NSC DS1488

DS1488
Quad Line Driver
General Description
Features
The DS1488 is a quad line driver which converts standard
TTL input logic levels through one stage of inversion to output levels which meet EIA Standard RS-232D and CCITT
Recommendation V.24.
n
n
n
n
n
Current limited output: ± 10 mA typ
Power-off source impedance: 300Ω min
Simple slew rate control with external capacitor
Flexible operating supply range
Inputs are TTL/LS compatible
Schematic and Connection Diagrams
1/4 Circuit
DS005776-1
Dual-In-Line Package
DS005776-2
Top View
Order Number DS1488M or DS1488N
See NS Package Number M14A or N14A
© 1999 National Semiconductor Corporation
DS005776
www.national.com
DS1488 Quad Line Driver
July 1999
Absolute Maximum Ratings (Note 2)
Operating Temperature Range
0˚C to +75˚C
Storage Temperature Range
−65˚C to +150˚C
Maximum Power Dissipation (Note 1) at 25˚C
Molded DIP Package
1280 mW
SO Package
974 mW
Lead Temperature (Soldering, 4
sec.)
260˚C
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage
V+
V−
Input Voltage (VIN)
+15V
−15V
−15V ≤ VIN ≤
7.0V
± 15V
Output Voltage
Note 1: Derate molded DIP package 10.2 mW/˚C above 25˚C; derate SO
package 7.8 mW/˚C above 25˚C.
Electrical Characteristics (Notes 3, 4)
VCC+ = 9V, VCC− = −9V unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
−0.8
−1.3
mA
0.005
10.0
µA
IIL
Logical “0” Input Current
IIH
Logical “1” Input Current
VOH
High Level Output Voltage
VIN = 0V
VIN = +5.0V
RL = 3.0 kΩ,
Low Level Output Voltage
VIN = 0.8V
RL = 3.0 kΩ,
−6.0
7.0
V
−9.0
−10.6
V
High Level Output
VIN = 1.9V
V+ = 13.2V, V− = −13.2V
VOUT = 0V, VIN = 0.8V
−6.0
−10.0
−12.0
mA
VOUT = 0V, VIN = 1.9V
6.0
10.0
12.0
mA
V+ = V− = 0V, VOUT = ± 2V
VIN = 1.9V
V+ = 9.0V, V− = −9.0V
V+ = 12V, V− = −12V
300
11.6
20.0
mA
15.7
25.0
mA
19.4
34.0
mA
3.4
6.0
mA
4.1
7.0
mA
VOL
IOS+
V+ = 9.0V, V− = −9.0V
V+ = 13.2V, V− = −13.2V
V+ = 9.0V, V− = −9.0V
6.0
7.1
V
9.0
10.7
V
Short-Circuit Current
IOS−
Low Level Output
Short-Circuit Current
ROUT
Output Resistance
ICC+
Positive Supply Current
(Output Open)
VIN = 0.8V
ICC−
Negative Supply Current
VIN = 1.9V
V+ = 15V, V− = −15V
V+ = 9.0V, V− = −9.0V
V+ = 12V, V− = −12V
VIN = 0.8V
V+ = 15V, V− = −15V
V+ = 9.0V, V− = −9.0V
V+ = 12V, V− = −12V
(Output Open)
Pd
Power Dissipation
V+ = 15V, V− = −15V
V+ = 9.0V, V− = −9.0V
V+ = 12V, V− = −12V
V+ = 15V, V− = −15V
V+ = 9.0V, V− = −9.0V
V+ = 12V, V− = −12V
Ω
9.1
12.0
mA
−10.8
−17.0
mA
−14.6
−23.0
mA
−18.3
−34.0
mA
−0.001
−0.100
mA
−0.001
−0.100
mA
−0.01
−2.5
mA
252
333
mW
444
576
mW
Switching Characteristics
(VCC = 9V, VEE = −9V, TA = 25˚C)
Symbol
Parameter
tpd1
Propagation Delay to a Logical “1”
tpd0
Propagation Delay to a Logical “0”
tr
Rise Time
tf
Fall Time
Conditions
RL = 3.0 kΩ, CL = 15 pF, TA = 25˚C
RL = 3.0 kΩ, CL = 15 pF, TA = 25˚C
RL = 3.0 kΩ, CL = 15 pF, TA = 25˚C
RL = 3.0 kΩ, CL = 15 pF, TA = 25˚C
Min
Typ
Max
Units
187
350
ns
45
175
ns
63
100
ns
33
75
ns
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they
are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.
Note 3: Unless otherwise specified min/max limits apply across the 0˚C to +75˚C temperature range for the DS1488.
Note 4: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown
as max or min on absolute value basis.
www.national.com
2
RS-232C specifies that the output slew rate must not exceed 30V per microsecond. Using the worst case output
short circuit current of 12 mA in the above equation, calculations result in a required capacitor of 400 pF connected
to each output.
See Typical Performance Characteristics.
Applications
By connecting a capacitor to each driver output the slew
rate can be controlled utilizing the output current limiting
characteristics of the DS1488. For a set slew rate the appropriate capacitor value may be calculated using the following relationship
C = ISC (∆T/∆V)
where C is the required capacitor, ISC is the short circuit
current value, and ∆V/∆T is the slew rate.
Typical Applications
RS-232C Data Transmission
DS005776-3
Note 5: Optional for noise filtering
DTL/TTL-to-MOS Translator
DTL/TTL-to-HTL Translator
DS005776-5
DS005776-4
DTL/TTL-to-RTL Translator
DS005776-6
3
www.national.com
AC Load Circuit and Switching Time Waveforms
DS005776-7
*CL includes probe and jig capacitance.
DS005776-8
tr and tf are measured between 10%
and 90% of the output waveform.
Typical Performance Characteristics
TA = +25˚C unless otherwise noted
DS005776-9
FIGURE 1. Transfer Characteristics
vs Power Supply Voltage
DS005776-10
FIGURE 2. Short-Circuit Output
Current vs Temperature
DS005776-11
DS005776-12
FIGURE 3. Output Slew Rate vs
Load Capacitance
www.national.com
FIGURE 4. Output Voltage and
Current-Limiting Characteristics
4
Physical Dimensions
inches (millimeters) unless otherwise noted
SO Package (M)
Order Number DS1488M
NS Package Number M14A
Molded Dual-In-Line Package (N)
Order Number DS1488N
NS Package Number N14A
5
www.national.com
DS1488 Quad Line Driver
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.