MTJH, MTJS, & MTJZ SERIES TCXO 11.7 X 9.6 SMD Package Voltage Control Option Wide Frequency Range RoHS Compliant Available HCMOS Output Frequency Range Load Supply Current Clipped Sinewave Sinewave 9.600MHZ to 50.000MHZ 10k Ohms // 15pF 10k Ohms // 15pF 50 Ohms 35mA max 3mA max 25mA max Logic “1” = 90% of Vdd min 1.0V p-p min 7 dBm Logic “0” = 10% of Vdd max See Part Numbering Guide N/A N/A (See Frequency Stability vs Temperature Table) ±1 ppm per year max ±0.3 ppm with a 5% change in Vdd ±0.3 ppm with a 10% change in Load (See Frequency Stability vs Temperature Table) -40°C to +85°C +3.3VDC ±5% +5.0VDC ±5% +1.65VDC ±1.50VDC Positive Slope +2.50VDC ±2.00VDC Positive Slope Output Level Symmetry Freq. Stability vs Temp (Note 1) Freq. Stability vs Aging Freq. Stability vs Voltage Freq. Stability vs Load Operating Range Storage Temperature Supply Voltage (Vdd) Control Voltage with VC option Pin 1 Connection No Connection VC Option No Connection ±10 ppm min Note 1: Oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment. Phase Noise Marking Detail Line 1 = MXXXXX M XXXXX Line 2 = SYYWWL S YYWW L = MMD = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) Envir & Mech Detail Shock MIL-STD-883, Method 2002, Condition B Solderability MIL-STD-883, Method 2003 Vibration MIL-STD-883, Method 2007, Condition A = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MTCH011311L Pg 1 of 2 Part Number Guide MT Frequency J 9.6 x 11.7 SMD Packaging Blank = Bulk T = Tape and Reel Series Option J = J series (w/o trimmer) Output H = HCMOS S = Clipped Sinewave Z = Sinewave Supply Voltage 5 = +5 VDC 3 = +3.3 VDC 2 = +2.5 VDC RoHS Compliant Blank = Not Compliant F = is Compliant Height Option A = 3.00 [.118] max B = 5.00 [.197] max Frequency Stability = ±1.0 ppm = ±1.5 ppm = ±2.0 ppm = ±2.5 ppm = ±3.0 ppm = ±5.0 ppm Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C 10 15 20 25 30 50 Pin 1 Connection Blank = No Connect V = Voltage Control Symmetry Blank = 40/60% A = 45/55% Please Consult with MMD Sales Department for any other Parameters or Options Frequency Stability vs Temperature Table Stability 10 Temp ±1.0ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -40°C TO +85°C ● = Available Code A G C D F 15 ±1.5ppm ● ● 20 ±2.0ppm ● ● ● 25 30 50 ±2.5ppm ±3.0ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer Tape & Reel Dimensions Mechanical Details A = 3.00 [.118] MAX B = 5.00 [.197] MAX 9.61 [.378] MAX 7.00 [.276] MXXXXX SYYWWL XXXXX PITCH Tape Width 7 8 11.70 [0.461] MAX 7.62 [.300] 1 14 1.20 [.047] TRIMMER ACCESS Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA PIN 1 ORIENT. REEL DIA 12.00 [.471] 24.00 [.945] 330 [13.0] Q1 1.40 [.055] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED DIRECTION OF FEED 8.26 [.325] NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. PIN CONNECTIONS 7.62 [.300] PIN 1 VOLTAGE CONTROL OR NO CONNECTION PIN 7 PIN 8 PIN 14 CASE GROUND OUTPUT SUPPLY VOLTAGE 2.54 [.100] 2.54 [.100] MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval MTCH011311L Pg 2 of 2