RL101F WILLAS THRU 0.1AM RL107F FAST RECOVERY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere Pb Free Product FEATURES FEATURES * Extremely Low VF * Extremely thin package * Low stored charge * Majority carrier conduction A-405 .100 (2.55) Fast switching Low leakage Low forward voltage drop High current capability High currenf surge High reliability .112 (2.85) * * * * * * MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram .059 (1. MECHANICAL DATA .043 (1. * Case:Molded plastic, JEDEC SOD-323(SC-76) * Pb free plating * Terminal : Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity : Indicated by cathode band MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS * Mounting Ratings at 25 o C ambient temperature unless otherwise specified. Position : Any Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. * Weight : 0.000159 ounce, 0.0045 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) SYMBOL RL101F RL102F RL103F RL104F RL105F RL106F RL107F UNITS MAXIMUM RATING AND ELECTRICAL CH VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts Rating 25VoDC C ambient temperature unless otherwise specified. I O half wave, 60Hz, resistive of 1.0 inductive load. Single phase For capacitive load, derate current by 20% Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range I FSM 30 CJ 15 Parameter T J , T STG Volts Amps Amps pF Conditions 0 -65 to + 150 C Repetitive Peak Reverse Voltage ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) Continuous CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Full Cycle Average, .375” (9.5mm) lead length at T L = 55 oC Maximum Reverse Recovery Time (Note 1) Reverse Voltage SYMBOL VF Forward Voltage RL101F RL102F RL103F RL104F RL105F RL106F RL107F UNITS I = 10mA DC 1.3 F Volts 5.0I F = IR Reverse Current Mean Rectifying Current trr NOTES : 1. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A Peak 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 100mA DC uAmps V 100 R = 10V DC 150 250 uAmps 500 nSec forward surge current Capacitance between terminals Operating Temperature Storage Temperature Back WILLAS ELECTRONIC CORP.