75 Ohm 1.6/5.6 Jack Bulkhead Connector Crimp/ Solder Attachment For RG59, .362 inch DD Hole TECHNICAL DATA SHEET PE44267 75 Ohm 1.6/5.6 Jack Bulkhead Connector Crimp/Solder Attachment For RG59, .362 inch DD Hole Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method 1.6/5.6 Jack RG59 Crimp/Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.17 [29.72] 0.433 [11.00] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type 1.6/5.6 Jack Phosphor Bronze, Gold 3µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm 1.6/5.6 Jack Bulkhead Connector Crimp/Solder Attachment For RG59, .362 inch DD Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm 1.6/5.6 Jack Bulkhead Connector Crimp/Solder Attachment For RG59, .362 inch DD Hole PE44267 URL: http://www.pasternack.com/1.6-5.6-jack-standard-rg59-connector-pe44267-p.aspx PE44267 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE44267 REV 01 CONTACT: SOLDER FERRULE: .255" HEX CRIMP TOOL CRIMP SIZE REQUIRED FSCM NO. 53919 PE44267 DWG TITLE CAD FILE 070202 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm 1.6/5.6 Jack Bulkhead Connector Crimp/Solder Attachment For RG59, .362 inch DD Hole PE44267 CAD Drawing 2