Major League Electronics .079" cl Insulation Displacement Socket Pins Per Row Dimension A B 3 .440 [11.2] .157 [4.0] 4 .519 [13.2] .236 [6.0] 5 .598 [15.2] .315 [8.0] 6 .677 [17.2] .394 [10.0] 7 .755 [19.2] .472 [12.0] 8 .834 [21.2] .551 [14.0] 9 .913 [23.2] .629 [16.0] 10 .992 [25.2] .708 [18.0] 11 1.070 [27.2] .787 [20.0] 12 1.149 [29.2] .866 [22.0] 13 1.228 [31.2] .945 [24.0] 15 1.385 [35.2] 1.102 [28.0] 16 1.464 [37.2] 1.181 [30.0] 17 1.543 [39.2] 1.260 [32.0] 18 1.622 [41.2] 1.339 [34.0] 19 1.700 [43.2] 1.417 [36.0] 20 1.779 [45.2] 1.496 [38.0] 22 1.937 [49.2] 1.653 [42.0] 24 2.094 [53.2] 1.811 [46.0] 25 2.173 [55.2] 1.890 [48.0] 28 2.409 [61.2] 2.126 [54.0] 30 2.566 [65.2] 2.283 [58.0] 32 2.724 [69.2] 2.441 [62.0] 34 2.881 [73.2] 2.598 [66.0] Ordering Information IDS-2 XX - D - 02 - XX - XX - XXX - LF Lead Free Pins Per Row only available in: 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 22, 24, 25, 28, 30, 32, 34 Polarized Position Double Leave blank if not needed Style Options 006 - 068 02 = Black Plating Options - Gold Flash Over Entire Pin - Gold Flash on Contact Area / Matte Tin on Remainder - 10µ Gold on Contact Area - 30µ Gold on Contact Area 01 = With Strain Relief 02 = Without Strain Relief F FT G H Standard plating = FT Mates with: SHSTL-2, SHBSTC-2, SHBSTCM-2, SHTSHC-2, SHTSHR-2, SHTSHSM-2 Insulator PBT, glass reinforced, rated UL 94V-0 Current Rating 1 Amp Contact Phosphor Bronze Dielectric Withstanding 500V AC for one minute Insulation Resistance 3000 MΩ min. Operating Temperature -40°C to +105°C Contact Resistance 30 mΩ max. Terminated with .039" [1.0mm] pitch flat ribbon cable Products cut to specific sizes are uncancellable/nonreturnable IDS-2 SERIES .079" cl Insulation Displacement Socket Parts are subject to change without notice 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com Revisions Revision C - (3rd Mar 2011) Contact plating amended. Revision B FT - Gold Flash on contact area / Matte Tin on Tail Revision C FT - Gold Flash on contact area / Matte Tin on Remainder Revision B - (3rd Feb 2011) Amendment to plating options in ordering grid. Revision A G - 10µ Gold on Contact area/Flash on Tail GT - 10µ Gold on Contact Area/Matte Tin on Tail FT - 3µ Selective Gold T - Matte Tin all Over F - Gold Flash Over Entire Pin (Standard Plating = T) Revision B FT - Gold Flash on contact area / Matte Tin on Tail F - Gold Flash over entire pin G - 10u Gold on contact area H - 30u Gold on contact area (Standard Plating = FT ) Width dimension (inclusive of polarization bump) changed: Was: .185 (4.70) Now: .193 (4.90) Dimension Table changed: Was: Dimension A - XX.1 (eg 3 pins per row, DIM A was 11.1, DIM A is now 11.2) Now: Dimension A - XX.2 IDS-2 SERIES .079" cl Insulation Displacement Socket 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com