NSC DS3692

DS1692/DS3692
TRI-STATE ® Differential Line Drivers
General Description
The DS1692/DS3692 are low power Schottky TTL line drivers electrically similar to the DS1691A/DS3691 but tested to
meet the requirements of MIL-STD-188-114A (see Application Note AN-216). MIL-STD-188-114A type 1 driver specifications can be met by adding an external three resistor voltage divider to the output of the DS3692/1692. The DS3692/
1692 feature 4 buffered outputs with high source and sink
current capability with internal short circuit protection.
With the mode select pin low, the DS1692/DS3692 are dual
differential line drivers with TRI-STATE outputs. They feature
± 10V output common-mode range in TRI-STATE and 0V
output unbalance when operated with ± 5V supply.
Multipoint applications in differential mode with waveshaping
capacitors is not allowed.
Features
n Short circuit protection for both source and sink outputs
n 100Ω transmission line drive capability
n Low ICC and IEE power consumption: Differential
mode: ICC = 9 mA/driver typ, IEE = 5 mA/driver typ
n Low current PNP inputs compatible with TTL, MOS and
CMOS
n Adaptable as MIL-STD-188-114A type 1 driver
Logic Diagram (1⁄2 Circuit Shown)
DS005784-1
Connection Diagram
Inputs
Outputs
Mode
A (D)
Disable1 (2)
A (D)
B (C)
0
0
0
0
1
0
0
1
0
1
0
0
1
1
TRI-STATE TRI-STATE
1
0
TRI-STATE TRI-STATE
DS005784-2
*Contact Product Marketing for availability.
Top View
Order Number DS1692J, DS3692J,
DS3692M or DS3692N
See NS Package Number J16A, M16A* or N16A
TRI-STATE ® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation
DS005784
www.national.com
DS1692/DS3692 TRI-STATE Differential Line Drivers
March 1992
Absolute Maximum Ratings (Note 2)
Operating Conditions
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage
DS1692
VCC
VEE
DS3692
VCC
VEE
Temperature (TA)
DS1692
DS3692
Supply Voltage
7V
VCC
−7V
VEE
Maximum Power Dissipation (Note 1) at 25˚C
Cavity Package
1509 mW
Molded Package
1476 mW
Input Voltage
15V
± 15V
Output Voltage (Power OFF)
Storage Temperature
−65˚C to +150˚C
Lead Temperature (Soldering, 4 sec.)
260˚C
Min
Max
Units
4.5
−4.5
5.5
−5.5
V
V
4.75
−4.75
5.25
−5.25
V
V
−55
0
+125
+70
˚C
˚C
Note 1: Derate cavity package 10.1 mW/˚C; derate molded package 11.9
mW/˚C above 25˚C.
Electrical Characteristics
DS1692/DS3692 (Notes 3, 4, 5)
Symbol
Parameter
Conditions
Min
Typ
Max
DS1692, VCC = 5V ± 10%, DS3692, VCC = 5V ± 5%, VEE CONNECTION TO GROUND, MODE SELECT ≤ 0.8V
VO
Differential Output Voltage
RL = ∞
VIN = 2V
2.5
3.6
VO
VA,B
VIN = 0.8V
−2.5
−3.6
VT
Differential Output Voltage
RL = 100Ω
VIN = 2V
2
2.6
VT
VOS, VOS
VA,B
Common-Mode Offset
VCC ≥ 4.75V
RL = 100Ω
VIN = 0.8V
−2
−2.6
Units
V
V
V
V
2.5
3
V
RL = 100Ω
0.05
0.4
V
RL = 100Ω
0.05
0.4
V
−0.002
−0.15
mA
0.002
0.15
mA
80
150
mA
−80
−150
mA
−80
−150
mA
80
150
mA
Supply Current
18
30
DS1692, VCC = 5V ± 10%, VEE = −5V ± 10%, DS3692, VCC = 5V ± 5%, VEE = −5 ± 5%, MODE SELECT ≤ 0.8V
VO
Differential Output Voltage
RL = ∞
VIN = 2.4V
7
8.5
VO
VA,B
VIN = 0.4V
−7
−8.5
VT
Differential Output Voltage
RL = 200Ω
VIN = 2.4V
6
7.3
VT
VA,B
VIN = 0.4V
−6
−7.3
mA
Voltage
|VT| − |VT |
Difference in Differential
Output Voltage
|VOS| − |VOS |
Difference in CommonMode Offset Voltage
VSS
|VT − VT |
RL = 100Ω, VCC ≥ 4.75V
IOX
TRI-STATE Output Current
VO ≤ −10V
ISA
Output Short Circuit Current
VO ≥ 15V
VIN = 0.4V
ISB
Output Short Circuit Current
VIN = 2.4V
VOA = 6V
