LMR-400-UF TIMES MICROWAVE SYSTEMS LMR- 400-UF UltraFlex Communications Coax ® Ideal for… •Drop-in replacement for RG-8/9913 Air-Dielectric type Cable •Jumper Assemblies in Wireless Communications Systems •Short Antenna Feeder runs •Any application that requires periodic/repeated flexing • Connectors: A wide variety of connectors are available for LMR-400-UF cable, including all common interface types, reverse polarity, and solder-on center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes. • Flexibility and bendability are hallmarks of the LMR- • Cable Assemblies: All LMR-400-UF cable types are 400-UF cable design. The flexible outer conductor available as pre-terminated cable assemblies. Refer to enables the tightest bend radius available for any cable of the section on FlexTech for further details. similar size and performance. • Low Loss is another hallmark feature of LMR-400- Part Description UF. Size for size LMR has the lowest loss of any flexible Stock Application Jacket Color Code cable and comparable loss to semirigid hard-line cables. Part Number • RF Shielding is 50 dB greater than typical single LMR-400-UF Indoor/Outdoor TPE Black 54040 shielded coax (40 dB). The multi-ply bonded foil outer conductor is rated conservatively at > 90 dB (i.e. >180 Construction Specifications dB between two adjacent cables). Description Material In. (mm) • Weatherability: LMR-400-UF cables are designed Inner Conductor Stranded BC 0.108 (2.74) Foam Polyethylene 0.285 (7.24) for outdoor exposure and have a life expectancy in excess Dielectric Outer Conductor Aluminum Tape 0.291 (7.39) of 10 years. • LMR - UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/ flexing cycles. It is used for both indoor and outdoor applications. ® Overall Braid Jacket 62 Tinned Copper 0.320 (8.13) Black Thermoplastic Elastomer 0.405 (10.29) (800) TMS-COAX • www.timesmicrowave.com Mechanical Specifications Performance Property Units Bend Radius: installation in. (mm) Bend Radius: repeated in. (mm) Bending Moment ft-lb (N-m) Weight lb/ft (kg/m) Tensile Strength lb (kg) Flat Plate Crush lb/in. (kg/mm) US (metric) 1.0 4.0 0.375 .088 160 20 (25.4) (101.6) (0.51) (0.131) (72.6) (0.36) Performance Property F Installation Temperature Range -40/+185 Storage Temperature Range -94/+185 Operating Temperature Range -40/+185 0 Units US (metric) Velocity of Propagation % 85 Dielectric Constant NA 1.38 Time Delay nS/ft (nS/m) 1.20 (3.92) Impedance ohms 50 Capacitance pF/ft (pF/m) 23.9 (78.40) Inductance uH/ft (uH/m) 0.060 (0.21) Shielding Effectiveness dB >90 DC Resistance Inner Conductor ohms/1000ft (/km) 1.07 (3.51) Outer Conductor ohms/1000ft (/km) 1.65 (5.4) Voltage Withstand Volts DC 2500 Jacket Spark Volts RMS 8000 Peak Power kW 16 Environmental Specifications Electrical Specifications Performance Property C -40/+85 -70/+85 -40/+85 o Attenuation vs. Frequency (typical) 100.0 Attenuation (db per 100 feet) 10.0 1.0 0.1 10 Frequency (MHz) Attenuation dB/100 ft Attenuation dB/100 m Avg. Power kW 100 Frequency (MHz) 1,000 10,000 30 50 150 220 450 900 1500 1800 2000 2500 5800 0.8 2.7 2.77 1.1 3.5 2.14 1.8 6.1 1.22 2.2 7.4 1.00 3.3 10.7 0.69 4.7 15.4 0.48 6.2 20.2 0.36 6.8 22.3 0.33 7.2 23.6 0.31 8.1 26.6 0.28 13.0 