3M™ Active Optical Pluggable Transceiver for QSFP+ Applications Using industry leading VCSEL technology and an advanced new light-engine design, the 3M Active Optical Pluggable Transceiver provides exceptional cost/performance value. The QSFP+ Pluggable Transceiver delivers 4 channels of bi-directional data at up to 10.5 Gbps per channel for a total aggregate bandwidth of over 40 Gbps while using a subtle 750mW of power per end. Key Features • • • • • • • • • • • Low power consumption IBTA certified Designed to SFF 8436 QSFP+ Supports 40GBASE-SR4 and nPPI specifications per IEEE 802.3ba-2010 D3.2 4 Channel x 10.3125 Gbps with 64B/66B Reliable 850nm VCSEL Serial I2C interface for user diagnostics Optical lengths up to 100m using OM3 Hot pluggable Industry standard MTP/MPO optical interface 3M Active Optical 2-year warranty Regulatory • • • • FDA CDRH - Laser Class 1M per IEC 60825-1 FCC part 15, class B and CE emissions & immunity RoHS compliant ESD: – HBM 2000V (JESD22-A114-B) – Air Discharge 15kV (EN610004-2) – Contact Discharge 8kV(EN610004-2) Applications • High-Performance Computing Clusters • Data Center Networks • IB & GbE Switches • High-Speed Servers •Storage • Routers, Hubs, Load Balancer 3M™ Active Optical Pluggable Transceiver for QSFP+ Applications Product Specifications Module Form Factor QSFP+ Protocols Supported InfiniBand QDR,DDR, SDR & 40G Ethernet 4 channels, bi-directional 2 Up to 10.5 Gbps/channel Channel Data Rate Operating Optical Wavelength eiver For QSFP+ Applications m 1 NOTES: 1. RoHS COMPLIANT. SEE REGULATORY INFORMATION APPENDIX IN "RoHS COMPLIANCE" SECTION AT www.3Mconnectors.com (E1 & C1 APPLY) 850nm BER <10E-12 Operating Case Temperature 0 to +70º deg C +0.15 Storage Temperature 71.1 -0.05 2. MEET SPECIFICATION SFF-8436 UNLESS OTHERWISE NOTED, REFERENCES TO INDUSTRY SPECIFICATIONS ARE INTENDED TO INDICATE SUBSTANTIAL COMPLIANCE TO THE MATERIAL ELEMENTS OF THE SPECIFICATION. SUCH REFERENCES SHOULD NOT BE CONSTRUED AS A GUARANTEE OF COMPLIANCE TO ALL 1 REQUIREMENTS IN A GIVEN SPECIFICATION. " -20 to +85º deg C Supply Voltage 3.3V Electrical Interface 38-pin edge connector 4 3 Power Consumption 1.5W max Management Interface Serial, I2C Optical Interface 8 or 12F - MTP/MPO 3M TMActive Optical Pluggable Transceiver For QSFP+ Applications Visit http://www.3Mconnectors.com D 2 1.10±0.18 (2X) NOTES: 3. MATERIAL: 1. RoHS COMPLIANT. SEE REGULATORY INFORMATION HOUSEING: ZINC ALLOY APPENDIX IN "RoHS COMPLIANCE" SECTION AT FINISHING: NICKEL www.3Mconnectors.com (E1 & C1PLATING APPLY) 2. MEET SPECIFICATION SFF-8436 4. ORDERING INFORMATION: UNLESS OTHERWISE NOTED, REFERENCES TO INDUSTRY SPECIFICATIONS ARE INTENDED TO INDICATE SUBSTANTIAL COMPLIANCE TO THE MATERIAL ELEMENTS OF THE SPECIFICATION. SUCH REFERENCES SHOULD NOT BE 6B=Pluggable CONSTRUED AS A GUARANTEETransceiver OF COMPLIANCE TO ALL REQUIREMENTS IN A GIVEN SPECIFICATION." 2=QSFP+ +0.15 71.1 -0.05 Ordering Information 1.10±0.18 (2X) D 6B 2 A - 04 1 2 A - 0 C HOUSEING: ZINC ALLOY 04=4 channels FINISHING: NICKEL PLATING Please reference this drawing for additional details and availability. 