RFHIC RTP09050-20

Preliminary
RTP09050-20
GaN Power Amp Pallet
Product Features
Application
• Doherty amplifier design
• Small and light weight
• 50 Ohm Input/Output impedance matched
• Highly reliable and rugged design
• High efficiency, High Gain
• 52.5W typical PAVG
• LTE, GSM RRH
Description
The RTP09050-20 is designed for RF system application frequencies from 925MHz to 960MHz, with high gain. This Pallet
Amplifier uses GaN on Sic HEMT technology which performs high breakdown voltage, high linearity, and high efficiency.
The RTP09050-20 is a LTE DPD application amplifier
Electrical Specifications @ VDD= 45V, 50Ω System
PARAMETER
Symbol
Specification
Frequency Range
BW
925 ~ 960MHz
Operating Bandwidth within BW
OBW
5 ~ 35MHz
Average Output Power
Pout
47.2dBm(52.5W) Avg. @ LTE 1FA 10MHz
Peak Output Power
Psat
54.2dBm (Min.) @ Duty 10% Pulse
ACLR (LTE 1FA 10MHZ)
@ Po=+47.2dBm max.
GSM Multi Carrier IMD
(PAPR 7.5dB)
Pre-DPD
-26dBc(Min) @±10MHz
@-30 ~ +65°C
Post-DPD
-53dBc(Min) @±10MHz
45V, CFR 6.5dB
Pre-DPD
-25dBc(Min) @±15MHz
@-30 ~ +65°C
Post-DPD
-55dBc(Min) @±15MHz
45V, CFR 7.5dB
ACLR
IMD
G
55dB (Min.)
Gain Flatness
ΔG
2.0 dB(Peak to peak) @ Operating Frequency
Input Return Loss
S11
-12dB (Max.)
Output Return Loss
S22
-17dB (Max.)
Normal Operating Voltage
VDC
+5.6V & +45V
Current Consumption
IDD
Efficiency
Eff
39% @ 45V (Typ.)
Feedback Output level @ 47.2dBm
FB
+9dBm ± 1.5dB
Temp Detector
T
0.9V @ 40℃
RF Gain @ 25℃
0.2A @ 5.6V (Max.)
3.0A @ 45V (Typ.)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
RTP09050-20
GaN Power Amp Pallet
Environmental Characteristics
Parameter
Symbol
Min.
Ta
Storage Temperature
Tstg
Relative humidity w/o condensation
RH
Operating Ambient Temperature
Typ.
Max.
Unit
-30
+65
°C
-40
+130
°C
80
%
Maximum Rating
POD
-2dBm
Max.
Load VSWR
Ψ
∞ : 1 (All Phase & Amplitude)
Nom.
Operating Case Temperature
Tc
+100
°C
Input Overdrive
Interface Connector
8-Pin-Control (MOLEX_5267_08)
Pin #
Description
Specifications
1
Vcc
+5.6V
2-4
Vcc
+45V
5-8
GND
GROUND
Yeonho 4Pin-Control (SMW200-04P)
Pin #
Description
Specifications
1
Enable
Amp Enable(+5.6V) / Amp Disable(+0V)
2-3
GND
GROUND
4
Temp DET
Temp Sense (0.9V @ 40℃)
Mechanical Specifications
Parameter
Dimensions
Weight
RF Connectors
(Input, Output, Output Coupling)
I/O Connector
Cooling
Value
Units
170 ⅹ 100 ⅹ 18.8
mm
0.6(max)
Kg
Limits
SMA(Female)
SMW200 4pin(Male)
Molex 8pin(Male)
External Heat-sink
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
RTP09050-20
GaN Power Amp Pallet
Outline Drawing
4
I/O
1 Enable
2 GND
3 GND
4 Temp DET
1
1
INPUT
I/O
8
1
2
3
4
5
6
7
8
+5.6V
+31V
+31V
+31V
GND
GND
GND
GND
FB
OUTPUT
CAUTION
WHEN THE CASE IS OPEN
THIS DEVICE IS SUSCEPTIBLE
TO DAMAGE FROM E.S.D OR E.M.I
(0,0)
COVER (T=11.7)
GASKET (T=0.3)
PCB (T=0.8)
FLANGE (T=6.0)
*Note : Connector positions and module mount holes may be subjected change.
Unit : mm
RTP09050-20 Budget
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
GaN Power Amp Pallet
RTP09050-20
Test Data (Test Results: DPD Operation)
Test Equipments
-
DPD Engine : Optichron OP6180 Board
-
Signal Generator : E4438C (Agilent)
-
Spectrum Analyzer : E4440A (Agilent)
-
Network Analyzer : 8753ES (Agilent)
-
Power Supply : 6674A (Agilent)
Test Condition
●
-
Signal : LTE 1FA 10MHz(PAPR 6.5dB) & GSM 4FA(PAPR 7.5dB)
-
CFR apply
-
AMP Temperature: 40°C
Input VSWR (S11) & Gain (S21)
●
Pre – DPD @ 930MHz
●
Output VSWR (S22)
● Post-
DPD @ 930MHz
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
GaN Power Amp Pallet
●
RTP09050-20
Pre – DPD @ 942.5MHz
● Post-
DPD @ 942.5MHz
Pre – DPD @ 955MHz
● Post-
DPD @ 955MHz
●
Pulse Duty 10% @ 930MHz
Pulse Duty 10% @ 942.5MHz
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
GaN Power Amp Pallet
RTP09050-20
Pulse Duty 10% @ 955MHz
GSM 4FA Tone Spacing 15MHz (Fc = 942.5MHz ,PAPR 7.5dB)
GSM 4FA Tone Spacing 15MHz (Fc = 942.5MHz,PAPR 7.5dB)
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0
Preliminary
GaN Power Amp Pallet
RTP09050-20
Test Sheet
S/N
0001
Gain
55.2 dB
Gain Flatness
1.03 dB
S11(Min)
-13.1 dB
S22(Min)
-20.5 dB
Feedback level@ 47.2dBm
9.5 dBm
Test Frequency (@Center)
930 MHz
942.5 MHz
955 MHz
Psat (dBm)
54.8
55.09
55.11
Pre-DPD
-27.3
-26.5
-26.4
Post-DPD
-56.8
-56.1
-55.0
300mA/5.6V, Current/45V
A
2.91
2.9
2.92
Efficiency
%
40
40.2
39.9
LTE
10MHz
ACLR@±10MHz
(dBc)
@50W
GSM 4FA @
Worst
Tone Spacing
Spurious
15MHz (PAPR 7.5dB)
(dBc)
Pre-DPD
-27.26
Post-DPD
-60.01
RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not
assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or
incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for
inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not
intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells
such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders,
employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of
whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.
▪ Tel : 82-31-250-5078
▪ All specifications may change without notice.
▪ [email protected]
▪ Version 1.0