SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .030 inch Diameter TECHNICAL DATA SHEET PE44129 SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .030 inch Diameter Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Jack 0.062 inch End Launch Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.562 [14.27] 0.375 [9.53] 0.312 [7.92] Weight, lbs [g] 0.004 [1.81] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMB Jack Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .030 inch Diameter from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .030 inch Diameter PE44129 URL: http://www.pasternack.com/smb-jack-standard-0.062-end-launch-connector-pe44129-p.aspx PE44129 REV 1