SHD225701 SHDCG225701 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4146, REV. B LOW RDS HERMETIC POWER MOSFET - N-CHANNEL FEATURES: • 100 Volt, 0.011 Ohm, 90A MOSFET for Glidcop version • Isolated Hermetic Metal Package • Ultra Low RDS (on) • Ceramic Seals with Glidcop leads (SHDCG225701) MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT PULSED DRAIN CURRENT OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION THERMAL RESISTANCE, JUNCTION TO CASE Note: * current limited by package; die rating is 90A SYMBOL VGS ID25 IDM TJ/TSTG PD RθJC MIN. -55 - TYP. - MAX. ±20 55* 240 +150 210 0.6 UNITS Volts Amps Amps °C Watts °C/W SYMBOL BVDSS MIN. 100 TYP. - MAX. - UNITS Volts - 0.011 0.013 ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250µA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 30A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 30A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250µA FORWARD TRANSCONDUCTANCE VDS = 15V, ID = 30A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8 x Max. rating, VGS = 0V, TJ = 25°C TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 50V RISE TIME ID = 55A TURN OFF DELAY TIME VGS=10V FALL TIME RG = 2.5Ω DIODE FORWARD VOLTAGE IF = 30A, VGS = 0V Pulse test, t ≤ 300 µs, duty cycle d ≤ 2 % REVERSE RECOVERY TIME TJ = 25°C, IF=30A, VR = 100V di/dt = 100A/µsec INPUT CAPACITANCE VGS = 0 V, OUTPUT CAPACITANCE VDS = 25 V, REVERSE TRANSFER CAPACITANCE f = 1.0MHz Ω RDS(ON) Glidcop Version RDS(ON) Standard Version VGS(th) gfs - 0.013 0.015 2 25 - 4 - Volts S(1/Ω) IDSS - - µA IGSS - - td(ON) tr - 20 110 1 50 100 -100 30 170 nsec 100 150 1.2 Volts nsec td(OFF) tf VSD - 65 100 1.0 trr - 70 140 Ciss Coss Crss - 8700 740 450 - Ω •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] • nA pF SHD225701 SHDCG225701 SENSITRON TECHNICAL DATA DATA SHEET 4146, REV. B MECHANICAL DIMENSIONS: in Inches / mm .149 (3.78 Dia. .139 3.53) (6.60 6.32) (1.27 1.02) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .260 .249 .050 .040 .545 (13.84 .535 13.60) 1 .045 (1.14 .035 0.89) 3 Places 2 3 .150(3.81) BSC 2 Places .150(3.81) BSC TO-254 DEVICE TYPE N-CHANNEL MOSFET TO-254 PACKAGE PIN-1 DRAIN PIN-2 SOURCE PIN-3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] •