ABRACON AOCJY3

OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY3 Series
Pb
FEATURES:
• 25.4x 25.4 x 13.0 mm Leaded- RoHS Compliant Reflow-able Package
• SC-Cut, High “Q” resonator based design
• Either Sinewave or CMOS RF output
• Available with ±30 ppb over -40°C to +75°C operating temperature Range
• Tighter Stabilities to ±5.0 ppb over 0°C to +50°C also available
• Exceptional long-term Aging of ±500 ppb max. over 10-Year Product Life
• Excellent close-in phase noise (-140 dBc/Hz Typical @100 Hz offset; 10MHz carrier)
RoHS
Compliant
25.4x 25.4 x 13.0 mm
| | | | | | | | | | | | | |
APPLICATIONS:
• Cellular Infrastructure
• Radar Systems
• Test & Measurement Equipment
• GPS Tracking with precision hold-over accuracy
• WiMax / WLAN
STANDARD SPECIFICATIONS:
Parameters
Minimum
Typical
Maximum
Units
RF Output
Frequency
10.00
Standard Available Frequencie
s
100.00
10.00, 12.80, 13.00, 26.00,
MHz
Notes
Overall Frequency
range
38.88, 40.00, 100.00 MHz
CMOS
Waveform
Level "1" (Logic High)
0.9*Vdd
Level "0" (Logic Low)
0.1*Vdd
Load
15
45
Waveform
(Note #1)
Volts
(Note #1)
pf
Rise & Fall Time
Duty Cycle
Volts
6.0
ns
55
%
Sinewave
Peak Power
2.00
Output Load
dBm
50
Short Term Stability
1x10
Ω
-10
Alan Variance
75
ºC
±5.00
ppb
Default Spec.
±10.00
ppb
Option “E”
±30.00
ppb
Option “F”
±2.00
ppb
±2.00
ppb
±30.00
ppb
Power Consumption @ turn on
3.60
Watts
Power Consumption Steady State
1.20
Watts
3.46
Volts
Operable Temperature Range
-40
/second
See Stability Options
Frequency Stability Options
0º C to +50ºC
(Note #2)
-20º C to +70ºC
-40º C to +75ºC
Frequency Stability vs. Supply
Voltage (Vdd ± 5%)
Frequency Stability vs. Load Variation
(± 10%)
Warm-Up @ 25 ºC
Supply Voltage (Vdd)
Note #1:
Note #2:
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
3.13
3.30
In < 3-minutes
See Options
When Vdd=12.0V; Level “1” = 4.50 V minimum; Level “0” = 0.50V maximum
±5.00 ppb stability is only available for F0
< 40MHz. For frequencies above 40MHz, the best available
frequency stability is ±10.00 ppb over -20°C to +70°C
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY3 Series
Pb
RoHS
Compliant
25.4x 25.4 x 13.0 mm
| | | | | | | | | | | | | |
STANDARD SPECIFICATIONS - continued.
Parameters
Minimum
Typical
Maximum
Units
Notes
Aging
Daily
±1.0
ppb
First Year
±100
ppb
10-Years
±500
ppb
-35
dBc
Spectral Content
Spurious Response
Phase Noise (10MHz Carrier) @ 5V
@ 1
Hz offset
-90
dBc
@ 10
Hz offset
-120
dBc
@ 100
Hz offset
-140
dBc
@ 1,000 Hz offset
-145
dBc
@ 10,000 Hz offset
-155
dBc
Vdd
Volts
Electrical Frequency Adjustment
Control Voltage Range (Vc)
0.0
Frequency Pull Range
±0.700
Frequency Pull Slope
Positive
Control Voltage Port Impedance
Center Control Voltage
ppm
10
(Vdd/2) 0.5
(Note #3)
Control Port Linearity
(Vdd/2)
+0.5
Vdd/2
kΩ
Volts
±10
Center Control
Voltage
%
Reference Voltage (Vdd=3.3V)
2.70
2.80
2.90
Volts
Output @ Pin#4
Reference Voltage (Vdd=5.0V)
4.40
4.50
4.60
Volts
Output @ Pin#4
Reference Voltage (Vdd=12.0V)
4.90
5.00
5.10
Volts
Output @ Pin#4
+100
ºC
Storage Temperature
Note #3:
-40
When Vdd=12.0V, Control Voltage Range is 0.0V to
(2.50V±0.50V)
5.0V and therefore, the Ce
nter Control Voltage is
OPTIONS AND PART IDENTIFICATION (Left blank if standard)
AOCJY3 -
-
Supply Voltage Option
Blank
3.30V
A
5.00V
B
12.00V
Frequency in MHz
Such as; 10.000 MHz
26.000 MHz
100.000 MHz
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
MHz -
-
Temperature Options
E
-20°C to +70°C
F
-40°C to +75°C
RF Output Options
Blank
CMOS
SW
Sinewave
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
OVEN CONTROLLED CRYSTAL OSCILLATOR
AOCJY3 Series
Pb RoHS
Compliant
25.4x 25.4 x 13.0 mm
| | | | | | | | | | | | | | |
OUTLINE DIMENSIONS
PACKAGING: 15 pcs/tray
REFLOW PROFILE:
TS max to TL (Ramp-up Rate)
3°C/second max.
Preheat
Temperature Min. (TS Min.)
150°C
Temperature Typical (T S Typ.)
175°C
Temperature Max. (TS Max.)
200°C
Time (tS)
60 ~ 180 seconds
Ramp-up rate (TL to Tp )
3°C/second max.
Time Maintained Above:
--Temperature (TL)/Time (TL)
217°C/60 ~ 150 seconds
Peak Temperature (Tp)
250°C max. for 10 seconds
Target Peak Temperature (Tp Target)
250°C +0/-5°C
Time within 5°C of actual peak (tp)
20 ~ 40 seconds
Ramp-down Rate
6°C/second max.
Tune 25°C to Peak Temperature (t)
8 minutes max.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
IS
ABRACON
ISO9001:2008
CERTIFIED
RTIFIED
CE
Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com