Model 6249 Minigrabber® Test Clip to Multi-Stacking Banana Plug Test Lead Features • • • • • • • • Newly designed Minigrabber® Test Clip Patch Cord offers a high 300 Volt and 5 amp rating. Grabber width is a slim .36” (9,14 mm) for easier access to test terminals. Grabber hook is gold plated Beryllium Copper to ensure signal integrity & attaches onto component leads up to .060” (1,5 mm) O.D. Grabber patch cord interfaces directly into the most popular multimeters configured with non-sheathed style banana jacks, including Amprobe, Fluke, H-P, Tektronix and Wavetek. Plug is molded directly to the cable in an integral one-piece design for a long lasting connection. Multi-leaf banana spring material is nickel-plated Beryllium Copper for extended insertion life & low contact resistance. Banana plug features top and side stacking for added test versatility. High strand count silicone insulated wire offers excellent flexibility and high temperature resistance. Materials Grabber: Body – Polypropylene Hook – Beryllium Copper, Gold Plated, Compression Spring: Music Wire Wire: 18 AWG, 65 x 36 t.c., Insulation – Silicone, .144” (3,66 mm) O.D., Color per part number. Banana Plug: Body – Brass, Nickel Plated, Spring – Beryllium Copper, Nickel Plated Insulation – Polypropylene, Color per part number Ratings IEC 1010 2-031 Operating Voltage: Operating Current: For CE Compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use: 300 Vrms. Do not use on circuits where transient stresses can exceed the rated voltage. 5 Amperes Max. Ordering Information Model: 6249-XX-* XX = Wire Length, Standard Lengths: 12” (30,48 cm), 24” (61 cm), 48” (122 cm) * = Color: -0 Black, -2 Red Ordering Example: 6249-48-2, Patch Cord is 48” (122 cm), Color is Red. Additional lengths can be quoted upon request. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1094498 Rev. 100 Page 1 of 1