5.20 0.60 1.00 18.35 16.40 13.68 8.50 12.53 0 DRAWING NUMBER 04 1 2 A - A A- REVISION 6B 2 A=MPO Optical Interface 0=Placeholder 6B=Pluggable Transceiver 2=QSFP+ A=10G 04=4 channels 1=850nm optical wavelength 2=Multi Mode A=MPO Optical Interface 0=Placeholder C DRAWING NUMBER C 1=850nm optical wavelength 2=Multi Mode 4. ORDERING INFORMATION: 8.50 Part Number: 6B2A-0412A-0 78-5100-2570-9 QSFP+ Pluggable Transceiver parts are available on customer drawing 78-5100-2570-9. A=10G 1.00 3. MATERIAL: 78-5100-2570-9 12.53 D A 3 REVISION Channels 5.20 0.60 18.35 16.40 13.68 B B B FREE ROTATION 90° AFTER ASSEMBLY AFTER ASSEMBLY 1 A 004511 DESIGN REFERENCE NEXT ASSEMBLY DISTRIBUTION REV ECO DRFT CODES DESIGN REFERENCE NEXT ASSEMBLYOH KIM CHYE DISTRIBUTION CODES DIVISION QIAO YUN LONG DATE MFG DATE APPVL DRFT MAY 17,2013 YL DRFT CHKD MAY 17,2013 OKC YL DRFT CHKD DATE ISSUE DATE AND DESCRIPTION SAUJIT BANDHU DATE DATE MAY 17,2013 MFG DATE OH KIM CHYE MAY 17,2013 Unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. Such DO NOT QIAO YUN LONG SAUJIT BANDHU MAY 17,2013 MAY 17,2013 2 SCALE A references should not be construed as a guarantee of compliance to all requirements in a DRAWING given specification. 3M COPYRIGHT 2013 1 DIVISION CODE ESD A OKC MAY 17,2013 DATE AND DESCRIPTION 004511 1 AISSUE REV MAY 17,2013 ECO CHKD 3M Center ESD DO NOT SCALE DRAWING INTERPRET PER 2 1 St. Paul, MN 55144 C 3M COPYRIGHT 2013 This document and the information it contains are DATE or further 3M property and may not be reproduced distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE INCHES .0 ± SCALE.00 ± .000 ± THIRD ANGLE PROJECTION .0000 ± Important Notice CHKD TOLERANCES EXCEPT AS DIVISION CODE NOTED SCALE DIVISION TOLERANCES EXCEPT AS NOTED MILLIMETERS 0 ± .0 .0 ±.20 .00 ± .10 .00 .000 ± .05 APPVL DATE C This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. 3M Center St. Paul, QSFP+ OPTICAL 4x10Gbps PLUGGABLE TRANSCEIVER INCHES MN 55144 A TITLE ± All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not ± 78-5100-2570-9 A 125 QSFP+ OPTICAL 4x10Gbps .000 ± guaranteed. Before using this product, you must evaluate it and determine if it is suitable for THIRD your intended application. You assume all risks and liability with such 1° SHT 1 OF associated 1 ANGLE PROJECTION .0000 ± PLUGGABLE TRANSCEIVER use. Any statements related to the product which are3not contained in 3M’s current publications, or anyPERcontrary statements MILLIMETERS contained 4 2 INTERPRET 1 on your purchase order shall have no 0 ± ASME Y14.5 - 1994 force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. .0 ±.20 SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS ALL SURFACES MARKED ONLY 125 ANGLES ALL SURFACES ± .00 .000 CAGE NUMBER SIZE DRAWING NO. DET. LISTS MODEL ± .10 ± .05 REV. CAGE NUMBER YES NO 78-5100-2570-9 A DET. MODEL MARKED ONLY ANGLES ± 1° YES NO SHT 1 OF 1 Warranty; Limited Remedy; Limited Liability. LISTS This product will be free from defects in material and manufacture for a period of two years from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT 3 2 1 NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M is a trademark of 3M Company. “RoHS 2011/65/EU” means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. Please recycle. Printed in USA © 3M 2013. All rights reserved. 80-4000-7032-4 In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. 3 Electronic Solutions Division Interconnect Products 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3Mconnectors.com