SF2199E • Surface Mount 3.0 x 3.0 mm Package • Complies with Directive 2002/95/EC (RoHS) Pb 787 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Input Power Level 20 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile 260 °C for 30 s SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Center Frequency fC 787 Insertion Loss, 776 to 798 MHz IL 2.4 3.0 0.6 1.5 Amplitude Ripple, 776 to 798 MHz Return Loss, 776 to 798 MHz 7 10 10 to 746 MHz 30 54 746 to 756 MHz 30 52 1056 to 1078 MHz 40 62 25 31 Units MHz dB Attenuation, 0 dB Reference: 1078 to 2700 MHz Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity dB 929, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Input 2 Output 5 Case Ground All others 1 6 5 0 o h m L o a d 5 4 (b o tto m 5 0 o h m S o u rc e 2 3 v ie w ) CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] © 2009-2012 by RF Monolithics, Inc. Page 1 of 5 SF2199E - 4/25/12 Filter Response Plots 787 MHz filter 0 S21 -1 spec. -2 -3 Att.(dB) -4 -5 -6 -7 -8 -9 -10 762 767 772 777 782 787 792 797 802 807 812 Fr eq.( MHz ) 787 MHz filter 0 S21 spec. - 10 Att.(dB) - 20 - 30 - 40 - 50 - 60 - 70 687 707 727 747 767 787 807 827 847 867 887 Fr eq.(MHz) www.RFM.com E-mail: [email protected] © 2009-2012 by RF Monolithics, Inc. Page 2 of 5 SF2199E - 4/25/12 787 MHz filter 0 S21 -10 s pec . -20 Att.(dB) -30 -40 -50 -60 -70 -80 10 217 424 631 838 1045 1251 1458 1665 1872 2079 2286 2493 2700 Freq.(MHz ) www.RFM.com E-mail: [email protected] © 2009-2012 by RF Monolithics, Inc. Page 3 of 5 SF2199E - 4/25/12 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 6 1 3 929 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] © 2009-2012 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 4 of 5 SF2199E - 4/25/12 Tape and Reel Specifications Quantity Per Reel 7 178 1000 13 330 3000 "B" REF. 100 REF. Inches “B” millimeters See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 3.35 mm 3.35 mm 1.40 mm 8.0 mm 12.0 mm Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] © 2009-2012 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2199E - 4/25/12