RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A www.ti.com SCBS845 – MARCH 2002 SERIES 2000 ANTENNAS FEATURES APPLICATIONS • • • • • • • • • • Best in Class Performance Through Patented HDX Technology Protection Class IP 65 and Higher (Exception: RI-ANTG04E) 6 Form Factors available Proven in Harsh Industrial Environments Easy to Install and Use Access Control Vehicle Identification Container Tracking Asset Management Waste Management DESCRIPTION These antenna products connect to Radio Frequency Modules (RFM) and reader/writers to form the interface to the low frequency (LF) 134.2 kHz Texas Instruments transponders. In combination with a reader/writer they transmit energy and signals to the transponder and receive the response from the tag. There are three standard gate antennas (small, medium and large), two standard stick antennas with 1 or 3 meter cable length and a stick antenna specially designed for use with the Mini-RFM available for usage in low frequency systems. Each antenna is capable of creating a specific size and shape of read zone to meet the requirements of the target application. In general the gate antennas create a large read zone including greater read distance, while the stick antennas provide a more focused read zone and an ability to discriminate between transponders. The antennas are well suited for usage in a broad range of applications including, but not limited to, access control, vehicle identification, container tracking, asset management and waste management applications. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2002, Texas Instruments Incorporated RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A www.ti.com SCBS845 – MARCH 2002 GATE ANTENNAS – SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) RI-ANT-G01E RI-ANT-G02E RI-ANT-G04E UNIT Operating Temperature –30 to +60 –30 to +60 –30 to +60 °C Storage Temperature –40 to +70 –40 to +70 –40 to +70 °C OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PART NUMBER PARAMETER 2 RI-ANT-G01E RI-ANT-G02E RI-ANT-G04E UNIT Inductance Typically 27 µH @ 134.2 Typically 27 µH @ 134.2 Typically 26 µH @ 134.2 Protection Class IP 65 IP 65 IP 44 Vibration Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation) Case Material UVSHIPS (UV Stabilized High Impact Polystyrol) Dimensions (mm) 715 ± 5 × 270 ± 3 × 25 ± 1 200 ± 3 × 200 ± 3 × 25 ± 1 1018 ± 5 × 518 ± 5 × 47 ± 5 Weight Typically 745 Typically 425 Typically 2500 g Cable Length 1 1 — m Connection Terminals Spade/Tongue, stud hole 3.5 mm, width 7.5 mm 1/4 inch push-on (automotive type) Mounting Use non-metallic clamps, standard screws and washers through 6.5mm pre-drilled holes, so that the screw hole is flush with the mounting. Mounting material is not supplied with the antenna. Suitable for pole or wall Submit Documentation Feedback kHz RI-ANT-G01E, RI-ANT-G02E, RI-ANT-G04E RI-ANT-S01C, RI-ANT-S02C, RI-ANT-P02A www.ti.com SCBS845 – MARCH 2002 STICK ANTENNAS – SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) RI-ANT-S01C RI-ANT-S02C RI-ANT-P02A (FOR RI-RFM-003B) UNIT Operating Temperature –30 to +70 –30 to +70 –30 to +70 °C Storage Temperature –40 to +85 –40 to +85 –40 to +85 °C OPERATING CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PART NUMBER PARAMETER RI-ANT-S01C RI-ANT-S02C RI-ANT-P02A (FOR RI-RFM-003B) UNIT Inductance Typically 27 µH @ 134.2 Typically 27 µH @ 134.2 Typically 116 µH @ 134.2 Protection Class IP 66 IP 66 Vibration Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation) Case Material Glass reinforced epoxy (grey) Dimensions (mm) 140 ± 2 × 21 ± 2 (dia.) 140 ± 2 × 21 ± 2 (dia.) 133 ± 1 × 21.3 ± 1 (dia.) Weight Typically 134 Typically 185 Typically 105 g Cable Length 1 3 0.1 m Connection Terminals Ring lugs: 3.5 mm inside diameter 7.5 mm outside diameter Ring lugs: Ring lugs: 3.5 mm inside diameter 2.8 mm inside diameter 7.5 mm outside diameter 6.0 mm outside diameter Mounting Use non-metal clamps. Mounting material is not supplied with the antenna. kHz IP 65 Readout Pattern of Ferrite Rod (Stick) and Gate Antennas Trp. 1 reading field Trp. 2 reading field Trp. 1 Trp. 1 Trp. 2 Trp. 2 Stick Antenna Submit Documentation Feedback Gate Antenna 3 PACKAGE OPTION ADDENDUM www.ti.com 31-Jan-2007 PACKAGING INFORMATION Orderable Device Status (1) RI-ANT-G01E ACTIVE 1 1 TBD Call TI Call TI RI-ANT-G02E ACTIVE 1 1 TBD Call TI Call TI RI-ANT-G04E ACTIVE 1 1 TBD Call TI Call TI RI-ANT-S01C-00 ACTIVE 1 1 TBD Call TI Call TI Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Mailing Address: Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated