05129 STF701 Only One Name Means ProTek’Tion™ emi filter/tvs array Description The STF701 is a TVS/Filter combination network designed to reduce EMI/RFI noise on data I/O ports and provide transient voltage protection and noise suppression on transceivers operating up to 100 MHz. This device is packaged in a SC70-5L configuration with a common ground pin for both TVS/Filter networks. Each device consists of two networks to be used for common-mode protection against ESD and other transients. SC70-5L package Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • ESD Protection > 25 kilovolts • 175 Watts Peak Pulse Power per Line(tp = 8/20µs) • Bidirectional EMI Filtering • Low Insertion Loss Up to 10MHz, -3dB Roll-Off @ 40MHz • Protection for 2 Data Lines • RoHS Compliant • REACH Compliant • SMART Phones • Portable Electronics mechanical characteristics • Molded JEDEC SC70-5L Package • Approximate Weight: 7milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION IN 1 1 5 OUT 1 GND 2 4 OUT 2 IN 2 3 05129.R11 10/12 Page 1 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 175 Watts Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Typical Series Resistance per Line TL -55 to 150 °C TSTG -55 to 150 °C R 40 Ohms ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER device marking STF701 05F RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE VWM VOLTS 5.0 MAXIMUM reverse LEAKAGE CURRENT @3.3V ID µA typical capacitor (Per Junction) maximum CAPACITANCE (Note 1) @ 1mA V(BR) VOLTS MAXIMUM reverse LEAKAGE CURRENT @V WM ID µA @0V, 1MHz Cj pF @0V, 1MHz CTOT pF 6.0 5.0 1.0 40 160 NOTES 1. Capacitance measured between input or output and ground. figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 175W, 8/20µs Waveform 100 10 0.1 05129.R11 10/12 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ typical device characteristics figure 2 pulse wave form tf 100 Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 td = t/(IPP/2) 60 40 20 20 0 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 120 figure 3 power derating curve 0 5 10 15 t - Time - µs 20 25 0 30 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 overshoot & clamping voltage 40 5 Volts per Division 30 20 10 0 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) 05129.R11 10/12 Page 3 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ typical device characteristics figure 5 insertion loss 10 db per Division 20 Ref 0 -20 100 MHz per Division 10 db per Division figure 6 return loss 20 Ref 0 -20 100 MHz per Division 05129.R11 10/12 Page 4 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ SC70-5L package information D outline dimensions dim millimeters E inches min max min max A 1.90 2.15 0.074 0.084 B 1.15 1.35 0.045 0.055 C 0.80 1.00 0.031 0.040 D 0.15 0.30 0.005 0.012 E 0.65 BSC 0.026 BSC F 1.30 BSC 0.051 BSC G 0.80 1.10 0.031 0.043 J 0.08 0.25 0.003 0.010 K 2.00 2.40 0.078 0.095 L - 0.10 - 0.004 M 0.26 0.46 0.010 0.018 4 5 0° - 8° K 1 3 2 L J B F M A C G NOTES 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. pad layout dimensions millimeters inches NOMINAL NOMINAL A 0.50 0.020 B 1.30 0.051 C 0.65 0.026 D 1.72 0.068 E 0.60 0.024 dim B C E D A NOTES 1. Controlling dimension: inches. 05129.R11 10/12 Page 5 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 P2 D t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 F W K0 B0 Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06005.R4 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty STF701 -LF -T7 3,000 7” n/a This device is only available in a Lead-Free configuration. 05129.R11 10/12 Page 6 www.protekdevices.com 05129 STF701 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2001 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05129.R11 10/12 Page 7 www.protekdevices.com