http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Features ・Built-in IGBT and diode bridge of partial switching PFC circuit Enable to reduce mounting area ・Low saturation voltage IGBT VCE(sat) = 1.7V max ・Low saturation voltage diode bridge VF = 1.1V max ・The clip lead is adopted for inner lead. Low inductance, low resistance, high current capability The smoke generation and explosion are less likely to occur in case of destruction. Oct.2010 Package ＳＬＡ Equivalent circuit 3 (cut) 5 4 1 Applications ・Partial switching PFC 2 6 Absolute maximum ratings (Ta=25℃) Characteristic Symbol Collector to Emitter Voltage VCES 600 V Gate to Emitter Voltage VGE ±30 V 30 A 100 A VRM 600 V IF 25 A IFSM ※2 200 A Diode I2t Limiting Value I2t ※3 200 A2s Maximum Allowable Power Dissipation PT※4 IC(DC) Continuous Collector Current Pulsed Collector Current Ratings IC (pulse) Diode Peak Reverse Voltage Diode Forward Current Diode Peak Surge Forward Current ※1 5 92 Thermal Resistance θj-a※4 25 θj-c※4 1.36 θj-c IGBT Operating Junction Temperature Storage Temperature ※1. PW≦10μs, Duty≦1% ※3. 1ms≦PW≦10ms (Junction-to-Ambient) °C /W ( Junction-to-Case ) °C /W 3.91 ( Junction-to-Case,IGBT 1 Element Operation ) ( Junction-to-Case,Di 1 Element Operation ) 1500 VISO ( Between Fin and Lead Pin, 1minute AC) °C /W °C /W Vrms Tj 150 °C Tstg -40∼150 °C ※2. PW≦10ms, Half sinewave, 1shot ※4. All Element Operation The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Ｗ (Tc=25°C) 8.33 θj-c Di Isolation Voltage (No.Fin Ta=25°C) Unit Page 1 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Electrical characteristics ● ＩＧＢＴ (Ta=25°C) Characteristic Limits typ unit Symbol Test Conditions V(BR)CES IC= 100μA, VGE=0V Gate to Emitter Leakage Current IGES VGE= ±30V ±500 nA Collector to Emitter Leakage Current ICES VCE= 600V,VGE=0V 100 μA Gate Threshold Voltage VGE(th) VCE= 10V,ID=1mA 6 V Collector to Emitter Saturation Voltage VCE(sat) VGE=15V,IC= 30A 1.3 1.7 V Collector to Emitter Saturation Voltage VCE(sat) VGE=15V,IC= 50A 1.6 Collector to Emitter Breakdown Voltage Input Capacitance min 600 V 3 Cies Coes Reverse Transfer Capacitance Cres 80 td(on) 80 Rise Time 150 IC=50A VCE≒300V RG=39Ω VGE=±15V See fig.1 tr Turn-Off Delay Time V 2500 VCE=20V f=1.0MHz VGE=0V Output Capacitance Turn-On Delay Time max td(off) pF 190 ns 120 tf 320 Symbol Test Conditions Limits Forward Voltage Drop VF IF= 12.5A 1.1 Reverse Leakage Current IR VR=600V 50 Reverse Leakage Current Under High Temperature H·IR VR=600V,Tj=150°C 200 Fall Time ● Ｄｉ (Ta=25°C) Characteristic min typ max The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 2 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Electrical characteristics IC - VCE (typical) IC - VCE (typical) Tc=25℃ 15V 10V 100 Tc=125℃ 15V 10V 100 VGE=20V VGE=20V 8V 80 8V 80 7V 7V IC (A) IC (A) 60 40 60 40 6V 20 20 6V 0 0 0 1 2 3 4 5 0 1 2 VCE （V) 3 4 5 VCE （V) VCE(sat) - Tc (typical) IC - VGE (typical) VCE=5V VGE=15V 3 100 IC=100A 2 50A IC (A) VCE(sat) (V) 80 70A 30A 1 10A 60 40 Tc=-40℃ 25℃ 20 １25℃ 0 0 -50 0 50 100 150 0 5 Tc （℃) Capa - VCE (typical) 15 VCE,VGE - Qg (typical) Tc=25℃ f=1MHz