VOB = 0V
VOA = 0V
VOB = 6V
4.0
4.8
V
ICC
|VT| − |VT |
Output Unbalance
IOX
TRI-STATE Output Current
|VCC| = |VEE|, RL = 200Ω
VO = 10V
IS+
Output Short Circuit Current
VO = 0V
IS−
ISLEW
Slew Control Current
ICC
Positive Supply Current
IEE
Negative Supply Current
www.national.com
V
V
0.02
0.4
V
0.002
0.15
mA
VO = −10V
VIN = 2.4V
−0.002
−0.15
mA
−80
−150
mA
VIN = 0.4V
80
150
mA
18
30
mA
−10
−22
mA
± 140
VIN = 0.4V, RL = ∞
VIN = 0.4V, RL = ∞
2
V
V
µA
Electrical Characteristics
VEE ≤ 0V (Notes 3, 4)
Symbol
Parameter
Conditions
Min
Typ
Max
Units
VIH
High Level Input Voltage
2
VIL
Low Level Input Voltage
IIH
High Level Input Current
VIN = 2.4V
1
100
µA
Low Level Input Current
VIN ≤ 15V
VIN = 0.4V
10
IIL
−30
−200
µA
VI
Input Clamp Voltage
IXA
Output Leakage Current
IXB
Power OFF
IIN = −12 mA
VCC = VEE = 0V
VO = 15V
VO = −15V
V
0.8
V
40
µA
−1.5
V
0.01
0.15
mA
−0.01
−0.15
mA
Switching Characteristics
TA = 25˚C
Symbol
Parameter
VCC = 5V, MODE SELECT = 0.8V
tr
Differential Output Rise Time
tf
Differential Output Fall Time
tPDH
Output Propagation Delay
tPDL
Output Propagation Delay
tPZL
TRI-STATE Delay
tPZH
TRI-STATE Delay
tPLZ
TRI-STATE Delay
tPHZ
VCC
TRI-STATE Delay
= 5V, VEE = −5V, MODE SELECT = 0.8V
tr
Differential Output Rise Time
tf
Differential Output Fall Time
tPDL
Output Propagation Delay
tPDH
Output Propagation Delay
tPZL
TRI-STATE Delay
tPZH
TRI-STATE Delay
tPLZ
TRI-STATE Delay
tPHZ
TRI-STATE Delay
Conditions
Min
Typ
Max
Units
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
(Figure 1)
120
200
ns
(Figure 1)
120
200
ns
(Figure 1)
120
200
ns
(Figure 1)
120
200
ns
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
RL = 100Ω, CL = 500 pF
(Figure 2)
180
250
ns
(Figure 2)
180
250
ns
(Figure 2)
80
150
ns
(Figure 2)
80
150
ns
500 pF (Figure 1)
190
300
ns
500 pF (Figure 1)
190
300
ns
500 pF (Figure 1)
190
300
ns
500 pF (Figure 1)
190
300
ns
2)
180
250
ns
2)
180
250
ns
2)
80
150
ns
2)
80
150
ns
RL = 200Ω, CL =
RL = 200Ω, CL =
RL = 200Ω, CL =
RL = 200Ω, CL =
RL = 200Ω, CL = 500 pF (Figure
RL = 200Ω, CL = 500 pF (Figure
RL = 200Ω, CL = 500 pF (Figure
RL = 200Ω, CL = 500 pF (Figure
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The table of “Electrical Characteristics” provide conditions for actual device operation.
Note 3: Unless otherwise specified, min/max limits apply across the −55˚C to +125˚C temperature range for the DS1692 and across the 0˚C to +70˚C range for the
DS3692. All typicals are given for VCC = 5V and TA = 25˚C. VCC and VEE as listed in operating conditions.
Note 4: All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to ground unless otherwise specified.
Note 5: Only one output at a time should be shorted.
3
www.national.com
AC Test Circuits and Switching Time Waveforms
DS005784-4
DS005784-3
FIGURE 1. Differential Connection
DS005784-5
DS005784-6
FIGURE 2. TRI-STATE Delays for DS1692/DS3692
Switching Waveforms
DS005784-7
DS005784-8
www.national.com
4
Physical Dimensions
inches (millimeters) unless otherwise noted
Ceramic Dual-In-Line Package (J)
Order Number DS1692J, DS3692J
NS Package Number J16A
Small Outline Package (M)
Order Number DS3692M
NS Package Number M16A
5
www.national.com
DS1692/DS3692 TRI-STATE Differential Line Drivers
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
Molded Dual-In-Line Package (N)
Order Number DS3692N
NS Package Number N16A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.