SR0220 THRU SR02200 LOW Vf SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 200 Volts CURRENT 0.2 Ampere FEATURES * * * * * * Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram .034 (0.9) .028 (0.7) 1.0 (25.4) DIA. MIN. .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. 1.0 (25.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN. Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL SR0220 SR0230 SR0240 SR0250 SR0260 SR0280 SR02100 SR02150 SR02200 UNITS RATINGS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 150 200 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts VDC 20 30 40 50 60 80 100 150 200 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A=110 OC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 1) Volts IO 0.2 Amps I FSM 60 Amps 2 IT 14.9 A 2S RqJA 50 RqJL 15 0 C/W Typical Junction Capacitance (Note 3) CJ 110 pF Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.2A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C NOTES : 1. 2. 3. 4. SYMBOL SR0220 SR0230 SR0240 SR0250 SR0260 SR0280 SR02100 SR02150 SR02200 UNITS VF IR Thermal Resistance : At 9.5mm lead lengths, PCB mounted. Measured at 1 MHz and applied reverse voltage of 4.0 volts. "Fully ROHS compliant", "100% Sn plating (Pb-free)". Available in Halogen-free epoxy by adding suffix -HF after the part nbr. .28 Volts 1.0 mA 10 mA 2010-05 REV: O 0.25 0.20 0.15 0.10 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Length 0.05 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (mA) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( SR0220 THRU SR02200 ) 100 TA = 125 OC 10 1.0 TA = 75 OC TA = 25 OC 0.1 0.01 SR0220 ~SR0240 SR0250~SR0260 SR0280~SR02200 0 20 O CJ, JUNCTION CAPACITANCE, (pF) 50 10 1.0 0.1 TJ = 25 OC Pulse width=300mS 1% Duty Cycle 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 40 60 1.6 1.8 400 120 140 TJ = 25 OC 200 100 80 60 40 20 10 0.1 0.4 1.0 4 10 40 REVERSE VOLTAGE, (V) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 60 FIG.4 TYPICAL JUNCTION CAPACITANCE 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 1 100 FIG.2 TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE, (V) 0 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) AMBIENT TEMPERATURE, ( C) 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 80100 PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-41 -B EA PER BOX INNER BOX SIZE (mm) 1,000 194*75*21 CARTON SIZE EA PER CARTON (mm) 415*220*255 50,000 GROSS WEIGHT(Kg) 16.2 REEL PACK PACKAGE DO-41 PACKING EA PER REEL CODE -T 5,000 COMPONENT TAPE SPACE SPACE(mm) (mm) 5.0 52 REEL DIA (mm) CARTON SIZE EA PER GROSS CARTON WEIGHT(Kg) (mm) 330 355*350*335 20,000 10.49 BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) AMMO PACK PACKAGE PACKING CODE REEL ( EA ) COMPONENT TAPE SPACE SPACE(mm) (mm) DO-41 -F 3,000 5.0 52 255*73*100 400*268*225 30,000 13.0 DO-41 -E 3,000 5.0 26 256*48*94 42,000 12.41 365*270*217 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.