Not Intended For New Designs
Comlinear CLC206
Overdrive-Protected Wideband Op Amp
General Description
-3dB bandwidth of 180MHz
70MHz large signal bandwidth (20Vpp)
0.1% settling in 19ns
Overdrive protected
Output may be current limited
Stable without compensation
3MΩ inout impedance
Fast, precision A/D conversion
Automatic test equipment
Input/output amplifiers
Photodiode, CCD preamps
High-speed modems, radios
Line drivers
Comlinear CLC206
Overdrive-Protected Wideband Op Amp
August 1996
The CLC206 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions:
CLC206AI -25°C to +85°C 12-pin TO-8 can
CLC206A8C -55°C to +125°C 12-pin TO-8 can,
MIL-STD-883, Level B
CLC206AK -55°C to +125°C 12-pin TO-8 can, features burn-in
and hermetic testing
CLC206AM -55°C to +125°C 12-pin TO-8 can, screened to
Comlinear’s M standard for high
Bottom View
Package Dimensions
Typical Performance
© 1996 National Semiconductor Corporation
Printed in the U.S.A.
CLC206 Electrical Characteristics (Av = +20,Vcc = ±15V, RL = 200Ω, Rf = 2kΩ; unless specified)
Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.
Absolute Maximum Ratings
Recommended Operating Conditions
CLC206 Typical Performance Characteristics
(TA = +25°, Av = +20, VCC = ±15V, RL = 200W; unless specified)
This page intentionally left blank.
Comlinear CLC206
Overdrive-Protected Wideband Op Amp
Customer Design Applications Support
National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018.
Life Support Policy
National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:
1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.
National Semiconductor
National Semiconductor
National Semiconductor
Hong Kong Ltd.
National Semiconductor
Japan Ltd.
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
Fax: (+49) 0-180-530 85 86
E-mail: europe.support.nsc.com
Deutsch Tel: (+49) 0-180-530 85 85
English Tel: (+49) 0-180-532 78 32
Francais Tel: (+49) 0-180-532 93 58
Italiano Tel: (+49) 0-180-534 16 80
13th Floor, Straight Block
Ocean Centre, 5 Canton Road
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.
Lit #150206-004