Model www.teltron.com TMS200 X-Band Motion Sensor Applications Features TMS200 is X-band Doppler motion sensor to detect motion. It consists of DR(dielectric resonator) oscillator, passive diode and patch antennas and provides most reliable solution in motion detection. Intrusion alarm Automatic door Obstruction alarm system Velocity measurement Automatic light control-energy saving System air-conditioner-zone control Antenna beam pattern H-axis Picture E-axis E-axis H-axis Electrical Specifications Parameters Min. Typ. 10,525±12.5 Frequency Output Power (EIRP) Power Supply Current Consumption CW Unit Condition Over Temp. 15 4.75 5 5.25 60 30 CW Settling time 6 Noise 10 3~80 Hz Received Signal 20 max 3dB Antenna Beam Width - E-axis 67 3dB Antenna Beam Width - H-axis 54 Operating temp. -20 +55 Storage temp. -30 +70 Size Pulse Operation Max. 45 x 40 x 10 Pulse Width 5 Duty Cycle 1 Average Current 2 Warning : The specifications can be changed without any notice. 202 ITplex 26-41 Gajeongbuk-ro, Yuseong-gu, Daejeon 305-343 Korea TEL : +82-42-360-2000 FAX : +82-360-2010 e-mail : [email protected] @5% duty Model TMS200 www.teltron.com X-Band Motion Sensor Pin Description Dimension Side view Front view Application Circuit Example # Pin Name Explanation 1 VDD Power, +5V 2 IF Output 3 GND Ground 4 GND Ground (㎜) Block Diagram TMS200 Tx Rx Osc. Mixer IF Warning : To avoid a fatal damage, it should be carefully handled and installed under ESD protection condition. 202 ITplex 26-41 Gajeongbuk-ro, Yuseong-gu, Daejeon 305-343 Korea TEL : +82-42-360-2000 FAX : +82-360-2010 e-mail : [email protected]