SENSITRON SHD219720

SHD219720
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5035, REV. -
LOW RDS HERMETIC POWER MOSFET - P-CHANNEL
FEATURES:
• 60 Volt, 0.01 Ohm, 90A MOSFET
• Isolated Hermetic Metal Package
• Ultra Low RDS (on)
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT
PULSED DRAIN CURRENT
OPERATING AND STORAGE TEMPERATURE
TOTAL DEVICE DISSIPATION
THERMAL RESISTANCE, JUNCTION TO CASE
Note: * current limited by package; die rating is 90A
SYMBOL
VGS
ID25
IDM
TJ/TSTG
PD
RθJC
MIN.
-55
-
TYP.
-
MAX.
±20
- 55*
- 200
+150
205
0.6
UNITS
Volts
Amps
Amps
°C
Watts
°C/W
SYMBOL
BVDSS
MIN.
- 60
TYP.
-
MAX.
-
UNITS
Volts
-
0.010
0.012
-3
-
-1
- 50
100
-100
-
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = - 250µA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = - 10V, ID = - 30A
VGS = - 4.5V, ID = - 20A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = - 250µA
FORWARD TRANSCONDUCTANCE
VDS = - 15V, ID = - 50A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8 x Max. rating, VGS = 0V, TJ = 25°C
TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = - 30V
RISE TIME
ID = - 55A
TURN OFF DELAY TIME
VGS= - 10V
FALL TIME
RG = 2.5Ω
DIODE FORWARD VOLTAGE
IF = - 55A, VGS = 0V
Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 %
REVERSE RECOVERY TIME
TJ = 25°C,
IF= - 50A, VR = - 30V
di/dt = - 100A/µsec
REVERSE RECOVERY CURRENT
INPUT CAPACITANCE
VGS = 0 V,
OUTPUT CAPACITANCE
VDS = - 25 V,
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
Ω
RDS(ON)
VGS(th)
gfs
-1
20
0.008
0.010
-
IDSS
-
-
IGSS
-
-
td(ON)
tr
-
20
190
td(OFF)
tf
VSD
Volts
S(1/Ω)
µA
nA
nsec
-
140
300
- 1.0
- 1.5
Volts
trr
-
60
90
nsec
Irr
Ciss
Coss
Crss
-
-3
9200
975
760
- 4.5
-
A
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •
pF
SHD219720
SENSITRON
TECHNICAL DATA
DATA SHEET 5035, REV. –
MECHANICAL DIMENSIONS: in Inches / mm
.145
(3.68)
.037
(.94)
.030 (.76) Min.
.050 (1.27)
2
.375
(9.53)
1
.140 (3.56)Typ.
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
.625
(15.88)
LCC-3P
PINOUT TABLE
DEVICE TYPE
P CHANNEL MOSFET IN A
LCC-3P PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected]