MTDS Series – 5 X 7 Ceramic SMD TCXO Low Profile SMD TCXO Clipped Sinewave Output RoHS Compliant Low Power Consumption Frequency Range 10.000MHZ to 27.000MHZ Frequency Stability vs Temperature * (See Frequency Stability vs Temperature Table) Operating Temperature Range (See Frequency Stability vs Temperature Table) -40°C to +85°C Storage Temperature Range Output Type Clipped Sinewave Supply Voltage +3.30 VDC ±5% +5.00 VDC ±5% Supply Current Output Level 2.0mA max +1.65 VDC ±1.50 VDC Positive Slope 0.8 Vp-p min 2.0mA max +2.50 VDC ±2.00 VDC Positive Slope 1.0 Vp-p min Output Load 10 kΩ // 10pF 10 kΩ // 10pF Control Voltage Pin 1 No Connection (Option) No Connection Vc Option Frequency Pull Range ±10 ppm min Vc Linearity 10% max *Inclusive of Temperature., Load, Voltage and Aging Environmental & Mechanical Detail Marking Detail Line 1 = MXXXXX Shock MIL-STD-883, Method 2002, Condition B M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) Denotes RoHS Compliant Line 2 = SYYWWL S Solderability MIL-STD-883, Method 2003 YYWW L Vibration MIL-STD-883, Method 2007, Condition A = Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 07/29/11 H Pg 1 of 2 Part Number Guide MTD Frequency S 5 x 7 SMD TCXO Frequency Stability 10 = ± 1.0 ppm 15 = ± 1.5 ppm 20 = ± 2.0 ppm 25 = ± 2.5 ppm 30 = ± 3.0 ppm 35 = ± 3.5 ppm 50 = ± 5.0 ppm 100 = ±10.0 ppm Supply Voltage 3 = +3.3 VDC 5 = +5.0 VDC Output S = Clipped Sinewave Operating Temperature A = 0°C to +50°C B = -10°C to +60°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Packaging Pin 1 Connection Blank = No Connect V = Voltage Control Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options Frequency Stability vs Temperature Table Stability 10 ±1.0 Temp 0°C TO +50°C ● 0°C TO +70°C ● -10°C TO +50°C ● -20°C TO +70°C ● -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available Code A G B C D E F 15 ±1.5ppm ● ● ● ● 20 ±2.0ppm ● ● ● ● ● ● ● 25 30 35 50 ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer Tape & Reel Dimensions 4. 00 2.00 PITCH + 0.10 Ø 1. 50-0.00 7.20±.20 [.283±0.008] MAX 0. 60 MAX 1. 75 Mechanical Details COVER TAPE 2.00 [.079] MAX 5.08±.10 [.200±0.004] 1 7.50 TAPE 5.20±.20 [.205±0.008] MAX MXXXXX SYYWWL XXXXX B0 1.00 [.039] 7 3.00 [.118] 3 K0 DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED A0 A0 PIN 1 O RIENTATIO N 5.4 BO K0 7.4 2.0 PITCH TAPE 8.0 16.0 330 [13 IN ] REEL 1.50 [.059] 1.20 [.047] 3.00 [.118] DIRECTIO N OF FEED 4 6 1.40 [.055] 0.75 [.030] Ø 1. 50 MIN 2 5 8 NO TES: U NL ESS OTH ERWISE SPECIF IED 1. Appli ca bl e Sta ndards / Spe cif ic ations ANSI Y14. 5M, D imensions and Tole ra nc es EIA-481-B, 8 mm through 200mm Embosse d Ca rrier Taping and 8 mm and 12 mm Punc hed Carrie r Ta ping of Surfa ce Mount Components for Automa tic Ha ndling. 2. Dim ensi ons a re in m illim ete rs . 3. Tol era nce s a re ± 0.1 mm unl es s otherw ise spec if ie d. 4. Do not s ca le draw ing. PIN 1 VC OR N/C PIN 2 GROUND PIN 3 OUTPUT PIN 4 SUPPLY VOLTAGE PIN 5-8 FACTORY TEST TERMINALS (DO NOT USE) 3.58 [.141] SUGGESTED LAND PATTERN MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 07/29/11 H Pg 2 of 2