SP689 Ultra High Voltage Start Up DESCRIPTION The SP689 is a low cost version ultra high voltage start up IC. This IC is ideal to use in conjunction with any PWM to further reduce the standby power. By using SP689, it can eliminate the need for startup resistors and bleeder resistors in switching mode power supply design. It would provide the users a superior AC/DC power application with higher efficiency and lower standby power. With low external component counts, SP689 is a low cost solution for the applications. SP689 is available in SOT-23-5L package. APPLICATIONS AC/DC Switching Power Adaptor Battery Charger Open-Frame Switching Power Supply LED Power Supply FEATURES 700V CDMOS Process Auto Re-Start X2 Capacitor Discharge PIN CONFIGURATION SOT-23-5L SOT-23-5L Package PART MARKING SOT-23-5L 2013/12/12 V.1 Page 1 SP689 Ultra High Voltage Start Up TYPICAL APPLCATION CIRCUIT PIN DESCRIPTION Pin Symbol Description 1 SENSE Sense External Signal to Switch off HV MOSFET 2 GND Ground 3 GND Ground 4 VCC Supply Voltage In 5 HV Ultra High Voltage BLOCK DIAGRAM 2013/12/12 V.1 Page 2 SP689 Ultra High Voltage Start Up ORDERING INFORMATION Part Number Package Part Marking SP689S25RGB SOT-23-5L ※ SP689S25RGB : Tape Reel ; Pb – Free ; Halogen-Free SP689 ABSOULTE MAXIMUM RATINGS (TA=25℃, unless otherwise specified.) The following ratings designate persistent limits beyond which damage to the device may occur. Symbol Parameter VHV HV Voltage VCC / SENSE VCC / SENSE Voltage PD Power Dissipation @ TA=85℃ (*) Human Body Model ESD Machine Model TJ Operating Junction Temperature Range TSTG Storage Temperature Range RӨJC Thermal Resistance Junction – Case (*) Value -0.3~700 -0.3 ~ 40 0.3 4 300 -40 ~ 150 -40 ~ 150 210 SOT-23-5L Unit V V W KV V ℃ ℃ ℃/W (*) The power dissipation and thermal resistance are evaluated under copper board mounted with free air conditions. ELECTRICAL CHARACTERISTICS (TA=25℃, VHV=30V, unless otherwise specified.) Symbol VHV Istartup Parameter HV Voltage Start Up Current IC HV Current Source VRS Iq Re-start Voltage Quiescent Current Sense Voltage High Sense Voltage Low VSENSE HI VSENSE LO 2013/12/12 V.1 Conditions Min. 650 VHV = 30V VHV = 30V, VCC = 0V VHV = 30V, VCC = 10V VHV = 30V, VCC = 12V VHV = 30V, VCC = 16V VHV = 30V, VHV = 30V, VCC = 16V Typ. Max. 100 4.5 2 1.6 1 6.5 115 140 5.0 2.5 2.0 1.2 150 3.0 0.7 Unit V uA mA mA mA mA V uA V V Page 3 SP689 Ultra High Voltage Start Up SOT-23-5L PACKAGE OUTLINE 2013/12/12 V.1 Page 4 SP689 Ultra High Voltage Start Up Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties that may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. ©The SYNC Power logo is a registered trademark of SYNC Power Corporation ©2013 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 http://www.syncpower.com 2013/12/12 V.1 Page 5