 uF 47 47 10 10# 4.7# 4.7# 47 47 10 4.7# 4.7# 47 47 10 4.7# 4.7# # For each output % 70 73 77 74 76 76 72 75 79 80 80 72 75 79 79 79 Input Specifications Parameter Model 5V Input Models 12V Input Models 24V Input Models 5V Input Models 12V Input Models 24V Input Models Input Voltage Range Input Surge Voltage (1 sec. max.) Reverse Polarity Input Current Input Filter Internal Power Dissipation All Models --- E-mail:[email protected] 2011/12/15 REV:8 Min. 4.5 10.8 21.6 -0.7 -0.7 -0.7 --- Tel:886-6-2923150 Page 1 of 4 Typ. Max. 5 5.5 12 13.2 24 26.4 --9 --18 --30 --0.3 Internal Capacitor --650 Unit VDC A mW MSLU400 SERIES DC/DC CONVERTER 2W, SMD-Package Output Specifications Parameter Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Ripple & Noise (20MHz) Ripple & Noise (20MHz) Temperature Coefficient Short Circuit Protection Conditions Dual Output, Balanced Loads For Vin Change of 1% Io=20% to 100% Min. ----- Typ. Max. ±0.1 ±1.0 ±1.2 ±1.5 See Model Selection Guide 100 120 --200 --15 ±0.01 ±0.02 0.5 Second Max. --------- Over Line, Load & Temp. Unit % % mV P-P mV P-P mV rms %/℃ General Specifications Parameter Conditions Min. Typ. Max. Unit 60 Seconds 1500 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- MΩ I/O Isolation Capacitance 100KHz, 1V --- 60 100 pF 50 100 120 KHz 2,000,000 --- --- Hours I/O Isolation Voltage (rated) Switching Frequency MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D Level 2 Input Fuse 5V Input Models 1000mA Slow-Blow Type 12V Input Models 500mA Slow-Blow Type 24V Input Models 200mA Slow-Blow Type Environmental Specifications Parameter Operating Temperature Range (with Derating) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. -40 ---50 --Free-Air convection --- Max. +85 +90 +125 95 Unit ℃ ℃ ℃ % rel. H 300 ℃ Power Derating Curve 100 Natural Convection 20LFM 80 100LFM 60 200LFM 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature ] Notes 1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0-20MHz. 3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these 4 All DC/DC converters should be externally fused at the front end for protection. modules; however they may not meet all specifications listed. 5 Other input and output voltage may be available, please contact factory. 6 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 7 Specifications subject to change without notice. 8 It is not recommended to use water-washing process on SMT units. E-mail:[email protected] 2011/12/15 REV:8 Tel:886-6-2923150 Page 2 of 4 MSLU400 SERIES DC/DC CONVERTER 2W, SMD-Package Package Specifications Mechanical Dimensions (Single Ouput) Connecting Pin Patterns 2.54 [0.1] 1.8 [0.07] 11.9 [0.47] 5 4 0~ 4 R 0. 2 9.3 [0.37] 1 12.3 [0.48] 5 8 7.62 [0.30] 0.25 [0.01] 3.04 [0.12] ( Magnification of A ) 5.08 [0.2] 13.7 [0.54] 0.60 [0.02] 8.9 0.5 [0.35 0.02] 1.0 [0.04] S SEATING PLANE 1.5 0.1 [0.06 0.004] 0.3 [0.01] 8.6 [0.34] 2.54 [0.10] 6.15 [0.24] 6.15 [0.24] 1.5 0.1 [0.06 0.004] 0.1 S Package Specifications Mechanical Dimensions (Dual Output) Connecting Pin Patterns 5 2.54 [0.1] 5.08 [0.2] 16.3 [0.64] 0.25 [0.01] 7.62 [0.30] 1.8 [0.07] 11.9 [0.47] 0~ 4 4 0. 5 2 R 1 12.3 [0.48] 7 10 9.3 [0.37] 3.07 [0.12] ( Magnification of A ) 2.54 [0.1] 0.60 [0.02] 8.9 0.5 [0.35 0.02] 1.0 [0.04] S SEATING PLANE 1.5 0.1 [0.06 0.004] 0.3 [0.01] 8.6 [0.34] 2.54 [0.10] 6.15 [0.24] 6.15 [0.24] 1.5 0.1 [0.06 0.004] 0.1 S ►All dimensions in mm (inches) ►Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) ► Pins ±0.05(±0.002) Pin Connections Physical Characteristics Pin Single Output Dual Output Case Size (Single Output) : 13.7x9.3x8.6mm (0.54x0.37x0.34 Inches) 1 -Vin -Vin Case Size (Dual Output) : 16.3x9.3x8.6mm (0.64x0.37x0.34 Inches) 2 +Vin +Vin 4 -Vout Common Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) 5 +Vout -Vout 7 No Pin +Vout Weight (Single Output) : 1.5g 8 NA No Pin Weight (Dual Output) : 2.2g 10 No Pin NA NA : Not Available for Electrical Connection E-mail:[email protected] 2011/12/15 REV:8 Tel:886-6-2923150 Page 3 of 4 MSLU400 SERIES DC/DC CONVERTER 2W, SMD-Package Test Configurations Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33uF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC/DC Converter. +Vin +Out Copper Strip Single Output DC / DC Converter -Vin Cout -Out Scope Resistive Load Copper Strip +Vin +Out Copper Strip Dual Output DC / DC Converter Com. Copper Strip -Vin -Out Scope Cout Resistive Load Cout Scope Copper Strip Design & Feature Considerations Maximum Capacitive Load The MSLU400 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is comended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 2.2uF for the 5V input devices, a 1.0uF for the 12V input devices and a 0.47uF for the 24V devices. + DC Power Source +Vin + +Out DC / DC Converter Load Cin - -Vin -Out Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 1.5uF capacitors at the output. + +Vin DC Power Source - +Out Single Output DC / DC Converter -Vin + Cout Load -Out +Vin DC Power Source - +Out Dual Output DC / DC Com. Converter -Vin -Out Cout Load Load Cout Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from measurements obtained in a test setup. Position of air velocity probe and thermocouple 15mm / 0.6in 50mm / 2in Air Flow DUT 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2011/12/15 REV:8 Page 4 of 4