R1200F WILLAS THRU R2000F HIGH VOLTAGE FAST RECOVERY RECTIFIER SCS501V VOLTAGE RANGE 1200 to 2000 Volts CURRENT 0.2 to 0.5 Ampere VOLTAGE 40V 0.1AMP Schottky Barrier Rectifiers FEATURES *Fast switching *Low leakage *High current capability *High surge capability *High reliability DO-41 Pb Free Product TURES MECHANICAL DATA SOD-323(SC-76) .012 (0.3) .076 (1.95) .100 (2.55) .112 (2.85) carrier conduction Cathode Band .065 (1.65) * Case: Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed y thin package * Mounting position: Any ed charge * Weight: 0.35 gram y Low VF Top View Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .043 (1.1) ded plastic, JEDEC SOD-323(SC-76) : Solder plated, solderable per MIL-STD-750, .006 (0.15) max. For capacitive HANICAL DATAload, derate current by 20%. .059 (1.5) .004 (0.1) max. Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .049 (1.25) max. o Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At TA = 25 C unless otherwise noted) Method 2026 Indicated by cathode band RATINGS Maximum Recurrent Peak Reverse Voltage Position : Any Maximum RMS Volts Maximum DC Blocking Voltage 0.000159 ounce, 0.0045 gram Maximum Average Forward Rectified Current at T A = 50 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range SYMBOL R1200F R1500F R1800F R2000F UNITS VRRM 1200 1500 1800 2000 Volts VRMS 840 1050 .010 1260 Volts VDC 1200 1500 1800 (0.25) 1400 min. 2000 Volts IO 500or 4 Marking Code: JV 200 I FSM 30 T J , T STG -65 to + 175 mAmps Amps 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) IMUM RATING AND ELECTRICAL CHARACTERISTICS CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.5A/0.2A DC C ambient temperature unlessCurrent otherwise specified. Maximum DC Reverse at Rated DCresistive Blocking Voltage TA = 25oCload. se half wave, 60Hz, of inductive SYMBOL R1200F R1500F .375”, (9.5mm) lead length at TL = 55 C Parameter NOTES : Conditions Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A R2000F 4.0 Volts 5.0 uAmps trr 100 uAmps 500 Symbol Min. Typ. nSec Max. Unit Peak Reverse Voltage VRM 45 V s Reverse Voltage VR 40 V I F = 10mA DC VF1 0.34 V I F = 100mA DC VF2 0.55 V oltage UNITS IR Maximum Full Load Reverse Current Average, Full Cycle tive load, derate current by 20% o Maximum Reverse Recovery Time (Note) R1800F 2.5 VF Back WILLAS ELECTRONIC CORP.