VGE＝0V 40 VCE (×10V) , VGE (V) 10000 Capacitance(pF) 10 VGE （V) Cies 1000 Coes 100 Cres 10 Tc=25℃ RL=6Ω VCE 30 20 VGE 10 0 0 10 20 30 40 50 0 VCE(V) 20 40 60 Qg (nC) The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 3 80 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Electrical characteristics VCE - VGE (typical) SWTime - IC (typical) Tc=-40℃ Tc=-40℃ 5 1000 SWTime (ns) VCE (V) 4 3 2 IC=100A 50A tf 100 tdoff tdon tr R Load VCE=300V VGE=±15V RG=39Ω 10A 1 10 0 1 10 1 100 10 100 IC （A) VGE （V) VCE - VGE (typical) SWTime - IC (typical) Tc=25℃ Tc=25℃ 5 1000 4 SWTime (ns) VCE (V) tf 3 2 IC=100A 50A tdoff 100 tdon tr 10A 1 0 R Load VCE=300V GE=±15V RG=39Ω 10 1 10 100 1 10 VGE （V) 100 IC （A) VCE - VGE (typical) SWTime - IC (typical) Tc=125℃ Tc=125℃ 5 1000 tf SWTime (ns) VCE (V) 4 3 IC=100A 2 50A tdoff 100 tr tdon 10A 1 R Load VCE=300V VGE=±15V RG=39Ω 0 10 1 10 VGE （V) 100 1 10 IC （A) The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 4 100 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Electrical characteristics IF - VF (typical) SWTime - RG (typical) Tc=-40℃ 100 1000 tf 100 IF (A) SWTime (ns) 80 tr tdoff 60 40 25℃ R Load IC=50A RL=6Ω VGE=±15V tdon 20 10 １25℃ 0 1 10 100 0 1 RG （Ω) 2 3 VF （V) SWTime - RG (typical) S AFE OPERATING AREA Tc=25℃ 1000 1000 tf tr 100 IC [A] SWTime (ns) IC(pulse) max 100 tdoff 10 10μs tdon 10 100μs 1ms 0.1 10 1 IGBT Tc=25℃ 1shot 1 R Load IC=50A RL=6Ω VGE=±15V 1 100 10 1000 VCE [V] RG （Ω) SWTime - RG (typical) 100 Reverse Bias ASO Tc=125℃ 1000 1000 100 tr Tc=25℃ IC [A] SWTime (ns) tf 100 tdoff R Load IC=50A RL=6Ω VGE=±15V tdon 10 IGBT VGE=±15V Rg=39Ω 1shot 1 10 1 Tc=125℃ 10 1 100 10 100 VCE [V] RG （Ω) The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 5 1000 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Electrical characteristics TRANSIENT THERMAL RESISTANCE - PULSE WIDTH ＩＧＢＴ 1.E+01 Rth j-c (℃/W) 1.E+00 1.E-01 1.E-02 IGBT Tc=25℃ VCE＝5V 1 1素子 Device 1shot 1.E-03 1.E-04 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 PW 1.E-01 1.E+00 1.E+01 1.E+02 (sec) TRANSIENT THERMAL RESISTANCE - PULSE WIDTH Di 1.E+02 Rth j-c (℃/W) 1.E+01 1.E+00 1.E-01 Di Tc=25℃ 11素子 Device 1shot 1.E-02 1.E-03 1.E-06 1.E-05 1.E-04 1.E-03 1.E-02 PT 1.E-01 1.E+00 1.E+01 1.E+02 (sec) The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 6 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Fig.1 Oct.2010 Switching Time Test Method VCC≒300V IC=50A RL=60Ω VGE=±15V RG=39Ω (a) Test Circuit (b) Waveforms The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 7 http://www.sanken-ele.co.jp SANKEN ELECTRIC ＳＬＡ５２２７ Oct.2010 Outline Dimensions between root SLA (LF No. 822) Dimensions from tops Gate Burr a JAPAN ＳＬＡ５２２７ Dimensions from tops b Dimensions from tops Dimensions between root Dimensions from tops Dimensions from tops a：Type No. b：Lot No. Weight The information included herein is believed to be accurate and reliable. However, SANKEN ELECTRIC CO., LTD assumes no responsibility for its use ; nor for any infringements of patents or other rights of third parties that may result from its use. Copy Right: SANKEN ELECTRIC CO.,LTD. Page 8 Approx. 6g