TLV CHIP ALUMINUM ELECTROLYTIC CAPACITORS TLV NEW SERIES 105oC Long Life, Low Impedance, Lead Free Reflow Soldering. FEATURES • Load Life 105°C 5000Hrs. • Reflow soldering is available. • Large can-size SMD. • RoHS compliance. SPECIFICATIONS Items Characteristics -55∼ +105°C Category Temperature Range 6.3∼ 35V.DC Rated Voltage Range + 20％ (20°C, - Capacitance Tolerance 120Hz) I=0.01CV or 3 µA whichever is greater. (After 2 minutes) Leakage Current(MAX) I=Leakage Current(µA) C=Rated Capacitance(µF) Rated Voltage 6.3 10 16 25 35 (V) tan δ 0.26 0.19 0.16 0.14 0.12 (tanδ) Dissipation Factor(MAX) V=Rated Voltage(V) When rated capacitance is over 1000 µF, tanδ shall be added 0.02 to the listed value with Increase of over 1000 µF. After applying rated voltage with rated ripple current for 5000 hrs at 105°C, the capacitors shall Meet the following requirements. Endurance Within Dissipation Factor Not more than 200％ of the specified value. (φ 8.φ 10：300％) Leakage Current Not more than the specified value. Rated Voltage 6.3 (V) Z（-25°C）/Z （20°C） 2 （20°C） 3 Z （-40°C）/Z ° （20°C） 4 Z （-55 C）/Z Low Temperature Stability Impedance Ratio(MAX) + 30％ of the initial value. - Capacitance Change 10 16 25 35 2 2 2 2 3 4 3 4 3 3 3 3 (120Hz) MARKING MULTIPLIER FOR RIPPLE CURRENT <φ 8,φ 10> Frequency （Hz） 120 1K 10K 0.50 0.80 0.95 1.00 220∼ 10000 0.60 0.85 0.95 1.00 AA 47 CTL Capacitance Lot No. AA 2200 1C TL Capacitance Coefficient Rated voltage code∗ Polarity of the terminals Rated voltage code∗ ∗Voltage code Rated Voltage (V) PART NUMBER D ×L TLV Series Rated Capacitance Capacitance Tolerance Option Series Series Polarity of the terminals Rated Voltage ∼ φ 18> Lot No. 100K < = 47∼ 150 <φ 12.5 Lead Forming Case Size Voltage code φD< = 10 6.3 10 j A 16 25 35 C E V φ D< = 12.5 0J 1A 1C 1E 1V TLV CHIP ALUMINUM ELECTROLYTIC CAPACITORS DIMENSIONS (mm) φD L A1 B1 C W1 P K 8 10.5 8.3 8.3 2.9 0.8∼1.1 3.1 0.5Max α 0 10 10.5 10.3 10.3 3.2 0.8∼1.1 4.5 0.5Max 0 12.5 13.5 13 12.5 16 13 13 4.9 0.8∼1.1 4.5 + 0.4 0.7 - 0.5 13 4.9 0.8∼1.1 4.5 + 0.4 0.7 + 0.4 0.7 - 0.5 16 16.5 17 17 6 1.0∼1.6 6.8 16 21.5 17 17 6 + 0.4 0.5 1.0∼1.6 6.8 0.7 - 18 16.5 19 19 7 + 0.4 0.5 1.0∼1.6 6.8 0.7 - 18 21.5 19 19 7 + 0.4 0.5 1.0∼1.6 6.8 0.7 - 0.5 STANDARD SIZE Size φDXL(mm), Ripple current(mA r.m.s./105°C,100kHz), Impedance(ΩMax/20°C,100kHz) WV (V.DC) 6.3 (0J) 10 (1A) 16 (1C) Cap (µF) Size (φ DXL) Ripple Z 2200 12.5×13.5 1100 3300 12.5×16 4700 WV (V.DC) Cap (µF) Size (φ DXL) Ripple Z 0.065 220 8×10.5 600 0.16 1400 0.055 330 8×10.5 600 0.16 16×16.5 1800 0.045 470 10×10.5 850 0.08 6800 16×21.5 2330 0.029 1000 12.5×13.5 1100 0.065 10000 18×21.5 2640 0.028 1500 16×16.5 1800 0.045 1000 10×10.5 850 0.08 2200 18×16.5 2060 0.044 2200 12.5×16 1400 0.055 3300 18×21.5 2640 0.028 3300 16×16.5 1800 0.045 100 8×10.5 600 0.16 4700 18×16.5 2060 0.044 100 10×10.5 850 0.08 6800 18×21.5 2640 0.028 150 8×10.5 600 0.16 470 8×10.5 600 0.16 220 8×10.5 600 0.16 680 10×10.5 850 0.08 330 10×10.5 850 0.08 1500 12.5×13.5 1100 0.065 680 12.5×13.5 1100 0.065 2200 16×16.5 1800 0.045 1000 16×16.5 1800 0.045 3300 18×16.5 2060 0.044 1500 18×16.5 2060 0.044 4700 16×21.5 2330 0.029 2200 16×21.5 2330 0.029 25 (1E) 35 (1V)