SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .020 inch x .010 inch Contact TECHNICAL DATA SHEET PE44135 SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .020 inch x .010 inch Contact Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Jack 0.062 inch End Launch Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.562 [14.27] 0.312 [7.92] 0.375 [9.53] Weight, lbs [g] 0.004 [1.81] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMB Jack Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .020 inch x .010 inch Contact from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .020 inch x .010 inch Contact PE44135 URL: http://www.pasternack.com/smb-jack-standard-0.062-end-launch-connector-pe44135-p.aspx PE44135 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE44135 REV 01 FSCM NO. 53919 PE44135 DWG TITLE CAD FILE 062702 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMB Jack Connector Solder Attachment 0.062 inch End Launch PCB, .020 inch x .010 inch Contact PE44135 CAD Drawing 2