Pomona ® Model 6246 Minigrabber® Test Clip Patch Cord – IEC 1010 Compliant FEATURES: • Newly designed Minigrabber® Test Clip Patch Cord offers a high 300 Volt and 5 amp rating. • Grabber width is a slim .36” (9,14 mm) for easier access to test terminals. • Grabber hook is gold plated Beryllium Copper to ensure signal integrity & attaches onto component leads up to .060” (1,5 mm) O.D. • High strand count silicone insulated wire offers excellent flexibility and high temperature resistance. MATERIALS: Grabber: Body: Nylon – Fire Retardant Hook: Beryllium Copper, Gold Plated, Compression Spring: Music Wire Wire: 18 AWG, 65 x 36 t.c., Insulation – Silicone, .144” (3,66 mm) O.D., Color per Part Number RATINGS: IEC 1010 2-031 Operating Voltage: 300 V, CAT II, P2 Current: 5 Amperes Max. ORDERING INFORMATION: Model 6246-XX-* XX = Length in Inches, Standard Lengths: 12” (305), 24” (610), 36” (914), 48” (1219), 60” (1524) * = Color Code, -0 Black and –2 Red Additional lengths can be quoted upon request. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d6246_1_01.doc PomonaACCESS 90477 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1