42.6 0.17 Calculate Attenuation = (0.146748) • FMHz + (0.000312) • FMHz (interactive calculator available at http://www.timesmicrowave.com/cable_calculators) Attenuation: VSWR=1.0; Ambient = +25°C (77°F) Power: VSWR=1.0; Ambient = +40°C; Inner Conductor = 100°C (212°F); Sea Level; dry air; atmospheric pressure; no solar loading (800) TMS-COAX • www.timesmicrowave.com 63 LMR-400-UF TIMES MICROWAVE SYSTEMS LMR-400-UF TIMES MICROWAVE SYSTEMS LMR -400-UF UltraFlex Communications Coax ® TC-400-716-FC TC-400-BM TC-400-716-MC SC-400NM TC-400NM TC-400-NFC TC-400-MUHF TC-400-NMC TC-400-NMH-D TC-400-NMH-RA-D TC-400-SM TC-400-NMH-RA TC-400-TM TC-400-TMH-RA TC-400-TM-RA Connectors Inner Outer Finish* Part StockVSWR** Coupling Contact Contact BodyLengthWidthWeight Interface Description Number Code Freq.(GHz) Nut Attach Attach /Pin in(mm) in(mm) lb (g) 7-16 DIN Female Straight Jack TC-400-716-FC 3190-376 <1.25:1 (2.5) NA Solder Clamp S/S 1.6 (41) 1.13(28.7) 0.281(127.5) 7-16 DIN Male Straight Plug TC-400-716-MC 3190-279 <1.25:1 (2.5) Hex Solder Clamp S/S 1.4 (36) 1.40(35.6) 0.268 BNC Male Straight Plug TC-400-BM 3190-318 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.56(14.2) 0.063(28.6) Mini-UHF Straight Plug TC-400-MUHF 3190-520 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.1 (28) 0.50(12.7) 0.020 (9.1) N Female Straight Jack TC-400-NFC 3190-299 <1.25:1 (2.5) NA Solder Clamp N/S 1.6 (41) 0.75(19.1) 0.119(54.0) N Male Straight Plug SC-400-NM Knurl Solder Crimp N/G 1.5 (38) 0.75(19.1) 0.090(40.8) 3190-1454 <1.25:1 (2.5) (121.6) Straight Plug TC-400-NM 3190-188 <1.25:1 (2.5) Knurl Solder Crimp N/G 1.5 (38) 0.75(19.1) 0.090(40.8) Straight Plug TC-400-NMC 3190-277 <1.25:1 (2.5) Knurl Solder Clamp N/G 1.5 (38) 0.75(19.1) 0.121(54.9) Straight Plug TC-400-NMH-D 3190-552 <1.25:1 (10) Hex/Knurl Solder Crimp A/G 1.5 (38) 0.89(22.6) 0.113(51.3) Right Angle 3190-422 Solder Crimp S/G 1.8 (46) 1.25(31.8) 0.130(59.0) Right Angle Solder Crimp A/G 1.8 (46) 1.25(31.8) 0.130(59.0) SMA Male Straight Plug TC-400-SM 3190-439 <1.25:1 (8) Hex Solder Crimp N/G 1.2 (29) 0.50(12.7) 0.032(14.5) TNC Male Straight Plug TC-400-TM 3190-260 <1.25:1 (2.5) Knurl Solder Crimp N/S 1.7 (43) 0.59(15.0) 0.074(33.6) Right Angle TC-400-TM-RA 3190-442 <1.35:1 (2.5) Knurl Solder Crimp N/G 1.7 (43) 0.59(15.0) 0.085(38.6) TC-400-NMH-RA # <1.35:1 (6) Hex TC-400-NMH-RA-D 3190-2293 <1.35:1 (6) Hex/Knurl # # * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair Available in bulk pack # 64 (800) TMS-COAX • www.timesmicrowave.com HG-400T GK-S400TT Hardware Accessories Type Ground Kit Hoisting Grip Part Number Stock Code GK-S400TT HG-400T GK-S400TT HG-400T Description Standard Grounding Kit (each) Laced Type (each) CT-400/300 HX-4 Y1719 CR-400 CCT-01 Install Tools Type Part Number Crimp Tool HX-4 Crimp Dies Y1719 Crimp Tool CT-400/300 Crimp Rings CR-400 Cutting Tool CCT-01 Replacement Blade RB-01 Stock Code 3190-200 3190-202 3190-666 3190-830 3190-1544 3190-1609 Description Crimp Handle .429" Hex Dies Crimp tool for LMR 400 connectors Crimp rings for TC/EZ-400 connectors (package of 10) Cable end flush cut tool Replacement blade for cutting tool (800) TMS-COAX • www.timesmicrowave.com 65 LMR-400-UF TIMES MICROWAVE SYSTEMS