PW118 ITE 10-19 WATT SERIES PW118 SWITCH-MODE P O W E R S U P P LY PW118 Ault Part No. Voltage DC Max Amps Max Watts • 100-250 VAC Universal Input PW118XA0303_01 3V 3.34 10.0 • Desktop Style or Wallplug Style PW118XA0503_01 5V 3.00 15.0 • Single Output to 19W PW118XA0903_01 9V 2.00 18.0 • Regulated Output With Low Ripple PW118XA1203_01 12V 1.50 18.0 • Meets Safety Agency Requirements PW118XA1503_01 15V 1.20 18.0 • Complies With EMI/RFI Regulations PW118XA1803_01 18V 1.00 18.0 CE Compliant PW118XA2403_01 24V 0.75 18.0 • PW118XA4803_01 48V 0.40 19.0 • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 1 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key PW118 X A 05 03 __ 01 Product Family Name Design Revision Changes Voltage DC Connector Input Configuration/ Model Type (see pg. 2) Denotes standard or custom requirements Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc. PW118 ITE 10-19 WATT SERIES Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching-fixed frequency flyback Line Frequency 47 - 63 Hz Leakage Current Less than 750 uA Current 0.5A max at 90 VAC input Efficiency Minimum 65% Protection Internal primary current fuse, Inrush limiting EMI Complies with EMC Directives CE CE Compliant MTBF 100,000 Calculated Hours Output Combined Line and Load Voltage Regulation ±1% excluding cord Ripple 1% V p-p max for output current of >0.175A Transient Response 0.5 msec. for 50% load change typical Holdup Time 18 msec min. @ 120 VAC 60 msec min. @ 240 VAC Protection Cord and Connector Environmental Operating Temperature 0º to 40º C with no derating Storage Temperature -30º to +85º C Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Foldback overcurrent protection Short circuit protection Cooling Convectional - non vented case 6 ft, 2 conductor, 18 AWG, Ault #3 connector. Other connectors are also available. Mechanical Safety Approvals Agency Listings cULus 60950, TUV/IEC EN60950, Japanese certification available – extra fees apply IEC320 w/o ground C18 (Q) 3.74L x 2.13W x 1.26H (in) 95.0L x 54.0W x 32.0H (mm) Case Material 94V0 polycarbonate; black is standard color; other colors available - extra charges may apply Weight 7 ounces, 198 grams Connector Input Configuration IEC320 w/ground C14 (F) Case and Dimensions N. America/ Japan (B) Europe (M) United Kingdom (G) Shaver C8 (N) Inlet type: IEC320-C14, C8 Plug type: NA, EURO, UK, SAA Pinout Code Center contact: positive Specify the Input Configuration Code in your order. Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc.