– N EW P RODUCT I NTRODUCTION – µA733M/BCA Rochester Electronics has re-introduced and continues to manufacture critically needed semiconductors with the full authorization of the original manufacturer and an attention to quality that meets or exceeds the original component. Original Manufacturer: Re-introduced by Rochester Electronics on April, 3, 2012 µA733M/BCA Original Part Number: µA733M Description: Video Amplifier Package: 14 pin DIP Manufacturing Flow: QML Manufacturing Type: made from original Texas Instruments wafers Related Devices [ by temperature / package type / speed / application ] µA733MJ UA733ML/883B UA733MU UA733MU/883B UA733MUB UA733MW UA733CA UA733CJ UA733CN UA733CNP3 TWO-STAGE VIDEO AMPLIFIER reintroducing the µA733M version The µA733 is a monolithic two-stage video amplifier with differential inputs and differential outputs. Internal series-shunt feedback provides wide bandwidth, low phase distortion, and excellent gain stability. Emitter-follower outputs enable the device to drive capacitive loads, and all stages are current-source biased to obtain high common-mode and supplyvoltage rejection ratios. The µA733C is characterized for operation from 0°C to 70°C; the µA733M is characterized for operation over the full military temperature of -55°C to 125°C. Worldwide Corporate Headquarters 16 Malcolm Hoyt Drive . Newburyport, MA 01950 phone 978.462.9332 . email [email protected] . web www.rocelec.com © Rochester Electronics, LLC - All Rights Reserved - 07302012