8 D 5 6 7 4 2 3 NOTES: MOUNTING: Mounts in a .312 .002 [ 7.92mm .05] panel hole on .500 [12.7mm] centers. 1. Panel thickness .031 [.8mm] to .125 [3.18mm]. Panel hole should be deburred, but not chamfered. 2. ASSEMBLY: Insert lens through panel hole, slide lock washer onto lens barrel and twist on retaining ring. PCB mounted LEDs slide into lens when the panel cover is closed or the PCB card is inserted into the case. 3. MATERIAL: Lens-Polycarbonate, UL 94-V2 Lock Washer- FH Steel, Nickel plate Retaining ring - Thermoplastic, U.L. 94 V0 Rated 4. U.S. & Foreign Pat. Issued & Pend. ECN# 1 REV. REVISIONS DESCRIPTION 001 REVISED PER ECR111009AZ01 DATE INITIALS 4-23-10 SMU D LOCK WASHER .430 10.92mm RETAINING RING C C .307 7.8mm .432 10.97mm .430 10.93mm .344 8.74mm B .330 8.38mm ORDERING CODE : .016 0.41mm DISPLAY PANEL RTP ATP GTP BTP YTP CTP LENS COLOR RED TRANSPARENT AMBER TRANSPARENT GREEN TRANSPARENT BLUE TRANSPARENT YELLOW TRANSPARENT CLEAR TRANSPARENT LOCK WASHER .370 9.4mm LED UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH 7 MATERIAL VISUAL COMMUNICATIONS COMPANY, INC. SEE NOTES DECIMALS .X .020 .010 .XX .XXX .005 BREAK ALL CORNERS AND SHARP EDGES .030 MAX 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] FINISH TITLE: SEE NOTES LENS RETAINING RING THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 6 5 4 3 DRAWN: CHECKED: 5MM ROUND STANDARD THREADED FRESNEL LENS DATE APPROVAL PCB ASSEMBLY 8 .150 3.81mm CMC 441 XXX MODEL A B .034±.003 0.86mm±0.08 .295 7.49mm SMU 4-23-10 DZ 4-23-10 SIZE SCALE: 4:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B CMC 441 XXX 001 SHEET 1 OF 1 1 A