PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Features Description • Four Pairs of Differential Clocks Pericom Semiconductor's PI6C20400 is a high-speed, low-noise differential clock buffer designed to be companion to PI6C410B. The device distributes the differential SRC clock from PI6C410B to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of SRC_STOP#, PWRDWN# and SMBus, SCLK and SDA. When input of either SRC_STOP# or PWRDWN# is low, the output clocks are Tristated. When PWRDWN# is low, the SDA and SCLK inputs must be Tri-stated. • Low skew < 50ps • Low jitter < 50ps • Output Enable for all outputs • Outputs tristate control via SMBus • Power Management Control • Programmable PLL Bandwidth • PLL or Fanout operation • 3.3V Operation • Packaging (Pb-free and Green): — 28-Pin SSOP (H28) & 28-Pin TSSOP (L28) Block Diagram OE_INV OE_0 & OE_3 SRC_STOP# PWRDWN# SCLK SDA Pin Configuration VDD SRC SCR# VSS VDD OUT0 OUT0# OE_0 OUT1 OUT1# VDD PLL/BYPASS# SCLK SDA Output Control OUT0 OUT0# OUT0 OUT1# SMBus Controller OUT2 OUT2# PLL/BYPASS# OUT3 OUT3# SRC SRC# DIV PLL_BW# 08-0298 PLL 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 VDD_A VSS_A IREF OE_INV VDD OUT3 OUT3# OE_3 OUT2 OUT2# VDD PLL_BW# SRC_STOP# PWRDWN# PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Pin Descriptions Type Pin Name Pin No Description SRC & SRC# Input 2, 3 0.7V Differential SRC input from PI6C410 clock synthesizer OE_0 & OE_3 Input 8, 21 3.3V LVTTL input for enabling outputs, active high. OE_0 for OUT0 / OUT0# OE_3 for OUT3 / OUT3# OE_INV Input 25 3.3V LVTTL input for inverting the OE, SRC_STOP# and PWRDWN# pins. When 0 = same stage When 1 = OE_0, OE_3, SRC_STOP#, PWRDWN# inverted. OUT[0:3] & OUT[0:3]# Output 6, 7, 9, 10, 19, 20, 22, 23 0.7V Differential outputs PLL/BYPASS# Input 12 3.3V LVTTL input for selecting fan-out of PLL operation. SCLK Input 13 SMBus compatible SCLOCK input SDA I/O 14 SMBus compatible SDATA IREF Input 26 External resistor connection to set the differential output current SRC_STOP# Input 16 3.3V LVTTL input for SRC stop, active low PLL_BW# Input 17 3.3V LVTTL input for selecting the PLL bandwidth PWRDWN# Input 15 3.3V LVTTL input for Power Down operation, active low VDD Power 1, 5, 11, 18, 24 3.3V Power Supply for Outputs VSS Ground 4 Ground for Outputs VSS_A Ground 27 Ground for PLL VDD_A Power 28 3.3V Power Supply for PLL Serial Data Interface (SMBus) PI6C20400 is a slave only SMBus device that supports indexed block read and indexed block write protocol using a single 7-bit address and read/write bit as shown below. Address assignment A6 A5 A4 A3 A2 A1 A0 R/W 1 1 0 1 1 1 0 0/1 Data Protocol 1 bit 7 bits 1 1 8 bits 1 8 bits 1 8 bits 1 Start bit Slave Addr R/W Ack Register offset Ack Byte Count =N Ack Data Byte 0 Ack … 8 bits 1 1 bit Data Byte N -1 Ack Stop bit Notes: 1. Register offset for indicating the starting register for indexed block write and indexed block read. Byte Count in write mode cannot be 0. 