N CLC520 Amplifier with Voltage Controlled Gain, AGC+Amp General Description Features ■ ■ ■ ■ ■ ■ 160MHz, -3dB bandwidth 2000V/µsec slew rate 0.04% signal nonlinearity at 4Vpp output -43dB feedthrough at 30MHz User adjustable gain range Differential voltage input and single-ended voltage output Applications ■ ■ ■ ■ ■ ■ CLC520AJP -40°C CLC520AJE -40°C CLC520ALC -40°C CLC520AMC -55°C to to to to +85°C +85°C +85°C +125°C Wide-bandwidth AGC systems Automatic signal-leveling Video signal processing Voltage controlled filters Differential amplifier Amplitude modulation CLC520 Amplifier with Voltage Controlled Gain, AGC+Amp June 1999 14-pin plastic DIP 14-pin plastic SOIC dice dice qualified to Method 5008, MIL-STD-883, Level B DESC SMD number: 5962-91694 Pinout DIP & SOIC © 1999 National Semiconductor Corporation Printed in the U.S.A. http://www.national.com CLC520 Electrical Characteristics (Av = +10,Vcc = ±5V, RL = 100Ω, Rf = 1kΩ, Rg = 182Ω, Vg = +2V) Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Absolute Maximum Ratings Miscellaneous Ratings Transistor Count 42 Package Thermal Resistance 2 Package θJC θJA AJP AJE 55°C/W 45°C/W 105°C/W 120°C/W http://www.national.com Typical Performance Characteristics (TA = 25°, Av = +10, VCC = ±5V, RL = 100ΩΩ, 3 Ω, Rg = 182Ω Ω, Vg = +2V ) Rf = 1kΩ http://www.national.com Typical Performance Characteristics (TA = 25°, Av = +10,VCC = ±5V, RL = 100ΩΩ, Rf = 1kΩΩ, Rg = 182ΩΩ,Vg = +2V ) http://www.national.com 4 5 http://www.national.com http://www.national.com 6 This page intentionally left blank. 7 http://www.national.com CLC520 Amplifier with Voltage Controlled Gain, AGC+Amp Customer Design Applications Support National Semiconductor is committed to design excellence. For sales, literature and technical support, call the National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018. Life Support Policy National’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of National Semiconductor Corporation. As used herein: 1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. N National Semiconductor Corporation National Semiconductor Europe National Semiconductor Hong Kong Ltd. National Semiconductor Japan Ltd. 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 Fax: (+49) 0-180-530 85 86 E-mail: europe.support.nsc.com Deutsch Tel: (+49) 0-180-530 85 85 English Tel: (+49) 0-180-532 78 32 Francais Tel: (+49) 0-180-532 93 58 Italiano Tel: (+49) 0-180-534 16 80 2501 Miramar Tower 1-23 Kimberley Road Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. http://www.national.com 8