Major League Electronics .050" cl x .100" cl Latching Shrouded Header Ordering Information SHTSL-6 XX - D - 02 - XX - XX - XXX - LF Lead Free Pins Per Row Only available in: 05, 10, 13, 15, 17, 20, 25, 30, 34, 40, 45, 50 Polarized Position Double 010 - 100 Leave blank if not needed Style 02 = Tail Length .126 (3.2mm) Ejector Latch Plating Options - 10µ Gold on Contact Area/Matte Tin on Tail - 3µ Selective Gold - Matte Tin all Over GT FT - Gold Flash Over Entire Pin F LL = Long SL = Short T Standard plating = FT Mates with: IDS-6 Insulator Contact Current Rating Dielectric Withstanding 1 Amp 250V AC for one minute Insulation Resistance 1000 MOHMS min. Operating Temperature -40°C to +105°C Contact Resistance Terminated with .025” [0.635mm] pitch cable assembly PBT, glass reinforced, rated UL 94V-0 Phosphor Bronze 30 mOHMSmax. Products cut to specific sizes are uncancellable/nonreturnable SHTSL-6 SERIES .050" cl x .100" cl Latching Shrouded Header - Straight Parts are subject to change without notice 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com Revisions Revision B - 2nd October 2009 Amendment to pins per row table and ordering grid, 35 option removed SHTSL-6 SERIES .050" cl x .100" cl Latching Shrouded Header - Straight 23 APR 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] W b l l t i