08-0298 2 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Data Byte 0: Control Register Bit Descriptions Type Power Up Condition Output(s) Affected Source Pin 0 Outputs Mode 0 = Divide by 2 1 = Normal RW 1 = Normal OUT[0:3], OUT[0:3]# NA 1 PLL/BYPASS# 0 = Fanout 1 = PLL RW 1 = PLL OUT[0:3], OUT[0:3]# NA 2 PLL Bandwidth 0 = High Bandwidth, 1 = Low Bandwidth RW 1 = Low OUT[0:3], OUT[0:3]# NA 3 TBD NA 4 TBD NA 5 TBD NA 6 SRC_STOP# 0 = Driven when stopped 1 = Tristate RW 0 = Driven when stopped OUT[0:3], OUT[0:3]# 7 PWRDWN# 0 = Driven when stopped 1 = Tristate RW 0 = Driven when stopped OUT[0:3], OUT[0:3]# NA Type Power Up Condition Output(s) Affected Source Pin RW 1 = Enabled OUT0, OUT0# NA RW 1 = Enabled OUT1, OUT1# NA RW 1 = Enabled OUT2, OUT2# NA RW 1 = Enabled OUT3, OUT3# NA Data Byte 1: Control Register Bit Descriptions 0 1 2 OUTPUTS enable 1 = Enabled 0 = Disabled 3 4 5 6 OUTPUTS enable 1 = Enabled 0 = Disabled 7 08-0298 3 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Data Byte 2: Control Register Descriptions Type Power Up Condition Output(s) Affected Source Pin Allow control of OUTPUTS with assertion of SRC_STOP# 0 = Free running 1 = Stopped with SRC_Stop# RW 0 = Free running OUT0, OUT0# NA RW 0 = Free running OUT1, OUT1# NA RW 0 = Free running OUT2, OUT2# NA RW 0 = Free running OUT3, OUT3# NA Type Power Up Condition Output(s) Affected Source Pin Type Power Up Condition Output(s) Affected Pin 0 R 0 NA NA 1 R 0 NA NA 2 R 0 NA NA R 0 NA NA R 0 NA NA 5 R 1 NA NA 6 R 0 NA NA 7 R 0 NA NA Bit 0 1 2 3 4 5 6 Allow control of OUTPUTS with assertion of SRC_STOP# 0 = Free running 1 = Stopped with SRC_Stop# 7 Data Byte 3: Control Register Bit Descriptions 0 RW 1 RW 2 RW 3 TBD 4 RW RW 5 RW 6 RW 7 RW Data Byte 4: Pericom ID Register Bit Descriptions 3 Pericom ID 4 08-0298 4 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Functionality PWRDWN# OUT OUT# SRC_Stop# OUT OUT# 1 Normal Normal 1 Normal Normal 0 IREF × 2 or Float Low 0 IREF × 6 or Float Low Power Down (PWRDWN# assertion) PWRDWN# OUT OUT# Figure 1. Power down sequence Power Down (PWRDWN# De-assertion) Tstable <1ms PWRDWN# OUT OUT# Tdrive_PwrDwn# <300us, >200mV Figure 2. Power down de-assert sequence 08-0298 5 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Current-mode output buffer characteristics of OUT[0:3], OUT[0:3]# VDD (3.3V ± 5%) Slope ~ 1/Rs RO IOUT ROS Iout 0V VOUT = 0.85V max 0.85V Figure 9. Simplified diagram of current-mode output buffer Differential Clock Buffer characteristics Symbol Minimum Maximum RO 3000Ω N/A ROS unspecified unspecified VOUT N/A 850mV Current Accuracy Symbol Conditions Configuration IOUT VDD = 3.30 ±5% RREF = 475Ω 1% IREF = 2.32mA Load Nominal test load for given configuration Min. Max. -12% INOMINAL +12% INOMINAL Note: 1. INOMINAL refers to the expected current based on the configuration of the device. Differential Clock Output Current Board Target Trace/Term Z Reference R, Iref = VDD/(3xRr) Output Current VOH @ Z 100Ω (100Ω differential ≈ 15% coupling ratio) RREF = 475Ω 1%, IREF = 2.32mA IOH = 6 x IREF 0.7V @ 50 08-0298 6 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets Absolute Maximum Ratings (Over operating free-air temperature range) Symbol VDD_A Parameters Min. Max. 3.3V Core Supply Voltage -0.5 4.6 VDD 3.3V I/O Supply Voltage -0.5 4.6 VIH Input High Voltage VIL Input Low Voltage -0.5 Storage Temperature -65 Ts VESD 4.6 ESD Protection 150 2000 Units V °C V Note: 1. Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. DC Electrical Characteristics (VDD = 3.3±5%, VDD_A = 3.3±5%) Symbol Parameters VDD_A Min. Max. 3.3V Core Supply Voltage 3.135 3.465 VDD 3.3V I/O Supply Voltage 3.135 3.465 VIH 3.3V Input High Voltage 2.0 VDD + 0.3 VIL 3.3V Input Low Voltage VSS – 0.3 0.8 IIK Input Leakage Current 0 < VIN < VDD -5 +5 VOH 3.3V Output High Voltage IOH = -1mA 2.4 VOL 3.3V Output Low Voltage IOL = 1mA IOH Output High Current IOH = 6 x IREF, IREF = 2.32mA CIN Input Pin Capacitance COUT Output Pin Capacitance 6 LPIN Pin Inductance 7 IDD Power Supply Current VDD = 3.465V, FCPU = 200MHz 200 ISS Power Down Current Driven outputs 40 ISS Power Down Current Tristate outputs 12 TA Ambient Temperature 08-0298 Condition VDD 0.4 12.2 15.6 3 0 7 5 70 PS8744C Units V μA V mA pF nH mA °C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets AC Switching Characteristics (VDD = 3.3±5%, VDD_A = 3.3±5%) Symbol Parameters Min Max. Units Notes 175 700 ps 2 Trise / Tfall Rise and Fall Time (measured between 0.175V to 0.525V) ΔTrise / ΔTfall Rise and Fall Time Variation 125 ps 2 Rise/Fall Matching 20 % 2 ±250 ps 6.5 ns PLL Mode Tpd Non-PLL Mode 2.5 Tskew Output-to-Output Skew 50 ps 3 Tjitter Cycle – Cycle Jitter 50 ps 3, 4 VHIGH Voltage High including overshoot 660 1150 mV 2 VLOW Voltage Low including undershoot -300 mV 2 Vcross Absolute crossing point voltages 250 550 mV 2 ΔVcross Total Variation of Vcross over all edges 140 mV 2 TDC Duty Cycle 55 % 3 45 Notes: 1. Test configuration is Rs = 33.2Ω, Rp = 49.9Ω, and 2pF. 2. Measurement taken from Single Ended waveform. 3. Measurement taken from Differential waveform. 4. Measurement taken using M1 data capture analysis tool. Configuration Test Load Board Termination Rs 33Ω 5% OUT TLA PI6C20400 Rs 33Ω 5% OUT# TLB 475Ω 1% 08-0298 Rp 49.9Ω 1% Rp 49.9Ω 1% 8 2pF 5% 2pF 5% PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets $/#5-%.4#/.42/,./ 0$ 2%6)3)/.$ $!4% "3# -AX 3%!4).' 0,!.% "3# Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335 • www.pericom.com Note: 1. Package Outline Exclusive of Mold Flash and Metal Burr 2. Controlling dimentions in millimeters 3. Ref: JEDEC MO-153F/AE $%3#2)04)/.0IN-IL7IDE433/0 0!#+!'%#/$%, 08-0298 9 PS8744C 11/13/08 PI6C20400 1:4 Clock Driver for Intel PCI Express Chipsets $/#5-%.4#/.42/,./ 0$ 2%6)3)/.$ $!4% "3# -AX 3%!4).' 0,!.% "3# Pericom Semiconductor Corporation 3545 N. 1st Street, San Jose, CA 95134 1-800-435-2335 • www.pericom.com Note: 1. Package Outline Exclusive of Mold Flash and Metal Burr 2. Controlling dimentions in millimeters 3. Ref: JEDEC MO-153F/AE $%3#2)04)/.0IN-IL7IDE433/0 0!#+!'%#/$%, Ordering Information(1-3) Ordering Code Package Code Package Description PI6C20400HE HE 28-pin, 209-mil wide, SSOP, Pb-Free and Green PI6C20400LE LE 28-pin, 173-mil wide, TSSOP, Pb-Free and Green Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. E = Pb-free and Green 3. Adding an X suffix = Tape/Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 08-0298 10 PS8744C 11/13/08