TTL/CMOS Crystal Oscillator Fixed Frequency Crystal Oscillator • Industry standard pinout TTL and CMOS compatible output Tri-state output option Frequency up to 100 MHz Low power Hermetically sealed metal package • • • • • PO300F Specifications: Frequency Range: Full-Size DIL-14 1.0 MHz ~ 100.0 MHz Operating Temperature: 0°C ~ +50°C -A -10°C ~ +60°C -B -20°C ~ +70°C -C -40°C ~ +85°C -L Storage Temperature: -40°C ~ +85°C Frequency Stability: ± 100 ppm ± 50 ppm Standard ± 25 ppm Supply Voltage: 3.3 VDC 5.0 VDC Supply Current -P 10 ~ 45 mA Output Level: Output High: 2.4V min (TTL), 90% VDD min (CMOS) Output Low: 0.4V max (TTL), 10% VDD max (CMOS) Pin Transition Times (1MHz ~ 25MHz) Rise & Fall Time 5V(3.3V): 8(5) nS Over 25MHz Rise & Fall Time 5V(3.3V): Configurations 1 NC or E/D 7 Ground 8 Output 14 Supply 6(4) nS Symmetry or Duty Cycle: 45/55% Start-Up Time: 10 mS max Tri-State: - T or None Output Active: 0.8VDD Output in High-Impedance State: 0.16VDD All dimensions are in mm Ordering Information Product name + Operating Temperature + Stability(PPM) + Frequency + Other Specification Code. i.e. PO300FC25-40.0MHz Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. Phone: +86 10 6301 4184 © 2004 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 Email: [email protected] Web: http://www.vanlong.com PO300F