SMD Low ESR Crystal ABS06-107-32.768kHz-T Pb RoHS/RoHS II Compliant 2.0 x 1.2 x 0.6mm | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • 0.6mm max. height ideal for high density circuit boards • Ceramic package offers excellent environmental & heat resistance • Extended temperature -40°C to +85°C for industrial applications APPLICATIONS: • Wide range in communication & measuring equipment • Commercial & Industrial applications • Wireless communications Overview ABRACON’s ABS06-107-32.768kHz-T Tuning Fork Crystal is optimized for Power Sensitive Designs, requiring minimal plating load (4pF) and Ultra-Low ESR. With guaranteed maximum ESR of 80kΩ, this device is ideally suited for Ultra-Low Power - Real Time Clocking solutions, requiring exceptionally low power consumption (Reference; ST Micro STM32L1, F2 & F4 µcontrollers). Key Attributes • 4pF plating load facilitates sustained oscillations with very low oscillator loop transconductance (gm) < 3µA/V • Guaranteed maximum ESR of 80kΩ ensures lower overall power consumption & higher Gain Margin • Tight Frequency Set Tolerance < ±20 ppm into a 4pF Effective Oscillator Loop Load • Wide Operating Temperature Range (-40ºC to +85ºC) • < ±175 ppm typical stability over -40ºC to +85ºC; ±250 ppm guaranteed; referenced to measured frequency at 25ºC±3ºC • Developed in close-cooperation with ST Micro for STM32L1, F2 & F4 Reference Designs • Space saving 2.0x1.2x0.6 mm, RoHS Compliant SMT package • Low cost, available through Abracon’s Global Distributors Reference Design Information ABS06-107-32.768kHz-T device is Qualified on the following ST Micro’s Reference Designs: STM32F2 Series: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1575 STM32F4 Series: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577 STM32L1 Series: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1295 ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 07.11.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Low ESR Crystal ABS06-107-32.768kHz-T Pb RoHS/RoHS II Compliant 2.0 x 1.2 x 0.6mm | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS: Parameters Minimum Frequency Operation Mode Operating Temperature Storage Temperature Temperature Coefficient: Turn-over temperature: Frequency Stability over temperature Typical Maximum Units 32.768 kHz Flexural Mode (Tuning Fork) -40 +85 -55 +125 -0.039 -0.034 -0.029 +20 +25 +30 ºC ºC ppm/T² ºC -250 < ±175 +250 ppm Equivalent series resistance (R1) Shunt Capacitance (C0) Load capacitance (CL) 3.90 < 60 < 1.50 4.00 80 1.70 4.10 kΩ pF pF Frequency Tolerance @+25°C -20 +20 ppm 0.5 µW 3 ppm MΩ Drive Level Q value Aging@25°C±3°C Insulation Resistance 9000 -3 500 0.1 20,000 otes Relative to the measured frequency at 25ºC ± 3ºC See Note#1 See Note#2 Tested at 0.5µW First year @ 100Vdc ± 15V Note #1: The oscillator loop needs to present an effective loop capacitance of 4.0 pF, not to exceed 4.50 pF. This loop capacitance is required to ensure Safety Factor of > 5.0 for the entire population of crystals. Note #2: With an effective loop capacitance of 4.0 pF, the oscillator circuit will be with-in (32.768 kHz) ±20 ppm. Depending on production equipment capability, these parts might be tested at a different load, with guaranteed projected performance at 4.0 pF. FREQUENCY VS. TEMPERATURE CHARACTERISTICS : ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 07.11.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Low ESR Crystal ABS06-107-32.768kHz-T Pb RoHS/RoHS II Compliant 2.0 x 1.2 x 0.6mm | | | | | | | | | | | | | | | SPICE MODEL: SPICE Model (based on typical values at 25ºC ± 3ºC): C0 R1 L1 C1 = = = = 1.47 pF 56,974 Ω 6,304 H 3.869 fF PART IDENTIFICATION ABS06-107-32.768 kHz-T OUTLINE DIMENSIONS: Note: Due to material availability, the outline and finish color of the component may vary. This variation in no way affects the electrical performance of the product. Dimensions: inches (mm) REFLOW PROFILE: ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 07.11.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com SMD Low ESR Crystal ABS06-107-32.768kHz-T Pb RoHS/RoHS II Compliant 2.0 x 1.2 x 0.6mm | | | | | | | | | | | | | | | TAPE & REEL: T=Tape and reel (3,000pcs/reel) Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISOISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 07.11.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: ABS06-107-32.768kHz-T