Tel : 0044 (0)118 979 1238 Fax : 0044 (0)118 979 1283 email : [email protected] ACT534SMX-2 The ACT534SMX-2 family is a low cost, 2 pad, high quality, low aging 5x3.2mm SMD Crystal in a ceramic base / ceramic lid package, glass sealed for good reliability. The wide frequency range and specification options ensure suitability for many applications. APPLICATIONS: Instrumentation, Notebook, Security, Games, Audio-visual, Office automation, Micro Clock, Process Control & Consumer. Specification Parameter Symbol Frequency Range fo Frequency Tolerance (@25°C) Stability over temp range Temp Operating Range Temp Storage Range Equivalent Series Resistance Load Capacitance Shunt Capacitance Drive Level Drive Level Dependency Insulation Resistance Aging Specification Condition 10.0 ~ 12 MHz Refer to table 3: Developed frequencies Please specify 12.001~49.09MHz Fundamental ±20*,±30 & ±50ppm(Std ) Please specify ±20ppm ~ 50ppm (See table 2) Please specify 0~+50°C ~ -20~+70°C(std) ( See table 2) Please specify -40 ~+85°C See table 1 16pF ~ 50pF & Series (16, 20 & 30pF Standard please specify) 5pF max 100µW typical 500µW max f/fo Tc Topr Tstg ESR CL C0 DL DLD2 FDLD IR <12MHz 15max/ 12-20MHz 12 max />20MHz 10 max FL min to max <1.3 500M min ±5ppm p/year* Fa 0.01, ~,100W 6 steps @100V DC (First year max @ 25°C) * A ±3ppm aging p/year part is available as a "semi-custom" device - Please enquire. Table 1 Frequency Range (MHz) 10.000 ~ 11.999 12.000 ~ 14.999 15.000 ~ 49.090 Table 2 Stability Temp ESR ( ) max 80 60 50 Mode / Cut Fundamental / AT Fundamental / AT Fundamental / AT Standard Stabilities +/- 10ppm +/- 20ppm* +/- 30ppm +/- 50ppm 0~+50°C -10+60°C -20~+70°C * Standard -30~+80°C -40~+85°C *±20ppm for frequencies <27MHz please enquire Table 3 Developed Frequencies 10.0MHz - 12.0Mhz 10.000 MHz 11.0592MHz 12.000MHz Others: Enquire Pad Surface Material: Gold (Au) Standard Reel 1K pcs Tolerance TAPE W Wo W1 Lo L1 Ho H1 ±0.2 ±0.05 ±0.1 ±0.1 ±0.1 ±0.05 ±0.1 Dimension 12.0 5.5 5.45 3.5 8.0 0.3 1.6 A ±1 180 REEL B C D ±1 ±0.5 ±0.2 80 13.5 2.0 Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature & Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 2 Issue 7 C1F Date 31-5-2012 SERIES : ACT534MX-2 Part numbering code is BW Example : BW (534SMX-2) Frequency To 99.9999MHz 1st four digits of Frequency & >99.9999MHz 1st five Digits of Frequency Examples 1200 = 12.000MHz 9999 = 99.9999MHz 10000= 100.000MHz 1200 I ( 12.00 MHz) K (±30ppm) G (±30ppm) RO (-20+70) F (16pF) (Fund') C (1K Reel ) - PF (RoHS) Tolerance (±pm) @ 25ºC E G H I L Operating Temperature Range (ºC) 10 20 25 30 50 A E G Load Capacitance pF or Series Resonance) 0~50 -10~60 RO TO VO AA BA DA SR -20+70 Stability Over Operating Temperature (ºC) F I J K O NB: It is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below 10 20 25 30 50 Table 2 Mode F A RoHS Comp' Fundamental 3rd Overtone 16 18 20 24 25 30 SR - PF Package L = Loose C =1K Reels St andard Stabilities Stability Temp ( +/- 10ppm +/- 20ppm* +/- 30ppm +/- 50ppm 0~+50°C -10+60°C -20~+70°C * Standard -30~+80°C -40~+85°C Table 3 *±20ppm for frequencies <27MHz please enquire Developed Frequencies 10.0MHz - 12.0Mhz 10.000 MHz 11.0592MHz 12.000MHz Others: Enquire Full Example Part Number BW1200IKGROFC - PF ( 12.00 MHz) NOTES : 1) Tighter Tolerances and Stabilities and other Operating Temperature Ranges may be available. As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). 2) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such devices would normally be allocated a custom specification part number which is wholly customer specific. ( EG : A 12.00MHz custom ACT534SMX-2 device may have a part number such as BW1200C- C1500-PF) 3) A guide to availability of tighter stabilities appears in the tables above. ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue 7 C1F Date 31-5-2012